Forgot password
Order status
Returns up to 14 days
Options +2 
Products reviews
The piston "flows" through the cylinder, the markings on the piston very clear ,super quality(ALMOT). The head fits well with the cylinder, the piston pin no play. Cylinder and head gaskets made of krygelite, but the head gasket could have a copper ring and not a steel plate.Pivot locking devices could be made of seger rings, and not of shaped,hardened wire. However, the above kit is very much an investment in the reativation of the Dezamet 023 engine.
Reliable opinion
hello super store very good customer approach fast shipping and.Shipping tracking is on + and parts for my project super napeweno I will use again zebra super performamnie
Reliable opinion
Romet 205 ogar Works flawlessly. Easy installation without the use of specialized tools. The cutout in the cylinder makes it easy to slide out the piston along with the rings using your fingers :-)
Reliable opinion
romet ogar 205 1987 seals before mounting require lubrication with silicone for full tightness (which is included in the kit) ! bearings fit all well matched hold a hell of a lot of strength in the crankshafts and on the shafts head gaskets and exhaust flange do not require lubrication with silicone simply are tight simmerings enter with resistance but it is enough to lubricate and hammer a tool for this purpose or a tube perfectly tight I recommend to buy this set and not individually !
Reliable opinion
Hello, I will soon take part in the 24-hour race through Radomsko with the group "Mosquito through Poland",Mosquito 2352 although I still have some older models. The 60" cylinder I bought for myself from you will allow me to be more competitive in this very exciting race which will be held just like the 24 Le Mans race. Please follow us on Facebook June 5 start
Reliable opinion
Hello, I will soon take part in the 24-hour race through Radomsko with the group "Mosquito through Poland",Mosquito 2352 although I still have some older models. The 60" cylinder I bought for myself from you will allow me to be more competitive in this very exciting race which will be held just like the 24 Le Mans race. Please follow us on Facebook June 5 start
Reliable opinion
There is nothing to attach to it, even if I try to force. Visually does not differ in anything from the original decently made. Bought for a black hole, stop listening to those who call it "Chinese almot" etc. and those stories with swollen pistons. quality the same or better than the original. On the other hand, if it's going to be "60 "they could make it for 41 mm bushing diameter.
Reliable opinion
The engine from the ogar transplanted to the stella, The seals are quite good, after screwing everything together it is good to cut them with a scalpel so that they do not protrude beyond the outline of the engine, while the shaft seals were very resistant to entering, one, despite lubrication before installation, was damaged, fortunately I had a spare, the bearings entered without major problems.
Reliable opinion
Both the bearings, simerinigs and seals fit perfectly to my Romet Pegaz 700 moped with 010 engine. The engine runs on the bearings without reservation, while the simerinigs fit well into the holes in the engine. Thanks to the seals, I am assured of no oil leaks as evidenced by the quality of workmanship. I heartily recommend.
Reliable opinion
Set for Motorcycle under the project "doll" - Unfortunately, but the set lacks rings and they should be, the quality is good as well as the workmanship, the lack of these rings is rather the fault of the store, but we are only human so I have nothing against anyone, everything is up for discussion and clarification.
Reliable opinion
My vehicle is a Romet Pony motorcycle. I am currently overhauling my moto. The bearing on the shaft already placed. Everything is running and spinning nicely. The bearing was well lubricated by which brought good results. I personally think it was a good purchase. I recommend.
Reliable opinion
I recommend! Product of good quality, good fit, I did not notice any defects. I used with great pleasure. On my old screws it was a terribly tedious job, and with these no comparison. The quality/price ratio is great.
Reliable opinion
Everything fit nicely on my Romet. Assembling the engine went without any problem thanks to the great fit of the parts. I really recommend this kit. When I need parts again I will order the same thing again without any worries.
Reliable opinion
Romet Ogar 205 - I thought about the choice for a long time, and I do not regret it. The kit is well composed. All components are well matched. The quality of the shaft and cylinder as for me at a very high level. The assembly went smoothly.
Reliable opinion
Product made very well quality better than the original does not have any linting ugly cuts holes made perfectly everything fits nicely material from which it is made looks very durable
Reliable opinion
Engine 023: the set fits 1:1, Plug&Play. I recommend to everyone: the power has noticeably increased, the motor runs much better in the lower rpm range. Quality of workmanship VERY GOOD. I had concerns, but the risk paid off. RECOMMEND.
Reliable opinion
Komar 2351, 1976. The bearing is good, it enters nicely in the crankcases, but it is hard to enter the shaft despite the fact that it was heated, however, this is not a problem. As for the quality, it works very nicely and the quality/price ratio is bdb.
Reliable opinion
Cylinder,piston and rings fit well.Gaskets and slilicone very good,bearings from a very good company,a big advantage is that they are covered,simmerings from good quality rubber.Shaft without play,needle bearing also fit.
Reliable opinion
Romet Motorynka 1980 Motorynka undergoes a major overhaul, I replace all components that are damaged or tired of time :). Good quality goods. Was it worth buying - definitely YES
Reliable opinion
quality of workmanship very good, the sleeve for the pin well fitted, no play on the crank goods really recommendable, fits the engine with the designation (019) 3 gears
Reliable opinion
Romet Ogar 205 vintage 1987 Product 100% as described sensational quality of workmanship I highly recommend this seller professional approach to the customer
Reliable opinion
My bike is an yamaha xt350 of 1991.The Part is like as advertised. The material used in the part it is of good quality. Transport to Portugal very fast. Recommend
Reliable opinion
The bearing is very good quality, works great, works like a dream. Price is very good, it is hard to find such a bearing at such a price for such quality. I recommend
Reliable opinion
Just as I thought everything in excellent condition with no hidden defects. The store as much as possible for a big + if someone wants to restore a vehicle, I highly RECOMMEND.
Reliable opinion
Very good value for money. I was afraid that there would be a problem with the thickness of the pivots or the width of the counterweights, but everything is fine. I recommend
Reliable opinion
The spring ok in length, volume and resistance, but the ball too small and falls into the center of the spring making it necessary to buy a suitable ball.
Reliable opinion
I have a Romet T1-50 ball as well as the spring are very good, not made of just anything and for this I respect the store for not ordering china (pure china)
Reliable opinion
Thank you for the fast delivery. Thanks to your store, the mopeds Stella with dezamet engine will be restored. I recommend your store to my friends.
Reliable opinion
Romet 023 I recommend buying this set for the reason that if you have the whole engine disassembled, then replace everything and not just individual components I recommend
Reliable opinion
The product works great excellent quality comparable to the original I rate the quality / price ratio very good perfect fit of the parts
Reliable opinion
The bearings are very well made and do not rustle at all, simmerings also good nothing leaks. The seals are good, they do not tear easily.
Reliable opinion
komar 2352 - there used to be a screw with a ball and it worked well ( it is now unobtainable ) and this set seems incomplete - it is missing a screw
Reliable opinion
sealer does a very good job, every previous sealer was letting through and this one holds very well nothing drips, does not escape, I highly recommend it
Reliable opinion
Prodotto di ottima qualita spedizioni veloco ottimi comunicazione ci riveremo a presto! Bellissimo sito ben accessoriato di un po di tutto
Reliable opinion
I recommend this kit to everyone, the quality of the components is very good in terms of use and visual. Mounted in ogar 205
Reliable opinion
Hello my motorcycle is a Romet Ogar 205.Ordered parts are very well made they fit in every marked place are great.
Reliable opinion
wsk 125 m06b3, looks and performs just like the original, very fast shipping, I have no reservations. I recommend
Reliable opinion
Everything in the best order, goods as described , very good contact, fast shipping, I will definitely come back here again more than once
Reliable opinion
podstawa jest bardzo ładnie wykonana, lecz otwór na sprezynę jest trochę za głęboki. Mimo tego produkt jest godny polecenia
Reliable opinion
Motorcycle bearings ok, simmerings went in perfectly I recommend. Performance of gaskets super no need to cut anything, they fit perfectly.
Reliable opinion