Forgot password
Order status
Returns up to 14 days
Options +2 
Products reviews
hello super store very good customer approach fast shipping and.Shipping tracking is on + and parts for my project super napeweno I will use again zebra super performamnie
Reliable opinion
romet ogar 205 1987 seals before mounting require lubrication with silicone for full tightness (which is included in the kit) ! bearings fit all well matched hold a hell of a lot of strength in the crankshafts and on the shafts head gaskets and exhaust flange do not require lubrication with silicone simply are tight simmerings enter with resistance but it is enough to lubricate and hammer a tool for this purpose or a tube perfectly tight I recommend to buy this set and not individually !
Reliable opinion
I bought a cog for my motorcycle, I looked at several cogs in stationary stores, I took a chance on this one from Gmoto and what a surprise, what I cared most about was the internal brass bush to have a sufficiently thick wall and length, so that the cog will serve a long time and this Polish-made cog (if it is so, it is an additional advantage) has met my expectations.
Reliable opinion
The engine from the ogar transplanted to the stella, The seals are quite good, after screwing everything together it is good to cut them with a scalpel so that they do not protrude beyond the outline of the engine, while the shaft seals were very resistant to entering, one, despite lubrication before installation, was damaged, fortunately I had a spare, the bearings entered without major problems.
Reliable opinion
Both the bearings, simerinigs and seals fit perfectly to my Romet Pegaz 700 moped with 010 engine. The engine runs on the bearings without reservation, while the simerinigs fit well into the holes in the engine. Thanks to the seals, I am assured of no oil leaks as evidenced by the quality of workmanship. I heartily recommend.
Reliable opinion
My vehicle is a Romet Pony motorcycle. I am currently overhauling my moto. The bearing on the shaft already placed. Everything is running and spinning nicely. The bearing was well lubricated by which brought good results. I personally think it was a good purchase. I recommend.
Reliable opinion
I recommend! Product of good quality, good fit, I did not notice any defects. I used with great pleasure. On my old screws it was a terribly tedious job, and with these no comparison. The quality/price ratio is great.
Reliable opinion
Everything fit nicely on my Romet. Assembling the engine went without any problem thanks to the great fit of the parts. I really recommend this kit. When I need parts again I will order the same thing again without any worries.
Reliable opinion
Product made very well quality better than the original does not have any linting ugly cuts holes made perfectly everything fits nicely material from which it is made looks very durable
Reliable opinion
Komar 2351, 1976. The bearing is good, it enters nicely in the crankcases, but it is hard to enter the shaft despite the fact that it was heated, however, this is not a problem. As for the quality, it works very nicely and the quality/price ratio is bdb.
Reliable opinion
Romet Motorynka 1980 Motorynka undergoes a major overhaul, I replace all components that are damaged or tired of time :). Good quality goods. Was it worth buying - definitely YES
Reliable opinion
quality of workmanship very good, the sleeve for the pin well fitted, no play on the crank goods really recommendable, fits the engine with the designation (019) 3 gears
Reliable opinion
My bike is an yamaha xt350 of 1991.The Part is like as advertised. The material used in the part it is of good quality. Transport to Portugal very fast. Recommend
Reliable opinion
The bearing is very good quality, works great, works like a dream. Price is very good, it is hard to find such a bearing at such a price for such quality. I recommend
Reliable opinion
Just as I thought everything in excellent condition with no hidden defects. The store as much as possible for a big + if someone wants to restore a vehicle, I highly RECOMMEND.
Reliable opinion
Very good value for money. I was afraid that there would be a problem with the thickness of the pivots or the width of the counterweights, but everything is fine. I recommend
Reliable opinion
The spring ok in length, volume and resistance, but the ball too small and falls into the center of the spring making it necessary to buy a suitable ball.
Reliable opinion
I have a Romet T1-50 ball as well as the spring are very good, not made of just anything and for this I respect the store for not ordering china (pure china)
Reliable opinion
Romet kadet Mode very good quality Polish manufacturer.The old mode had very worn teeth by which it beat up 2nd gear, after replacement the problem stopped.
Reliable opinion
Romet 023 I recommend buying this set for the reason that if you have the whole engine disassembled, then replace everything and not just individual components I recommend
Reliable opinion
The product works great excellent quality comparable to the original I rate the quality / price ratio very good perfect fit of the parts
Reliable opinion
The bearings are very well made and do not rustle at all, simmerings also good nothing leaks. The seals are good, they do not tear easily.
Reliable opinion
komar 2352 - there used to be a screw with a ball and it worked well ( it is now unobtainable ) and this set seems incomplete - it is missing a screw
Reliable opinion
sealer does a very good job, every previous sealer was letting through and this one holds very well nothing drips, does not escape, I highly recommend it
Reliable opinion
Romet Motorynka - good product I recommend made according to the art, fits without modifications , the material from which it is made is also in place
Reliable opinion
Motorcycle 50, 1988 The product seems to be well made and does not differ from the original. We will see how it will perform in service.
Reliable opinion
I was looking for a very long time. Only available on Gmoto.pl . Very good quality product. Available immediately and very fast shipping .
Reliable opinion
Hello my motorcycle is a Romet Ogar 205.Ordered parts are very well made they fit in every marked place are great.
Reliable opinion
wsk 125 m06b3, looks and performs just like the original, very fast shipping, I have no reservations. I recommend
Reliable opinion
Everything in the best order, goods as described , very good contact, fast shipping, I will definitely come back here again more than once
Reliable opinion
Motorcycle bearings ok, simmerings went in perfectly I recommend. Performance of gaskets super no need to cut anything, they fit perfectly.
Reliable opinion
romet kadet year 1980 all parts according to the order only lead time could be shorter,besides everything on 5
Reliable opinion
Dezamet 023. put in its place works as expected. Purchased mainly for the spring, predecessors gave vent to creativity.
Reliable opinion
Kit very good for budget engine overhaul for a vehicle that will not be driven too much ideal recommend to all.
Reliable opinion
I recommend the product as described fits perfectly. very good quality silicone as well as a freebie works well
Reliable opinion
Quality adequate to the price ie everything in the best order. Everything works ok, I recommend to all renovating Romet.
Reliable opinion
Dimensions to fit Romet Ogar 200 50cm3. From what I noticed the original I had the same company and flew a few years.
Reliable opinion
mosquito-all parts fit perfectly. Very high quality and aesthetics. And service at the highest level. Greetings
Reliable opinion
The quality of the shaft is adequate to the price, that is, cheap does not mean that good does not fit made of the cheapest steel
Reliable opinion
Great product. Really good fit. I always buy from gmoto if I need good parts at an affordable price.
Reliable opinion