Epoxy glue for metal 5 minutes - syringe - 20-A43

General description

• clean and degrease the surfaces to be repaired and then dry
• use sandpaper or a file to roughen the surface to achieve the desired result
• remove the protection from the applicators and squeeze an equal amount of compound from each tube and mix thoroughly until a uniform gray color is obtained
• apply the finished compound to the surfaces to be repaired
• place the joined parts within 3-5 minutes and then squeeze tightly for at least one hour
• if the ambient temperature is less than 5oC the setting process takes longer
• remove excess glue with a towel or cloth dipped in thinner
• after use, secure the tubes with the attached stopper

Dimensions

• Capacity: 25 ml