Browse by manufacturer
Products reviews
2021-07-04, 22:52
Adam
WSK 125 1979r Reproduction of the original at a high level. I powdercoat the footrest bars always install 4 square hole rubbers (driver and passenger) - they sit very secure and stable. Do not mount them with any grease or other "slip" aids! Just slightly boil them in water and they will go in without a problem.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-08-29, 13:51
Adam
WSK 175 1981. Quality at a very high level - the material used allows for trouble-free installation. However, in recent batches there is a different logo design - deviates slightly from the original. I recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-09-22, 19:19
MARCIN
RECOMMEND !!! Store super :) have all the parts - contact satisfactory.Good quality parts - large selection Fast delivery ! ! ! Effects of work and new parts in the picture :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-09-19, 18:29
Adamsky73
WSK 125 1983. A perfect replica of the original. Fit, aesthetics and quality of rubber exemplary. Installation very easy - you can "warm", but never on grease or other "slippery" specifics.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-25, 11:20
Jarosław
WSK 125 M06 B3, 1984. I heartily recommend these foot rubbers. Very nicely made, aesthetically looking. A little hard to overlap the footplate, but this is rather an advantage :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-07-22, 00:25
Patryk
WSK 125 humpback 1973. Foot rubber almost like the original there was no problem with installation. Material super aesthetics also shipping fast recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-04-09, 09:53
Krystian
Motorcycle M2.Feet well made,quality as much as possible on the plus side,well fitted,I am satisfied with the purchase.I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-30, 09:01
Marcel
Romet 50-T-3 Rubber very good quality, installation was quick and efficient no problems. Product worth recommending
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-12-29, 21:14
Sylwester
Very aesthetically and accurately made, I have already purchased some of these rubbers and can honestly recommend, they do not rub off.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-12-12, 08:49
Marcin
Wsk dudek 175 . Driver's foot rubbers look like original from prl. Very good workmanship, I am satisfied.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-10-28, 13:44
Patryk
Ok, they do their job. They look nice and there is no problem putting them on. I recommend and encourage you to buy
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-11-10, 10:59
Adam
Komar 2350 , ogar 205 . Rubber very well made , installation went without a problem ,
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-07-04, 13:49
Adrian
The parts offered by Gmoto motorcycle store are of the highest quality. Combined with a huge assortment, this store is highly recommended. Nowadays, unfortunately, it is hard to find parts that can enjoy high reliability and even tolerance in their workmanship. By sourcing from Gmoto store I am sure that each part installed in my vintage motorcycles will perform its function 100% and will serve a long time. Gmoto store is a very reliable company to which you can entrust the reliability of your motorcycle. Best regards and I wish you further success in creating an excellent reputation for the store.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-07-04, 13:48
Adrian
The parts offered by Gmoto motorcycle store are of the highest quality. Combined with a huge assortment, this store is highly recommended. Nowadays, unfortunately, it is hard to find parts that can enjoy high reliability and even tolerance in their workmanship. By sourcing from Gmoto store I am sure that each part installed in my vintage motorcycles will perform its function 100% and will serve a long time. Gmoto store is a very reliable company to which you can entrust the reliability of your motorcycle. Best regards and I wish you further success in creating an excellent reputation for the store.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-03-04, 23:37
Jacek
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-05-30, 21:35
Szymon
Romet Ogar 200 '89, Footrests well made, I thought there would be a problem with installation due to the square hole, and thus the inability to rotate the rubber, but it is enough to tap lightly with a hammer to make the rubbers slide into place. As for the aesthetics - on the one hand you can see subtle imperfections in the casting, but they are not too conspicuous, otherwise a very good quality product.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-12-28, 12:12
Adamsky73
WSK 125 B3 1983. Rubbers all the time at the highest level. Reproduction of the original, material and fit without comment. I mount them with automotive upholstery poster, which quickly evaporates and there is no possibility later that the rubber will come off the footplate. You can also help yourself by heating the rubbers in boiling water. I strongly discourage mounting on grease, etc.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-14, 20:41
Marek
The new foot rubbers add a unique charm to the Mosquito. Rubbers glued with tape or even exposing bare wires are no longer frightening. The rubbers purchased in the store are of very good quality, fit perfectly and are even the so-called icing on the cake in the process of renovation and completion of the Mosquito. A small thing but happy.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-05-17, 08:24
Piotr
Very nicely made, the rubber shines like dog bells. The hole they have is 10mm x 10mm. so at mine I had to scoop a little with a rubber hammer but that's the way it's supposed to be if it's going to hold well - the dimensions of the passenger footrest bar are 12mm x 12mm but it went in ;). WSK 125 GIL, M06B3, engine S01-Z3A.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-07-26, 17:17
Jakub
Good rubbers for wski 175, the material is very good, much to be said is unfortunately lies in the aesthetics and fit. A lot of overlap hard to remove; rubbers are hard to get on the footrests, for about 40 minutes I was struggling to get them on, no less I recommend :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-30, 22:09
Adamsky73
The rubbers are made of good material. They have been driven a lot with me and are still "rubber" and no rubbing, cracks, etc. The logo on the original adds all the shine. Installation easy - preferably on "plak" or a spec that provides slip but resists quickly - never on grease.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-09-08, 23:28
Adam
WSK 125 1985. Material ok. the rubbers are "glued" from two halves, but this does not weaken them. I install it "cold" and there are no problems. I will hint that they also fit perfectly on the driver's footrests. The appearance and aesthetics after eliminating the stamping residue - great. I recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-12, 13:20
Michał
Motorcycle wsk 125 year 1979 when installing it is best to grease the rubber slightly to get it to go in, because it is hard, but this shows the good quality of the material. Another drumstick has been with me for 5 years and continues to hold without a single crack. I can heartily recommend this product.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-02-27, 20:43
Antonio
Driver's foot rubber round delux BZPGum Bydgoszcz WSK 125 175 is a solid accessory, improving grip and comfort. Fits perfectly to WSK 125 and 175 models, providing confidence during use. I recommend solidly made.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-09-26, 11:44
Artur
WSK 125 year 1978 Passenger footrests have a nice appearance square hole smaller than the passenger footrests, but after adding a little oil can be stretched with a little resistance, but I guess that's the point to make them stick as they should. I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-08, 11:31
Adam
Product of very good quality, made of good and thick rubber you can see that the product will serve for years. Super presents itself on the motorcycle . Fast shipping of goods and friendly service. I recommend shopping . Greetings
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-02-04, 09:46
Kacper
The rubbers themselves are good but the quality of the materials could have been better for me they did not fit the original footrests for the Komar 2350 but after a little enlargement of the hole with a drill and a day of a little grease they went in without any problems.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-03-31, 23:05
Piotr
Hello Rubbers made perfectly nothing differs from the original, the dimensions, shape and even logo BZP rubber Bydgoszcz reproduced perfectly as on the factory, I recommend to pay a few extra pennies and buy just these!!!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-07-07, 21:58
Krzysztof
'88 Ogar 200. They look much better than the old , taped rubber. They fit quite tightly , but at the same time there is no big problem with installation. At a small cost I changed the appearance of my ogar :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion




