Forgot password
Order status
Free delivery from 150 euro
Front suspension seals
Romet Ogar 200
Price
Sort
Products reviews
Ogar 200 from 88 - bushings go into the shock absorber , but there is no way to insert the lower lag , or after installation the suspension does not have the ability to work. The bushings are very hard - getting them to the right size was not a simple matter , but maybe this will make them last a little :) My suspension had fatal clearances , after replacement everything returned to normal , but I would not want to do it a second time without access to a lathe .
Review translated automatically
Reliable opinion
The workmanship and aesthetics are good but when installing these bushings to the mosquito square with the gears in the handle it does not do much. The outside diameter is too large and so a grinder with a grinding wheel and you have to go as far as you can to change at the flange is hard to reach so you have to hammer in as much as you can at the rest cut off and everything is fine. Perhaps to other mosquitoes fit but here it was as written.
Review translated automatically
Reliable opinion
Ogar 200 from 88. They need to be touched up quite a bit before installation , otherwise the suspension has no way to work , or even no way to insert the lag. Very hard when rolling , so they should last a bit. I would recommend reserving two days to replace the uleas.
Review translated automatically
Reliable opinion
I warmly recommend gmoto.pl store there are many parts for motorcycles and mopeds Parts as described and also fit motorcycles fast shipping and also fast turnaround time parts made of good solid materials
Review translated automatically
Reliable opinion
The bushings fit perfectly, provide perfect guidance, are of good quality. Thanks to them, the suspension works very well, without any play, without any excessive friction. Mosquito with these bushings drives perfectly, the suspension does not mouse over the road.
Review translated automatically
Reliable opinion
Ogar 200 1985 The bushing enters without any problems, however, it should be sanded from the inside because the lag even after lubrication has difficulty to enter the bushing. The quality of the material is perfect, but the fit could be a little better.
Review translated automatically
Reliable opinion
The quality of the plastic and the workmanship itself is very good. Unfortunately, but the bushings are kind of oversized and to install them you need to fit them to the lags. I sanded them from the inside with a multi-sander. Pi fitting is very good. Assembly of Ogar 200
Review translated automatically
Reliable opinion
Romet 50t3 wheels 19 bushings are as tight as virgins, it was necessary to enlarge the inner dimension with sandpaper, when they were not hammered in they fit tip-top and when they were already in the lags there was no option for the telescope to enter.
Review translated automatically
Reliable opinion
The front suspension bushings pressed in without any major problems. It is known that the material after installation reduces its internal dimension so the need to use a reamer. Suspension without play and works properly.
Review translated automatically
Reliable opinion
WSK 125, the so-called Hunchback. Bushings for my model unavailable. The version for Romet was the closest to perfect. 30 minutes of milling machine work and the bushings are perfect. I'm glad that it was possible to find so very similar.
Review translated automatically
Reliable opinion
Romet Ogar 200, does not fit. Too tight need to saw with a file to make the suspension work. Lack of flange causes the bushing to move "up" the telescope
Review translated automatically
Reliable opinion
Ogar 2000/1988. The bushings are made of good material, but the outside and inside diameters had to be matched on a lathe and not everyone has access to a lathe.
Review translated automatically
Reliable opinion
Romet Ogar 200. product as fit as possible, good quality for a good price. I replaced the bushings with new ones in no time. Everything is playing at 102.
Review translated automatically
Reliable opinion
Everything according to the description and with the photo, fits like the original. Fast and hassle-free delivery, I am very satisfied .
Review translated automatically
Reliable opinion
Romet Ogar 200 1988 Similar situation as with the bushing with a flange. It is mandatory to roll the bushing before installation
Review translated automatically
Reliable opinion
Very good product now the suspension no longer has play it flexes and works like new I highly recommend this product.
Review translated automatically
Reliable opinion
The workmanship as well as the reproduction to the original is ok. Fits as much as possible to the fork. (Romet Ogar 200 50cm3).
Review translated automatically
Reliable opinion
Bushing too tight as outside as inside, need to roll li fit. The material itself good.
Review translated automatically
Reliable opinion
It does not fit a narrow fork. Need to look at the dimensions before buying. Quality ok
Review translated automatically
Reliable opinion
I am satisfied with the product, Item well made, everything works beautifully
Review translated automatically
Reliable opinion
Motorcycle TOO tight needs to be redone.
Review translated automatically
Reliable opinion