Forgot password
Order status
Free delivery from 150 euro
Motorcycle bodywork - parts
Romet Komar 50
Manufacturer
Price
Sort
€13.61
Lowest price from 30 days before discount: €19.45
Rubber for rear shock absorber Żak - 137906
Options +2 
Podobne :
Podobne :
from 3
Browse by manufacturer
Products reviews
I own a 1988 Romet Kadet. I bought these rubbers because the old ones had cracked and looked very unsightly. These are the best rubbers I have ever bought. I have never encountered such durable rubbers in my life. You can see that rubber is not equal to rubber. I have always dreamed of such. Installation of these sensational rubbers went very smoothly. I had no problems with pulling the rubbers on the fork. Even my partner said that with these rubbers my equipment looks much better. I am downright delighted. From now on I will buy rubbers only from Gmoto.pl store. Best regards, Delighted Customer :)
Review translated automatically
Reliable opinion
Greetings. I have used the light switch - zinc in my two motorcycles: A '63 Junak m10 and a '66 SHL 175. This product works perfectly in both cases. To the eye it looks excellent, but what is important is also a product that is easy to install and works correctly in further exploration. I recommend, in my case it works without complaint . Regards
Review translated automatically
Reliable opinion
Greetings. This time I applied this product to a WSK B1 motorcycle from 1969. There in the original I had a short starter foot "kopnik". (not folded - the old type) I consciously ordered a longer rubber in order to shorten it accordingly to my own idea. It looks better, sits properly tight and super does its job. I recommend and greetings.
Review translated automatically
Reliable opinion
Hello.I just installed the rubber shock shin guards.They fit perfectly all dimensions as expected.The rubber is of very good quality it is flexible and easy to install.But I have to worry you .I did not need the shin guards for the motorcycle but for my GT Avalanche 3.0 bike for the SR XCM shock absorber they are perfect.Thank you kind regards.
Review translated automatically
Reliable opinion
Romet Ogar 200 1988. The handle is very solidly made of really good quality material, but it could have been fitted better with the handle and the plate (stop). Since the hole for the plate is too short, it could have been done better and fit it perfectly. This detail is the only thing that differs from the original.
Review translated automatically
Reliable opinion
SHL M11 175 Lever very good quality preserved all dimensions and the same assembly is a pleasure fits like the original , and what is important is the galvanic coating which is a very high level I highly recommend
Review translated automatically
Reliable opinion
Greetings. I put such a kicker rubber on my 1977 WSK Garbuska motorcycle. It attaches well, sits well and looks nice with the whole motorcycle. Greetings and recommend.
Review translated automatically
Reliable opinion
RECOMMEND !!! Store super :) have all the parts - contact satisfactory.Good quality parts - large selection Fast delivery ! ! ! Effects of work and new parts in the picture :)
Review translated automatically
Reliable opinion
RECOMMEND !!! Store super :) have all the parts - contact satisfactory.Good quality parts - large selection Fast delivery ! ! ! Effects of work and new parts in the picture :)
Review translated automatically
Reliable opinion
Romet ogar 205 year 1986. lamp fits, very good workmanship everything works electrics perfectly routed inside, i recommend this lamp similar to prl lamps
Review translated automatically
Reliable opinion
I bought the lever for my motorcycle I am very satisfied with it because it is made of good material. I buy all parts on Gmoto I recommend
Review translated automatically
Reliable opinion
I own a Romet Ogar 200 motorcycle and ordered a brake clutch cable clip and it came practically on the 2nd day. I am very satisfied with this purchase.
Review translated automatically
Reliable opinion
Romet pony, year 1988, rubber worthy of recommendation. Gives a lot to the look of the motorcycle. I recommend especially to owners of the version with an oval tank.
Review translated automatically
Reliable opinion
Romet Ogar 200 r.prod 1986. the switch fits perfectly. It works as it should and looks ok, also recommend at my place it works perfectly.
Review translated automatically
Reliable opinion
The hitch dimensionally made exemplary. Fits perfectly both in the handle and in the holes of the steering wheel. The coating is quite durable. Installation is trouble-free.
Review translated automatically
Reliable opinion
I was looking for a long time for a good lamp for my Romet naazczescie found on gmoto. Assembly banalbie simple and satisfaction guaranteed.
Review translated automatically
Reliable opinion
Romet Kadet m-780 Renovation from scratch,for each classic I order parts from gmoto.pl and a voucher would come in handy.Greetings!
Review translated automatically
Reliable opinion
WSK 125 B1 1969. Hitch made very carefully and aesthetically very good galvanic coating I highly RECOMMEND
Review translated automatically
Reliable opinion
WSK 125 M06 B3, 1984. Fits tightly on the kickstand, does not slip off. Rubber of good quality, aesthetically made.
Review translated automatically
Reliable opinion
Motorcycle M2.Rubbers fit perfectly,resembles the orginal,do not fall off,Quality of the product very good.I recommend the purchase
Review translated automatically
Reliable opinion
Romet Komar 2350 fits perfectly, good material, carefully made, I am very satisfied, recommend !
Review translated automatically
Reliable opinion
Fender splash guard is made in a careful way, perfectly fits the fender, quick installation Recommended
Review translated automatically
Reliable opinion
All ok splash guard very good quality as much as possible fit motorcycle romet kadet recommend 100 %
Review translated automatically
Reliable opinion
Great made telescope rubbers, fit 100% no problems at installation I would recommend to anyone.
Review translated automatically
Reliable opinion
All ok rubber very good quality as much as possible fit motorcycle romet kadet recommend 100 %
Review translated automatically
Reliable opinion
Komar 2350 , stickers very nicely made , pattern on the original, bard zo good quality
Review translated automatically
Reliable opinion
Manual gears in the Mosquito everyone knows and their ills too, so I did not expect miracles. My problem was a molded insert, but since I'm trying on a general overhaul I ordered the whole thing hoping that in the end I won't have to fight with the gears. After the first inspection, the quality of the alloy (aluminum?) does not throw off the quality seems quite fragile. This was confirmed during assembly. After assembling it came the moment to tighten the whole thing rigidly to the steering wheel. Unfortunately, I used too much force and the clamp that holds the menatke to the steering wheel shot off. Also, I caution against this, tighten with sensitivity! The whole thing makes up for it with a good fit, no extra drilling, grinding, etc. All screw locations drilled properly. Assemble, lubricate, lightly adjust and the gears go in smoothly, smoothly and, most importantly, do not fall out. Overall at this point I am satisfied despite the adventure with the clamp, we will see how the alloy will stand the test of time and miles.
Review translated automatically
Reliable opinion
The lamp is identical to the original. Plastic and glass parts well made, precise finish. The lamp comes with a clear instruction manual with cable numbering, which helps when connecting. The lamp also has a light switch and an ignition switch, so we have the problem of an additional element out of the way. When assembling, you need to pay attention to the attachment of the cover of the optical element, you can use a rubber mallet for this, because pressing by hand will not do much. In addition, you should take care to clean the holes of the metal plates in the frame (those to which you mount the lamp) so that there is a connection with the ground. It would be worth the lamp to add new mounting screws (screws from an old romeet spoil the effect, collectors know what I mean:), bulb and gasket for the counter. Often when ordering this is forgotten. Romet Ogar 205, model year 1987
Review translated automatically
Reliable opinion
Sensational kit. Everything nicely packed, each bag contains a specific set of screws, for a specific component. Hence, you do not have to think and look for which screw should be for what. An even bigger plus is that you don't have to look for any screws in hardware stores or markets. Here everything is on the spot, the whole set, for each model of Komar. This allows you to more easily approach the issue of overhauling your Komar, disassembling everything and reassembling it. In a word, a revelation. Respect to the people who complete it. A piece of beautiful work.
Review translated automatically
Reliable opinion
Of course, the goods as much as possible to fit a motorcycle which is a WSK 125. The goods in the first term I received damaged (the hole for the cable was missing), but after filing a complaint, the staff ensured that they would send the goods complete, which is a big plus on their part ( in the second term the goods arrived complete and very quickly). I have no objection to discourage the purchase of this merchandise, so I recommend it, because in case of failure of the rope it saves and helps to get home efficiently.
Review translated automatically
Reliable opinion
Moped peda but made in China 2007 year 50 capacity. The product is too weak it let go after 30 min of riding. The hole for the cable was too small I had to enlarge and besides, the broken end of the cable will always be flared and with a larger diameter so you will not do it quickly on the street. I recommend buying a new cable and not playing with replacements. Replacing the cable will do in an hour if you have never done it and the cost is 20 - 30 zl. In the picture it is made of brass and they sent a different one.
Review translated automatically
Reliable opinion
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
Reliable opinion
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
Reliable opinion
The light switch surprised me with the quality of workmanship while the center (switch) does not stand out in any way, the switch housing itself makes the best impression, it is not some thin sheet that bends under your fingers. As far as I am concerned I would buy this interrupter again.
Review translated automatically
Reliable opinion
This fits to Romet Motorynka m301 well. The length is a bit more than original, but no problem. I had two issues with this one: - the switch did not work. A connection problem. Had to remove the switch and do some solving. - The blue wires are not connected to the ground. For some reason the wires do not touch the connection bolt mounting. Need to fix that.
Review translated automatically
Reliable opinion
They seem to be better than the previous black-painted ones, those bent from the weight of the legs, while in my case the problem was that the outer diameter of these rods which gives rubber is 10 mm and not 12 as in the black, I had to press the footrest rubbers on hot glue and surprisingly holds so far.In addition, went in the primer and color to be sure.
Review translated automatically
Reliable opinion
Bushings very solid to rometa kadet fit I bought more as if they died. I recommend the purchase and the store. I am surprised by the honesty of the store. I made an order then a second basket and they returned the cash and made in one order. The second situation with the lamp for rometa cheapened they removed the basket and made with a lower price. I recommend the store
Review translated automatically
Reliable opinion
The sleeve is nowhere near the sleeves coming out in the wsk. In a motorcycle wsk came out with a minimum diameter fi 10mm not threaded and in this case we have a roller furniture nut. This is the first time such a thing has happened to me since I have been shopping in this company. Complain nothing because it is not worth the trouble. Too little value.
Review translated automatically
Reliable opinion
I purchased a switch for a 1977 WSK 125 so-called humpback. It fits, works properly. Only the quality of surface preparation for the application of chrome leaves to be desired. There are visible scratches on the chrome surface of the switch. These are not scratches on the chrome surface so they are visible under the light.
Review translated automatically
Reliable opinion
Romet Ogar 205, well-made set, satisfactory quality and appearance, fits well in the hand, non-slip material is a pleasant alternative to the original plastic handles, increases safety. Installation requires force, but for that the rubber stiffly holds in place, no play.
Review translated automatically
Reliable opinion