Motorcycle clutch
BMW F 650

2020-02-23, 12:41

View original

Tomasz

Bmw f650 1994. Remember to soak the discs in oil , and in my case the service manual for assembly came in handy, because the previous owner / mechanic put many parts together in reverse - confusing the order of spacers with discs, or putting the selector wrong. Replacement can be done yourself, provided that you are a mechanic and know, and in case of complications depend on the service manual if the previous owner put something wrong. The linings themselves look good, they seem to have a larger contact surface (than the previous ones put on), which affects the Plus of course. So far I recommend, we'll see at higher mileage.

Review translated automatically

Reliable opinion

2020-02-23, 12:53

View original

Tomasz

Bmw f650 1994. At the time of purchase I was concerned that the value of 10-15% harder will affect the operation of the clutch handle in such a way that it will be very difficult to press. But fortunately I am positively satisfied. Of course, the springs are harder and you can feel that the handle goes harder, but not in such a way that it makes it difficult to operate. So I'm satisfied, and these few percent more hardness certainly has a positive effect on the strength of the clutch and its operation. Of course, the replacement should be done by a person well versed in mechanics or a mechanic. I recommend

Review translated automatically

Reliable opinion

2025-05-13, 06:20

View original

Jose

Similar to the original ones. When I mounted them, their installation is very precise and fair, because it seems that it does not fit well in the clutch hub, but you can achieve it without problems. I left them 24h in the same oil I used for the bike. I previously cleaned each disc before. When I put them on the part with the sharpest edge goes inward in its installation. Thanks

Review translated automatically

Reliable opinion