Manufacturer
Price
Sort
Podobne :
Browse by manufacturer
Products reviews
2020-02-18, 17:24
Krzysztof
Greetings. I have used the light switch - zinc in my two motorcycles: A '63 Junak m10 and a '66 SHL 175. This product works perfectly in both cases. To the eye it looks excellent, but what is important is also a product that is easy to install and works correctly in further exploration. I recommend, in my case it works without complaint . Regards
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-09-19, 12:32
Sebastian
I own a jawa 50 ogar 200 moped.I purchased an ignition coil for this model and am very pleased with the product. Well made, safely packaged and, of course, efficient. After installation the jawka fired up and I can still enjoy the ride. I highly recommend the product and gmoto.pl store for their professional service and low parts prices.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-10-27, 18:48
Krzysztof
Greetings. SHL M11 from 1966 and SHL M11W from 1967. junak m10 from 1963 and from 1965 are all riding on it at my place. For junak I prefer BOSCH, but also on spark will fly quietly. Good quality product, good old Polish company. I recommend and greetings
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-21, 14:23
Tomasz
The wrench is made of good quality materials. There is nothing to compare to the Chinese. The bolt, as for me, is good because I will not pull the candle too much, but if someone will have trouble unscrewing it can even put a screwdriver :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-09-20, 18:51
Krzysztof
Hello cordially. such a candle I screw in the engine of a motorcycle SHL m11 of 1966 and 1967 (WIND) and Junak M10 of 1963 and 1965. The candle works evenly both in the summer and winter seasons. Good product I recommend and greetings
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-09-20, 17:42
Krzysztof
WSK 1969 year b1, the so-called two-frame. Junak m10 1963 and 1965 SHL 1966 and 1967 All these models have such bulbs. This product rarely burns out for me. The light gives good, installation oki so I recommend and greetings.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-02-05, 18:39
Mateusz
My machine is a 1982 ROMET OGAR 205 with a capacity of 50cc. Signal revelation, gives a slightly louder signal than the original so that everyone can hear it from a distance. The signal fits nicely to the frame of my ROMET.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-10-01, 19:22
Paweł
Pipe without comments. On the other hand, the cable (at this stage of installation I can not comment on the quality) is simply too short by about 10 cm. After installation, I may be able to connect the pipe to the carburetor.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-09-22, 19:17
MARCIN
RECOMMEND !!! Store super :) have all the parts - contact satisfactory.Good quality parts - large selection Fast delivery ! ! ! Effects of work and new parts in the picture :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-11-04, 01:13
Adam
Romet 205 - this time a moped - the cable made exemplary. Soft, but durable braid and a fairly thick wire - easy installation and high resistance to temperature and adverse conditions.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-07-06, 13:41
Adamsky73
WSK 125 B3 1977. In the absence of the original signal - this one fits perfectly. It is smaller, but makes up for it with sound. Installation without problems - price and quality revelation.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-11-09, 11:31
Sebastian
The wrench may be minimally too long, although it depends on what motorcycle you use it for. Overall I am satisfied. In the photo SHL M11, for Romet Ogara 205 perfect.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-12-31, 18:43
Szymon
I purchased a capacitor for a 1980 Jawka M23 with a capacity of 49 cc. After installation in the engine, it works properly. The spark is there, the engine smokes, you can go to the world.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-09-19, 12:43
Sebastian
Jawa 50 ogar 200 received a new capacitor from gmoto.pl. capacitor very good quality. I would also add that the contact with the store is very good.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-01-26, 21:07
tomasz
Romet Ogar 200 r.prod 1986. the switch fits perfectly. It works as it should and looks ok, also recommend at my place it works perfectly.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-23, 13:07
Simson
Headlight spring fits Simson sr 50 easy installation nothing moves or falls out quality of material is very good .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-06, 14:10
PAWEŁ
Pipe not bad but fragile fully shielded candle clamp only on the thread so the thread is destroyed price adekfatna to quality
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-06, 14:06
PAWEŁ
Wire Beru price I saw cheaper semi-flexible strong does not let go of the thread at a distance of 70 cm no loss of power I recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-11-06, 07:52
Kaare
The light springs were a perfect fit for attaching a light insert to the headlight bezel on my Moto Guzzi V50III.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-06-29, 16:42
AnoniM
Romet Ogar 200 A decent condenser for not much money. Works very well so far. I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-02-17, 13:07
DOMINIK
GOOD QUALITY . HANDY ITEM . VISUALLY ALSO OK . MATERIAL FROM WHICH IT WAS MADE SEEMS
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-07-20, 15:07
Miłosz
As for such a low price it is worth buying fits perfectly to Romet ogar 205 so far works well. recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-21, 14:20
Tomasz
Simson s51. Fulfills its purpose and on top of that a cool feature.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-04-12, 17:56
Franciszek
I put the coil on the MZ 250.2 ES TROPHY, late last autumn, so that the motorcycle, practically was already in "winter sleep". When I started riding with the new coil in March this year, unpleasant events began to happen, as the motorcycle had difficulty firing up, and while riding, unexpectedly stopped working. After a while, it was again somehow possible to start the engine, but the ride was uneventful, and I finally put the motor in the garage to determine the cause of the problems. Somewhat accidentally, I brought my hand close to the area of the coil when the motorcycle briefly fired up, and I nearly fell to the ground due to an electric shock, which instead of the spark in the spark plug, accumulated on my person. I don't know if this new coil had a puncture from the beginning, but it certainly does now. So, after using it for a short time, I know that this coil, is not suitable for operation. It brought me a lot of worry, because I did not suspect that a new product, could be so unreliable. Refers to the purchase of November 2018 - order 497413
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-03-04, 23:37
Jacek
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-09-13, 22:56
Patryk
Romet Zetka 50 The cable is of high quality workmanship, 1 meter of cable should be completely sufficient for most motorcycles - it can be trimmed if necessary. There is enough copper in the cable, the rubber is stiff and should not fray over the next couple of seasons. After putting it on the moped, the acceleration improved, the jerking caused by the misfiring stopped. Highly recommended!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-04-08, 20:53
Gwalbert
Hello I own a Romet ogar 200 the list of works to do as it is in 1987 vintage did not encourage to start work I started looking for parts and surprise gmoto huge parts great description affordable prices quality very good. Understandable descriptions cool kits. First purchase for 500 zloty in two days delivery. More parts in the basket and more and more knowledge Thank you and recommend. Gwalbert
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-06-29, 07:12
Karol
MZ ETZ 250 1983 For the price, the wrench is really well made, so you can be sure that it will not fall apart at the first better unscrewing of the plug, as is sometimes the case with Chinese products made of thin sheet metal. The only drawback is the length of this pin - it should be about 5 cm longer. If the candle is screwed in tighter, you need to spin through a rag or replace it with a longer rod.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-04-09, 16:36
Daniel
Ignition pipe bought for a WSK 125 motorcycle, at first glance it looks perfect, a very important advantage is the covers to protect against moisture or driving in the rain. Why aesthetics "could be better", because the workmanship is good, but not refined. The important thing is that it works as it should, and I am also very satisfied with the service of the GMoto store, also recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-10-15, 09:57
Jan
Small, sleek, handy. Thanks to the removable pin, we have the opportunity to significantly reduce its size, and thus pack it into a handy tool kit. It is not tall, so it will easily fit between the cylinder and the tank on most unicycles. The overall glossy galvanized finish makes a very good impression. In good conscience I recommend it!!!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-09-06, 16:45
Filip
Jawa 50 type 20, I recommend to everyone. At first I thought it would be disgusting to ride with a glowing pipe, but this is nonsense. If a person does not look closely, the light will not see. And from the point of view of operation it is a super solution. You don't have to unscrew the spark plug to check if there is a spark. I sincerely recommend and install in all my Jawkas and Rometas.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-18, 08:19
Pawel
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-18, 08:17
Pawel
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-11-14, 17:21
Mariusz
WSK 175 coil gives spark but the engine did not run properly. I put it in another motorcycle and the same thing, the engine only ran at idle and when I added gas it did not go into higher revs. After installing a used PRL coil, the moto runs without problems. Be careful, a new part and there is no assurance that the engine will work properly.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-04-05, 09:55
Marek
Hello .Evaluating this product , I will write briefly . The product matched perfectly to my lamp not some counterfeit from the east , you can see that the material from which the spring is made is of high quality and I am sure that the glass mounted on this spring will certainly hold firmly in the housing of the lamp. I recommend for sure.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-03-18, 19:33
ADAM
The signal fits the WSK 125 motorcycle perfectly - it replaces the weak factory horn. I will place it in the housing of the original one and without changing the appearance of the motorcycle I will be sure that I can be heard ;) I recommend the product - it is well made and serves its purpose in 101%. For these few zlotys I could not find anything better.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-31, 09:41
Miklós
A weboldal tökéletes, minden igényt kielégítő. A szállítás még így is, hogy nemzetközi (Lengyel - Magyar) gyorsabb volt, mint sokszor Magyarországon belüli szállítás. A kifizetett alkatrészekről, a csomagom állapotáról folyamatos jelzést kaptam. Az alkatrészekkel 100 %-ban elégedett vagyok :-) *****+*
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-03-13, 20:19
Jakub
Headlight springs do their job perfectly, very well press the rim of the lamp to the reflector, they are bent at a slightly smaller angle than the original but this does not affect the quality and fit. I highly recommend gmoto store, very good quality parts and you can easily find everything.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-03-13, 14:40
Oliwier
I own a 2008 Yamaha TZR 50 brand motorcycle the installation of the product was fabulously easy no effort required the product fulfilled its task 100% if someone is looking for an ignition pipe I recommend this model, because it is an excellent quality product. I heartily recommend and greetings.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-05-06, 10:11
Kordian
Purchase very solid and durable. Fits the ignition coil perfectly as well as the spark plug. I have not seen any ignition pipe that holds so tightly. The product is very well made, close to the original. The rubber on the pipe is also a very good idea, as it insulates the plugs from water, etc.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion



























