Forgot password
Order status
Free delivery from 150 euro
Motorcycle engine bearings and seals
WFM M06 125
Manufacturer
Price
Sort
€4.03
FAG 6004 bearing
€4.25
FAG 6203 C3 bearing
€24.91
SKF WSK 125 bearing set
€9.25
FAG 16004 C3 bearing
Browse by manufacturer
Products reviews
Greetings. WSK B1 from 1969 I was replacing the seals in the engine, which has its years and its wear of material, I bought in the store an oring of the same dimensions and it did not do its job as it was leaking so it was leaking so I ordered and put on the above product and the problem with oil leakage stopped (seemingly the same and not the same). I recommend and greetings.
Review translated automatically
Reliable opinion
Greetings. WSK B1 from 1969.Together with the replacement of the o-ring of the shift shaft I did the replacement of the starter shaft seal. The product of good quality, the replacement went correctly and smoothly and, most importantly, there is no oil leakage. I recommend and greetings.
Review translated automatically
Reliable opinion
WSK 125 1981. An indispensable set of safety features. I especially appreciate the parts for the clutch basket - they fit as needed. The material without reservations. I assemble engines only on these kits and it is ok.
Review translated automatically
Reliable opinion
Oring wykorzysatnay in WSK 125, made of very good material, very good size, product as described.
Review translated automatically
Reliable opinion
The o-ring is made of good quality material, matches the description in the ad, and is at a very good price.
Review translated automatically
Reliable opinion
Hello, sealers very good quality everything fits perfectly, can sincerely recommend, greetings.
Review translated automatically
Reliable opinion
My comment will be the same for almost 10 parts (and that's not the end), because each of them helps me to put back on my childhood dream, my father's WSK motorcycle from the old days, neglected by time :) As for the quality, it's what I expected, which is great, service too, shipping also at a high level. This is the first time I used GMOTO but certainly not the last, because I am very positively surprised. I heartily recommend and will definitely come back for more :)
Review translated automatically
Reliable opinion
My comment will be the same for almost 10 parts (and that's not the end), because each of them helps me to put back on my childhood dream, my father's WSK motorcycle from the old days, neglected by time :) As for the quality, it's what I expected, which is great, service too, shipping also at a high level. This is the first time I used GMOTO but certainly not the last, because I am very positively surprised. I heartily recommend and will definitely come back for more :)
Review translated automatically
Reliable opinion
My comment will be the same for almost 10 parts (and that's not the end), because each of them helps me to put back on my childhood dream, my father's WSK motorcycle from the old days, neglected by time :) As for the quality, it's what I expected, which is great, service too, shipping also at a high level. This is the first time I used GMOTO but certainly not the last, because I am very positively surprised. I heartily recommend and will definitely come back for more :)
Review translated automatically
Reliable opinion
Hi I am Patryk and I own a 1962 WSK 125 m06 z2 , and I buy all parts and accessories from GMOTO. The parts are always matched and good quality.They are well packed and protected in the package. I highly recommend this store just in time to buy parts for our vintage motorcycles.Regards
Review translated automatically
Reliable opinion
Hi I am Patryk and I own a 1962 WSK 125 m06 z2 , and I buy all parts and accessories from GMOTO. The parts are always matched and good quality.They are well packed and protected in the package. I highly recommend this store just in time to buy parts for our vintage motorcycles.Regards
Review translated automatically
Reliable opinion
Hi I am Patryk and I own a 1962 WSK 125 m06 z2 , and I buy all parts and accessories from GMOTO. The parts are always matched and good quality.They are well packed and protected in the package. I highly recommend this store just in time to buy parts for our vintage motorcycles.Regards
Review translated automatically
Reliable opinion
Hi I am Patryk and I own a 1962 WSK 125 m06 z2 , and I buy all parts and accessories from GMOTO. The parts are always matched and good quality.They are well packed and protected in the package. I highly recommend this store just in time to buy parts for our vintage motorcycles.Regards
Review translated automatically
Reliable opinion
I highly recommend these bearings. As you know SKF has always been a top brand and here it is confirmed. The workmanship is aesthetically pleasing, they do not jam or anything like that as in the competition already at the start. Dimensionally very well. After installation, the tailstock cycles like a dream. I recommend
Review translated automatically
Reliable opinion
Oring made of very good material.The fit of the dimensions perfect , so there was not the slightest problem with the assembly of the entire subassembly.Definitely recommend to all those planning an overhaul, because at a small cost you will get rid of the problem of leakage.
Review translated automatically
Reliable opinion
All locks fit in the S01 engine, no problem with the installation of the components into place, the lock washers are made of good quality material, they are not soft so we are 100% sure that nothing will not unscrew during the operation of the engine
Review translated automatically
Reliable opinion
My vehicle is a Romet Pony motorcycle. I am currently overhauling my moto. The bearing on the shaft already placed. Everything is running and spinning nicely. The bearing was well lubricated by which brought good results. I personally think it was a good purchase. I recommend.
Review translated automatically
Reliable opinion
Super, extra, phenomenal because they sent this and that. The transaction like a fairy tale until they are wet my panties. Seller wonderful, worth recommending and praise. I will say briefly, because here narrow are the opinions of the framework: sell to Him, buy from Him or apply to the wound. RECOMMEND!
Review translated automatically
Reliable opinion
Super, extra, phenomenal because they sent this and that. The transaction like a fairy tale until they are wet my panties. Seller wonderful, worth recommending and praise. I will say briefly, because here narrow are the opinions of the framework: sell to Him, buy from Him or apply to the wound. RECOMMEND!
Review translated automatically
Reliable opinion
Simmering of the gearshaft for a WSK 125 motorcycle enters with slight resistance, it does not leak. The only unpleasant surprise was a spring popping out of the groove in it, fortunately I noticed it in time and pulled it out of the engine.
Review translated automatically
Reliable opinion
I bought bearings for derbi sendy 50 bearings are very strong and durable I have already ridden 500 km and they perform very well.Thanks also to gmoto company for being and helping us motorcyclists to provide parts and create a common bond
Review translated automatically
Reliable opinion
Komar 2351, 1976. The bearing is good, it enters nicely in the crankcases, but it is hard to enter the shaft despite the fact that it was heated, however, this is not a problem. As for the quality, it works very nicely and the quality/price ratio is bdb.
Review translated automatically
Reliable opinion
komar sport 2361 engine s38- undersized simmerers - did not want to fit into the sockets in the crankcase, broken when trying to install - they had too large outside diameter (I bought others and with the installation there was no problem)
Review translated automatically
Reliable opinion
The o-ring was purchased for my WSK'i 125, because it needed a minor repair, as it was losing some oil, the fitting and installation went well, nothing had to be combined or replaced, I recommend
Review translated automatically
Reliable opinion
The o-ring was purchased for my WSK'i, because it needed a minor repair, as it was losing some oil, the fitting and installation went well, nothing had to be combined or replaced, I recommend
Review translated automatically
Reliable opinion
WSK 125 ccm, M06B-3, 77r. aesthetically made and packaged in the company bag, the spring does not pop out, fits well and more importantly nothing leaks, I recommend greetings from Swidnik area
Review translated automatically
Reliable opinion
MZ ETZ 250 - simmering 25x35x7 of the gearshaft . He went in place of the original fit , the difference (other than the wear of the original) I did not notice. Oil stopped leaking.
Review translated automatically
Reliable opinion
I ordered according to me a set of two bearings and received one I don't know if I misunderstood the offer but a set for a wheel is two bearings.
Review translated automatically
Reliable opinion
Product as described, good quality. The package came as usual quickly and without any complications. I recommend this store.
Review translated automatically
Reliable opinion
I bought the parts to restore my WFM 125 1956 - the part fits , express delivery , contact super . recommend .
Review translated automatically
Reliable opinion
Hello bearing fits very well for Dezament 019 engines so called 3 gear. The workmanship quality is very good. I recommend!
Review translated automatically
Reliable opinion
very good bearing,workmanship and quality of materials used at a high level,recommend as much as possible for the engine
Review translated automatically
Reliable opinion
Solid bearing. Fitted to SHL M11 engine S32. Everything fit.
Review translated automatically
Reliable opinion