Motorcycle engine - parts
Ducati Panigale 955

2020-07-30, 12:06

View original

Darek

The screw is made with precision. I just pay attention to the assembly! The original screw is at least twice as long. The torque recommended in the service book (43Nm) is far too much for a Yamaha Thundercat, fekt is a broken thread.

Review translated automatically

Reliable opinion

2021-04-19, 21:18

View original

Bartłomiej

I took apart the motorcycle a little more, and when I removed the intake ducts into which the carburetor enters it turned out that the old gaskets did not hold, you could see blowouts on the head (as if the fire from the chamber was coming back), well after replacing with new gaskets there is no problem adjusting the carburetor.

Review translated automatically

Reliable opinion

2024-09-19, 08:55

View original

BOULET-DESBAREAU

The product is very similar to the original. The only fault is that the threaded end is too short compared to the original. It's missing about 5 to 8 mm. This damaged the threads on my housing. I had to dismantle everything and redo the threading with ilsert.

Review translated automatically

Reliable opinion

2020-11-22, 15:13

View original

Jacek

Yamaha XVS 1300 CU year 2014 The bolt is shorter than the original and does not hold the size of the original bolt. It should not be indicated to fit this model. The only use for it is a copper gasket.

Review translated automatically

Reliable opinion

2024-07-26, 14:33

View original

Jakub

Prroduct good quality.Conforms to the original. Assembly did not cause any difficulties during installation.

Review translated automatically

Reliable opinion

2021-02-10, 23:44

View original

Kenobi

Suzuki Burgman 650 EXE 2008. Gaskets of good material in perfect size.

Review translated automatically

Reliable opinion