Forgot password
Order status
Free delivery from 150 euro
Manufacturer
Price
Sort
€3.81
Lowest price from 30 days before discount: €4.01
Athena Honda CBX 1000 79-80 cylinder gasket OEM: 12191422010 - S410210001351
€24.69
VALVE SHIM TOOL - 08-0018
€17.36
NEUTRAL SWITCH - 12-0071W
€20.37
VALVE SEAL - 71016-4
€25.41
CYLINDER BASE GASKET - C8342
![JMP 25 valve plate [2.70 mm].](https://img.gmoto.pl/175948/plytka-zaworowa-jmp-25-270-mm_1_m2.webp)
Options +2 €74.97
Lowest price from 30 days before discount: €83.30
DID timing chain SCA0412ASV-120 open timing chain with lugs
(6) 
from 2
Browse by manufacturer
Products reviews
I do not recommend this plug absolutely. The plug did not withstand the first tightening with a torque wrench much before reaching the proper tightening torque. I can't tell where the positive comments under this product come from, maybe with larger diameter plugs it is better. In my case, a simple oil change ended up with a whole day of disassembling and putting the motorcycle back together to remove the broken thread and the magnesium that fell inside the oil pan. The fit itself is not right either, the original plug has more than twice the thread length.
Review translated automatically
Reliable opinion
Honda NX 500 Dominator 1988 It fits perfectly. It is solid and when it came in contact with the wrench cap, it did not behave like plasticine unlike the old screw. I have already done 1500 kilometers. All in good order. An interesting option with a magnetic tip. I recommend.
Review translated automatically
Reliable opinion
Hello I own a Honda VTR1000 F 1997 I bought a mirror for a small amount of money which is durable, not like the Chinese crap that folds at higher speed and vibrates at slow speed. With a clear conscience I recommend Gmoto.pl store
Review translated automatically
Reliable opinion
1. bolt 12, which is a size 17? The threads fit, but. 2. it cracked while screwing leaving a piece of thread in the oil pan. 3. want to experience a heart attack during an oil change? Only 14.80!
Review translated automatically
Reliable opinion
The screw is professionally made, it holds until nice. It certainly does not drop a drop. The magnet attached to its end is so strong that I had a hard time detaching it from the tool cart. I recommend
Review translated automatically
Reliable opinion
Good copper pad a lot of size options price good relative to the quality of workmanship well here I really order everything I need from gmoto and I am always satisfied.
Review translated automatically
Reliable opinion
Fits Honda cb 650 Very good replacement Professional advice, very good knowledge of motorcycles by the Goto. pl crew. I recommend
Review translated automatically
Reliable opinion
The thread of the plug ok and basically that's it. Unfortunately, the magnet practically does not do its job. It's a waste of money for this particular plug.
Review translated automatically
Reliable opinion
![Rogério - JMP 25 valve plate [2.70 mm].](https://gmoto.pl/var/opinion_images/gmoto/i-got-an-yamaha-xt350-of-1991-573051.webp)
I got an yamaha xt350 of 1991. I am very glad with this item. Very good quality / price. Recomend it.
Review translated automatically
Reliable opinion
![Mateusz - JMP 25 valve plate [2.70 mm].](https://gmoto.ie/assets/images/no-photo.png)
Replacement with JMP plates helped, I used them in the Triumph Rocket III as to the quality I can only say after a longer use so far everything is ok and from the appearance and external treatment looks good probably I would know more if I measured it with a micrometer screw and for example hardness but I did not do this only after putting it on I measured the valve clearances again and checked that they met my initial assumptions . After replacement the motorcycle again runs quietly and ignites without any problem on the shot greetings
Review translated automatically
Reliable opinion
For my Hondas FT 500 (1983) & XBR 500 (1986) as spares. Remove the lever first, then punch out the old one from the contact pins side; it's an easy, light press fit. When pressing in the new one, align the hook on the switch with the notch in the clutch lever body. Note the hole in the switch also lines up with a hole at the underside of the alu body; it's for contact spray when needed. (Better use it before needed; once corroded the inner contact becomes difficult).
Review translated automatically
Reliable opinion
Affairs, it conducts electricity. However, it does not fit the 1976 GL1000 K1 model, as it has a larger diameter than the original (factory) and will not go into the hole in the handle holder. I had to take the original one apart despite the damage and was able to repair it. Perhaps this one will fit the specified GL1000 78-79 but I will check this when I give it to a colleague. It would be good to have the basic dimensions plotted on the parts in the photo to see if it will fit us.
Review translated automatically
Reliable opinion
Honda Dominator NX650 If you are asking yourself whether it makes sense to buy motorcycle accessories by mail order, then calculate the time spent in traffic jams to drive to the stores in search of selected items. My calculation indicates that for a few zlotys it's not worth it to run the car. On Gmoto I found everything I need. Both the price and delivery time are exemplary. I recommend.
Review translated automatically
Reliable opinion
My machines WSK M06B3 72r , Jawa 350 TS,Minsk 400, I have been sourcing parts from GMOTO for some time, I recommend because of the sufficient description of products, conformity of parts with the description, fast shipping, great contact. I am passionate about extinct motorcycles (demoluds to be precise), so I require a lot from the goods and here I find it,without unnecessary fuss.
Review translated automatically
Reliable opinion
I own a 2008 Honda Varadero 125XL Motorcycle.For proper operation, it is necessary to change the oil in the engine at the beginning of each season. In these changes, the oil drain plug gasket should be replaced periodically. Good gaskets are copper gaskets, which I purchased from Gmoto.pl and their quality is very good at an attractive price. I recommend.
Review translated automatically
Reliable opinion
The pad does its job. The best part, however, is that the store has well-matched parts for the motorcycle model. With many sizes of washers, it's important to buy the right one so that when you drain the oil from the engine, you don't have to look for the right one. We use a new one and we're done ;)
Review translated automatically
Reliable opinion
I use exactly this magnetic oil drain screw in every Honda I have. The screw, despite exposure to harsh weather conditions, does not corrode, does not catch deposits and, most importantly, does not leak. The magnet actually catches metallic flecks and does not lose strength.
Review translated automatically
Reliable opinion
A washer made of good copper. It fit under the drain bolt on the Honda CBR125R. Remember to warm up the engine before changing the oil. When the oil has already fried a sturdy bottom so that the washer does not come in contact with the old oil.
Review translated automatically
Reliable opinion
Fast delivery, excellent quality! Sterilely packed and clean, exactly the same as in the picture! The quality shows
Review translated automatically
Reliable opinion
Honda XL 500 1982 everything as it should look and work build quality very good and price
Review translated automatically
Reliable opinion