Motorcycle engine - parts
Honda CG 125

2020-09-26, 09:52

View original

Jacek

I have a 2003 Honda XR 125 L. I was replacing the clutch now for the second time, the discs worked fine, they really lasted with me for about 10,000km. Now I installed them for the second time and everything went without the slightest problem. (Psst. Make sure that for your motorcycle you don't need any specialized key in the motorcycle manual and check how many discs are needed for your motorcycle, in my honda - 5)

Review translated automatically

Reliable opinion

2020-09-26, 10:01

View original

Jacek

I have a 2003 Honda XR 125 L. I am replacing the clutch for the second time (after 10,000km) with hard off-road and city riding. Metal discs passed the test that's why I buy them for the second time. Installation without a problem, but remember the specialized keys for your motorcycle, and the clutch cover gasket.

Review translated automatically

Reliable opinion

2020-02-25, 22:48

View original

Johan

For my Hondas FT 500 (1983) & XBR 500 (1986) as spares. Remove the lever first, then punch out the old one from the contact pins side; it's an easy, light press fit. When pressing in the new one, align the hook on the switch with the notch in the clutch lever body. Note the hole in the switch also lines up with a hole at the underside of the alu body; it's for contact spray when needed. (Better use it before needed; once corroded the inner contact becomes difficult).

Review translated automatically

Reliable opinion

2024-03-04, 06:42

View original

Łukasz

Affairs, it conducts electricity. However, it does not fit the 1976 GL1000 K1 model, as it has a larger diameter than the original (factory) and will not go into the hole in the handle holder. I had to take the original one apart despite the damage and was able to repair it. Perhaps this one will fit the specified GL1000 78-79 but I will check this when I give it to a colleague. It would be good to have the basic dimensions plotted on the parts in the photo to see if it will fit us.

Review translated automatically

Reliable opinion

2017-04-04, 18:03

View original

Grzegorz

My machines WSK M06B3 72r , Jawa 350 TS,Minsk 400, I have been sourcing parts from GMOTO for some time, I recommend because of the sufficient description of products, conformity of parts with the description, fast shipping, great contact. I am passionate about extinct motorcycles (demoluds to be precise), so I require a lot from the goods and here I find it,without unnecessary fuss.

Review translated automatically

Reliable opinion

2020-09-20, 20:52

View original

Tomasz

Honda XL125. The discs fit perfectly, they seem to be solid. After replacement, the clutch works properly. Unfortunately the spacers do not fit this motorcycle, completely different teeth.

Review translated automatically

Reliable opinion

2024-09-23, 07:32

View original

Thibault

Good product, well fitted, only delivered in sets of four when there were three on disassembly, so the doubt lingered for several minutes.

Review translated automatically

Reliable opinion

2025-08-03, 14:20

View original

Nikolay

Fast delivery, excellent quality! Sterilely packed and clean, exactly the same as in the picture! The quality shows

Review translated automatically

Reliable opinion

2016-02-07, 10:30

View original

marek

valve seals to fit any head 50 cmm 4t very well seal the valves in the scooter,recommend.

Review translated automatically

Reliable opinion

2019-04-08, 08:46

View original

Jacek

Motorcycle brand Honda XR 125 L, 2004 year of production. Installation of the gasket took place without any problems. Recommended.

Review translated automatically

Reliable opinion

2016-04-15, 17:40

View original

Leszek

Great product as described. Everything as expected. Fast delivery.

Review translated automatically

Reliable opinion