Motorcycle engine - parts
Honda GL 1500 Goldwing

2020-07-30, 12:06

View original

Darek

The screw is made with precision. I just pay attention to the assembly! The original screw is at least twice as long. The torque recommended in the service book (43Nm) is far too much for a Yamaha Thundercat, fekt is a broken thread.

Review translated automatically

Reliable opinion

2021-06-08, 07:46

View original

Dariusz

Honda1100XX 1997 very handy lock perfectly fitted, you can safely perform the repair without a second person. Such a lock is safer than a universal one which can lead to damage to the repaired component.

Review translated automatically

Reliable opinion

2020-06-22, 13:07

View original

Stanisław

The whole kit fits perfectly. I recommend to regenerate the baked clutch. Previously it was impossible to move it, now it goes in with fingers without any problems.

Review translated automatically

Reliable opinion

2023-05-24, 10:46

View original

Dawid

A great copper washer for the oil drain bolt. Its main advantage is the right hardness. When tightening, it undergoes plastic deformation, so it perfectly fulfills its role - seals. Beware of washers made of copper alloys. Some of them are so hard that they do not yield even when hit with a hammer - they are not suitable for sealing the oil drain.

Review translated automatically

Reliable opinion

2021-02-07, 13:11

View original

RDS

Some time ago I began to apply the principle of replacing copper washers at the time of oil change (previously I burned out). I must admit that for 1 zl it is not worth fighting with the old washer, especially since you will not get the same effect as with a new one. Now I treat the washer as a mandatory set - I always buy a set of oil + filter + drain bolt washer.

Review translated automatically

Reliable opinion

2021-02-05, 07:32

View original

Marek

Hello, I recently purchased some bearings shown in the ad. They were mounted to the scythe in the mtd tractor. SKF bearings have good strength and fit perfectly in the places for them. The advantage of the product is all kinds of uses, they perform well in any equipment. I recommend to purchase this product. Greetings

Review translated automatically

Reliable opinion

2024-09-19, 08:55

View original

BOULET-DESBAREAU

The product is very similar to the original. The only fault is that the threaded end is too short compared to the original. It's missing about 5 to 8 mm. This damaged the threads on my housing. I had to dismantle everything and redo the threading with ilsert.

Review translated automatically

Reliable opinion

2020-08-18, 22:09

View original

Jakub

When purchased, the bearing had no play, as befits a new bearing. The bearing has many uses. They can be mounted to wheels that are equipped with a drive on which a very high force acts. This bearing will 100% last more than a typical Chinese bearing.

Review translated automatically

Reliable opinion

2025-01-26, 09:45

View original

Pedro

It fits perfectly, on and working. It took ten days to arrive more or less, but the important thing is that the part is fully compatible despite the age of the bike. Vfr 750 f from year 91, in 34 years the first part that breaks.

Review translated automatically

Reliable opinion

2021-06-30, 21:34

View original

Tomasz

Unfortunately it does not fit the Honda CB 450s motorcycle. Not the right size (I was buying a little by feel after the dimensions from the Honda catalog). Fortunately, I had the correct size at my place. Other than that, the aluminum washer without reservation. Greetings

Review translated automatically

Reliable opinion

2023-08-18, 11:07

View original

Artur

Everything ok full professionalism and fast delivery ( everything original) plus for remembering the motorcycle on the website and selecting parts by the selected version I will definitely use this store in the future I recommend it

Review translated automatically

Reliable opinion

2020-11-22, 15:13

View original

Jacek

Yamaha XVS 1300 CU year 2014 The bolt is shorter than the original and does not hold the size of the original bolt. It should not be indicated to fit this model. The only use for it is a copper gasket.

Review translated automatically

Reliable opinion

2025-05-08, 15:14

View original

lespilette

top received on time, perfect service, well packaged, no problem for transport.....good quality product for my Xjr, same as in France

Review translated automatically

Reliable opinion

2025-08-11, 16:49

View original

Ulrich

Fits perfectly. Always happy to return. Good and inexpensive. Do what you are supposed to do - seal. MFG Ulrich Schulzke

Review translated automatically

Reliable opinion

2025-08-03, 14:20

View original

Nikolay

Fast delivery, excellent quality! Sterilely packed and clean, exactly the same as in the picture! The quality shows

Review translated automatically

Reliable opinion

2025-04-06, 09:18

View original

Rauno

very good suitability.

Review translated automatically

Reliable opinion

2024-11-13, 08:21

View original

Marek

I say thank you !!!!!!!!!!!!!!!! Delivered quickly Worth the price Everything fits well!!!!!!!!!!!!!!!!!!!!!

Review translated automatically

Reliable opinion