Forgot password
Order status
Free delivery from 150 euro
Motorcycle engine - parts
SHL M17 175 Gazela
Manufacturer
Price
Sort
Options +7 
średnica:
średnica:
średnica:
Podobne:
średnica:
€5.21
ZKL 6305 bearing
from 2
Browse by manufacturer
Products reviews
WSK 175 KOBUZ 1979r The quality of workmanship is very poor (the problem of putting on the head pins), in addition, all four pieces that I ordered are bent because they have been zastreczczowane together with other items. It would have been enough to cut out two pieces of cardboard, put them in between and tape them together
Review translated automatically
Reliable opinion
wsk 175 wind engine, the seal is made of something that resembles plastic, in the rear part where the gearbox fits, in the front where the crankshaft is shifted by a few centimeters there is no possibility to put it on, it is only suitable for wringing out
Review translated automatically
Reliable opinion
SHL M11 175 Lever very good quality preserved all dimensions and the same assembly is a pleasure fits like the original , and what is important is the galvanic coating which is a very high level I highly recommend
Review translated automatically
Reliable opinion
Thread reduction used to repair the Romet head, fits most of the communist vehicles, it is easy to repair the damaged head yourself, all you need is a drill and a threader of the right size.
Review translated automatically
Reliable opinion
The product is of very good quality, very well fitting and 100% fulfilling its function. You can see to the eye that the product is made of the highest quality material.
Review translated automatically
Reliable opinion
I own a shl m11, the lever fits perfectly, it is very well and aesthetically made, the chrome looks very nice. I think, the product is worth recommending.
Review translated automatically
Reliable opinion
I bought the lever for my motorcycle I am very satisfied with it because it is made of good material. I buy all parts on Gmoto I recommend
Review translated automatically
Reliable opinion
In my opinion, the cognac is just perfect,it was not the cheapest on Allegro but it is worth spending 5 zloty more and have the self-satisfaction of the product
Review translated automatically
Reliable opinion
WSK 125 B3 1979. There used to be problems with the pin falling out of the lever head - recent pieces fortunately made more carefully.
Review translated automatically
Reliable opinion
Used for SHL Gazelle M11 clutch, fits perfectly, good workmanship, goods as described.
Review translated automatically
Reliable opinion
This is the second time I used such a reduction. The first time as well as the second time it fit perfectly. I recommend!!!
Review translated automatically
Reliable opinion
WSK 125 1979. Lever mechanically very solidly made. Aesthetically also at a high level.
Review translated automatically
Reliable opinion
I have a 1980 WSK 175 kobuz motorcycle. The set of bolts I purchased met my expectations, as for the appearance of the length and strength I have no reservations, I can confidently say that they are a faithful copy of the bolts of the era, a nice thing that praises each product individually packaged and described. The purchase and delivery went without any problems. Due to the fact that I still own other PRL motorcycles I will definitely be sourcing spare parts from you. Because these are already motorcycles that require quite a lot of attention and care to make them pleasing to the eye and fun to ride. I can confidently recommend the store to online customers and my friends who, like me, own such gems of Polish technical thought. Best regards and see you next time.
Review translated automatically
Reliable opinion
After 20 years of standing in the garage, I decided to move my '69 wsk 125 m06b01 The euphoria and happiness that accompanied when pulling the classic out of the garage had no limits. However, when it came to starting it. the first kick and felt that the kicker something is not resisting I look cracked. well it's gone. With help came gmoto which delivered in 48 h a new kicker solidly made of decent material. I am satisfied with it and recommend it to other motorcycle users.
Review translated automatically
Reliable opinion
My comment will be the same for almost 10 parts (and that's not the end), because each of them helps me to put back on my childhood dream, my father's WSK motorcycle from the old days, neglected by time :) As for the quality, it's what I expected, which is great, service too, shipping also at a high level. This is the first time I used GMOTO but certainly not the last, because I am very positively surprised. I heartily recommend and will definitely come back for more :)
Review translated automatically
Reliable opinion
The WSK 175 crankcase bushing is a product that exceeded my expectations with its features. I did not think that despite the flooding of the market with Chinese low-quality products, you can still buy a product that meets the rigor of the manufacturer. The sleeve fits perfectly to the crankcase counting the outer diameter and length as well as to the shaft considering the inner diameter. The purchased product does not differ in any way from the original previously installed.
Review translated automatically
Reliable opinion
Like the first gasket papers awesome awesome how well they do their job not one oil leak spectacular awesome awesome awesome I am tremendously grateful for selling such a good quality material ole! ostia lk asbestos are even better for exhaust systems gay god my what a cojonuda solution is wonderful and cuts very well I recommend it more than 200%.
Review translated automatically
Reliable opinion
The ideal thing in a difficult situation when the thread of the plug is already leaking or completely broken. Without having to look for a new head (sometimes unobtainable or at a horrendous price) even in the garage having a stand drill you can repair the damage and continue to enjoy your oldtimer.
Review translated automatically
Reliable opinion
A very rich set of gaskets. Nevertheless, I have doubts about the thickness of the gaskets themselves and whether they will perform their role well enough. Some also stick out quite a bit from the engine giving a not quite expected result. Nevertheless, I recommend it as much as possible.
Review translated automatically
Reliable opinion
Some wonderful gasket sheets seriously I highly recommend them very highly they are amazing awesome seriously you have to try them you lose nothing nothing nothing nothing and when I say nothing nothing is nothing nothing nothing oil they are spectacular really if lks recommend 100%.
Review translated automatically
Reliable opinion
THIS IS AN INDISPENSABLE SCREW STRAIGHT AT THE CRANKSHAFT MUST CHANGE IT NEW THREAD IS ALWAYS NEW AND THE CERTAINTY REMAINS THAT YOU HAVE CHANGED THE FIT AND SAFETY FOR THE ENGINE I DO NOT EVEN THINK WHAT WOULD HAPPEN IF THE OLD UNSCREWED. I RECOMMEND I NOW HAVE PEACE OF MIND
Review translated automatically
Reliable opinion
Super, extra, phenomenal because they sent this and that. The transaction like a fairy tale until they are wet my panties. Seller wonderful, worth recommending and praise. I will say briefly, because here narrow are the opinions of the framework: sell to Him, buy from Him or apply to the wound. RECOMMEND!
Review translated automatically
Reliable opinion
Screws very good quality, after several screwing and unscrewing almost zero trace that they were moved. The only thing I miss is some sort of sorting or description of which screw where, you have to think either by eye or look in the engine diagram.
Review translated automatically
Reliable opinion
WSK 125 1985. Dimensionally perfect. Quality of material not tested so far - a little rust coating on the spacers - this is also a minus. Remnants of machining very lowers the overall rating of the product - you need to file a little. I recommend.
Review translated automatically
Reliable opinion
Tappet made of good material. Tested at a distance of more than 9,000 kilometers performed without complaint. Recommended. More about replacement equipment for long distance travel at: http://125cmmieszanychuczuc.blogspot.com/
Review translated automatically
Reliable opinion
Like the first gasket papers amazing awesome how well they do their job not one spectacular oil leak amazing awesome awesome I am tremendously grateful for selling such a good quality material ole!
Review translated automatically
Reliable opinion
WELL IT IS NECESSARY PEOPLE DO NOT PUT THE OLD OVERTIGHTENED BOLTS WITH BROKEN THREADS DE-TAPPED 100 TIMES IS A SIMPLE AND CHEAP THING BETTER FOR THE LIFE OF THE ENGINE BUY SUCH A NICE SET IS OK AND I MEGA SATISFIED!
Review translated automatically
Reliable opinion
An indispensable piece of replacement equipment for further trips as well as the home workshop. Part of good quality. Recommended. More about replacement equipment for distant travel at: http://125cmmieszanychuczuc.blogspot.com/.
Review translated automatically
Reliable opinion
WSK 125 KOS. After searching half the internet I came across this kickstand and it is definitely better than most other replacements. Solidly made, no problems with installation and most importantly fulfills its role ;). I recommend
Review translated automatically
Reliable opinion
The kicker works very well, it looks very aesthetically pleasing and is also, in my opinion, solid I had experience with others and this product from gmoto finally did not fall apart after a few firings, I recommend to everyone.
Review translated automatically
Reliable opinion
SHLa S - 34 engine all lies like a suit for a wedding. It tightens the starter like a decent panty elastic. The mesh enters the crankcase nicely, like a nail in the board not too light and not too hard but just right. I recommend it for the settee!
Review translated automatically
Reliable opinion
Delivery was fast and efficient parts were delivered in undamaged condition perfectly fit to the motorcycle which is shl m11w from 1968 with w2a engine with a chain clutch with a diameter of roller 6mm
Review translated automatically
Reliable opinion
WSK 175. I recommend the piston 100%. For reasonable money I received a good product. The cylinder with the new piston already in place and the moto rides with me every day to work (despite the -2 - 0 c temps). You can envy ;))
Review translated automatically
Reliable opinion
I made a gasket for the exhaust of a DZIKA (Yes, such an old, truest, good old Dzik). The gasket works well, I recommend it to all who have unusual vehicles and difficulties in selecting the right gasket.
Review translated automatically
Reliable opinion
The thread should be all the way to the end , because it sticks out a lot beyond the outline of the head in the Dezamet engine and as in the Simson S51 engine. You have to grind a lot , but then the thread is too small to screw in. I do not recommend :/
Review translated automatically
Reliable opinion
Mini Pocket Cross Good material for exhaust gasket very practical.In addition, still lubricated with high-temperature silicone creates a perfect seal of the joining surfaces.
Review translated automatically
Reliable opinion
The material is solid, I made a gasket for a power saw under the cylinder and it holds well, I also used it for the crankcase of a motorcycle and there is no leakage either, I recommend. Greetings
Review translated automatically
Reliable opinion
Motorcycle KTM SXC 540 99r I made the gasket of the carcasses, the product is great for this and very good to work with it 100% satisfaction with the product
Review translated automatically
Reliable opinion
the sheet is really big and will be enough for many gaskets, it is made of 2 layers of some non-fusible flexible material and between them is a thin sheet of metal
Review translated automatically
Reliable opinion
You can make your own exhaust gaskets, the quality is good, I have used it to make my own exhaust gaskets between the elbow and the silencer.
Review translated automatically
Reliable opinion