Forgot password
Order status
![Valve Shim HLP 9.48mm [2.20mm]](https://gmoto.ie/assets/images/no-photo.png)
Free delivery from 150 euro
Motorcycle front sprockets (pass)
Manufacturer
Price
Sort
from 28
Browse Motorcycle front sprockets (pass) by manufacturer
Products reviews
I have a motorcycle Junak 905.Its fault was that it does not accelerate in 4th gear, so I decided to buy a 12 tooth sprocket, because I have 13 as standard, so I ordered it.Once it arrived I immediately went to install it simply fit as standard. Now my junak accelerates in 4th gear.
Review translated automatically
Reliable opinion
Very good quality product I rode this sprocket 2 times and even the paint did not come off I highly recommend this product. This is the machine I ride and I take all parts from here. Regards.
Review translated automatically
Reliable opinion
The sprocket is very well made, its installation is simple. After several rides, I have not noticed any signs of wear, and I have noticed an increase in the speed of my motorcycle. Overall, I recommend it!
Review translated automatically
Reliable opinion
Quality ok everything fit without any problem, shipping as usual lightning fast I am satisfied with the purchase, fits perfectly to zipp tracker 125 2016r
Review translated automatically
Reliable opinion
Front sprocket 428 12 teeth very well made with attention to detail fits without any problem I recommend to everyone
Review translated automatically
Reliable opinion
What much to say here, a legan sprocket for a 110cc Quad, for a moped with a 139FMB 50cc engine that is one of the most popular! :) In size 428, which is the "more durable" one, with an H end which means even better hardening and strengthening of the sprocket! Generally when you put it on it IS POWER! ^^ Because, of course, the smaller the sprocket in the front, the more power we have on the rear wheel! But less for the speed. For quads 110cc ideal solution! Because there the power counts the most! My Quad with this sprocket rolls up the asphalt! ;P And on the mud with the gas I have to be careful, because immediately the tunnel to China kicks! ^^ In short, I recommend!
Review translated automatically
Reliable opinion
The sprocket fits perfectly to the Junak RX One 125 Euro 4, despite the fact that on the store's website after selecting this version of Junak, there is information about incompatibility. Also, you can confidently order without worrying whether the screw spacing will fit. The only thing to keep in mind is to make sure whether there are actually 14 teeth in our beast or whether someone has changed to a smaller number. As for the quality I won't comment because the sprocket is freshly installed. But it looks solid. I think that for 10 thousand mileage it will be enough. Greetings
Review translated automatically
Reliable opinion
Howdy.I purchased a 11 tooth front sprocket from gmoto.I was surprised that I only paid 10 zloty for this product as it is from a decent company.I own a street 50 moped and there were no problems with the sprocket.It fits perfectly on a 428 120 link chain.According to me,the power seems to have increased a bit but the v max has decreased.If we try a bit harder and shoot the clutch we will be able to ride on 1 wheel.I warmly and sincerely salute g moto for their excellent and quality products.
Review translated automatically
Reliable opinion
Hello, I have a quad 250 Chinese, I wanted to replace the front sprocket with a new larger one because the old one did not give a lot of speed and satisfaction, I ordered for quad 150 but surprisingly it also fits the 250 I had to move the exhaust pipe a little to install but even so the installation was very easy after assembling the quadzik laughs speeds up to 90 what before was not possible, a product worth recommending.
Review translated automatically
Reliable opinion
Toros El Viento 125 (Zipp Manic 125) with a 156fmi engine - the original sprocket has 15 teeth, the one with one more i.e. 16z solves the problem of short gears and high shudder. Riding becomes very pleasant, economical satisfying. Quality flawless, everything fits very well.
Review translated automatically
Reliable opinion
I have a Derbi Senda 125 motorcycle and I always order parts for Senda as well as for the scooter only on Gmoto, because I believe that here are good quality products as well as at affordable prices and fast delivery, and the installation of the sprocket went quickly and smoothly for me without any problem. I recommend the company Gmoto.pl
Review translated automatically
Reliable opinion
Motorcycle Romet IJ 250-5 year prod 2008.Gear baavery strong, security perfectly fitted. Assembly in a minute. Revelation at this price. Thanks to the fact that it has 17 teeth the engine does not get tired, extended gear ratio. And the speed increased by at least 15 km per h
Review translated automatically
Reliable opinion
I own a 2020 Apollo Avenger 125 Quad the sprocket was easy to install and I think it is made of durable material. It looks pretty good for the price, and fits like a glove. The 12 teeth fit perfectly, the chain is not too tight and the quad has better performance.
Review translated automatically
Reliable opinion
So yes the sprocket I ordered is a very good fit for the Honda 450 and very nice to ride however ze first 2 days it was not nice to ride because the sprocket was popping off the shaft but on the 3rd day of riding it is fine I give 5.
Review translated automatically
Reliable opinion
The sprocket is solid where I need it in my motorcycle, the protection is also very good, the quality of the sprocket is also very good I heartily recommend any products from Gmoto. l good quality and fast delivery I recommend ;)
Review translated automatically
Reliable opinion
Hello warmly. Parts ordered for the quad Spyrancing SPY 250F drift.( Generally parts for this model are hard to find)But the company Gmoto ourczęstantly has something for this model. I recommend express shipping
Review translated automatically
Reliable opinion
I own a Router WS 50 I installed this sprocket in 15minutes and I highly recommend it looks very nice and durable I highly recommend the sprocket has already traveled about 500km and shows no signs of use. I recommend
Review translated automatically
Reliable opinion
I own a Quad with a Zongshen 250 liquid-cooled engine. The sprocket fits 100% Made of good quality material, after several "specific" trips no signs of fatigue of the material.I recommend
Review translated automatically
Reliable opinion
yes honestly the sprocket is made well, so far I have not noticed any damage or anything like that. packed also very well, overall there is nothing to complain about so far.
Review translated automatically
Reliable opinion
Loncin 300 sprocket fits like a glove. After several trips you can not see any signs of wear, the new chain does not come off it so the dimensions of the teeth are as correct as possible. I recommend
Review translated automatically
Reliable opinion
I recommend ✌️pasuje for Honda MB 80 1980 installation mileage very fast the sprocket as in the description is 12z you can see that it is made of durable material for this price I highly recommend it
Review translated automatically
Reliable opinion
For gb street 50 fits perfectly. Installation on the seger ring is child's play, everything fits perfectly, the quality of the sprocket very good. I am satisfied, I recommend.
Review translated automatically
Reliable opinion
The product is consistent with the original. Well packaged. Conforms to the description. On the other hand, no information about the fit to my motorcycle. Very good contact with the seller.
Review translated automatically
Reliable opinion
Everything fits like a glove. The quality of the sprocket a little worse than the original, but it should still serve a lot of miles. Very fast shipping and great service. I recommend
Review translated automatically
Reliable opinion
Guowei 50q-d, the sprocket was zomaowed with the numbers 420h 14t, and I got 428 14t the sprocket costs 10 zlotys and for free repatriation you need a product min 30 zlotys.
Review translated automatically
Reliable opinion
I highly recommend to anyone who needs to replace the gears in their quad or cross bike solid material a lot of material on the teeth not like those Chinese replacements
Review translated automatically
Reliable opinion
Good quality at a very good price.It is worth paying attention to the spacing of the security holes, because it may be minimally different from the spacing for the screws in the toebox.
Review translated automatically
Reliable opinion
Zembatka in accordance with the dimensions given in the product description performance I rate it 9/10 I have been using it for 4 weeks now and really little wear effects I recommend
Review translated automatically
Reliable opinion
Quad Bemi Germany, 250ccm, 2008. the part is in accordance with the order, so that the assembly is child's play, a bargain price. Very good quality. I recommend!
Review translated automatically
Reliable opinion
Worked great and fast delivery.item as described and fit perfectly.goods well packaged.will be happy to order from them again. Mfg Karl
Review translated automatically
Reliable opinion
I own a yamasaki ym 50 motorcycle and the installation of the sprocket went very quickly. The sprocket is a very good product that I can heartily recommend.
Review translated automatically
Reliable opinion
I ordered this sprocket for my cross crz 125 4T 2009 year.I judge that this product is very good and solidly made. I recommend very much !
Review translated automatically
Reliable opinion
Bashan 200 gear fits just right thanks to it is now faster store sends parts quickly, no problem with returns/complaints, recommend!
Review translated automatically
Reliable opinion
I have a zipp neken motorcycle it has 49cc it is from 2017. The new sprocket from gmoto fitted well it fit perfectly I am very happy with my purchase
Review translated automatically
Reliable opinion
Another part I ordered for installation on the EGL Motor quad. With knowledge of the construction, the installation of the new part is trivial. I highly recommend it!
Review translated automatically
Reliable opinion
Defender 250 of 2020, the product was very well made, its installation went without any problems and it does its job 100%
Review translated automatically
Reliable opinion
Gear for quad BASHAN BS200AU-11 CVT after comparison looks the same as the original. It is bought as a spare and therefore unassembled.
Review translated automatically
Reliable opinion
The sprocket fits the 125cc quad very well, it is made of good quality materials and fits without any problems on the drive shaft.
Review translated automatically
Reliable opinion
Fits perfectly into a 2010 bashan 200 lasted I've done 900 km so far :D so for me it's the bomb for the money :D
Review translated automatically
Reliable opinion
It fits a loncin 250 (probably most bashan too). I'm happy with it because I was shocked by the quality/price issue
Review translated automatically
Reliable opinion