Forgot password
Order status
Free delivery from 150 euro
Motorcycle fuel system - parts
Romet Ogar 200
Browse by manufacturer
Products reviews
Good morning I wanted to share the quality,fit and aesthetics I have a 1977 jawa 50 mustang motorcycle The quality product is super better napweno than the stock one. Fit: there was no problem with the fit on the lux no play. Aesthetics: it is made better than many Chinese carburetors, no fuel escapes anywhere. There are no such things as shortcomings scratches etc it is made super I recommend buying this carburetor to anyone I am very satisfied with the product 10/10.
Review translated automatically
Reliable opinion
For jawa 50 mustang fits like the original very well made aesthetics is ideal now the jawa burns from a shot is very well sealed and does not leak manufacturer gives you everything you need in the kit so you do not have to be afraid that some old part will be needed fits perfectly to the engine do not need to rework anything very highly recommend for someone who has such an old motorcycle
Review translated automatically
Reliable opinion
Carburetor very decently made,easy to install,holds the dimensions of the original. The engine fired up immediately after installation,it was enough only to adjust the slow speed screw and drive. It is worth buying new gaskets for installation, of course. The included hose was flexible and of good quality, while the filter came of a different type - rectangular and not round. Installed in a Jawa 20 armored.
Review translated automatically
Reliable opinion
Greetings. WSK B1 from 1969 The faucet fits and I must say that it is made solidly and also looks quite well slightly imitates the style of bygone times. When you unscrew the cap the thread fits superbly to the tank. One thing that I modified is this longer tube I shortened because in my opinion it reaches too high. Regards and field. Krzysztof
Review translated automatically
Reliable opinion
Very well made solid product ready to put on it does not need to adjust it very well cooperates with the motorcycle after purchasing this gasser problems with the motorcycle ceased no leaks no candle flooding, riding has become pleasant and stress-free.
Review translated automatically
Reliable opinion
The purchased gasket does its job, fuel does not leak from under the float cover, although it is not matched to the original Jikov carburetor, the holes are fo rze matched but unfortunately the outer diameter is too large and does not look aesthetically pleasing.
Review translated automatically
Reliable opinion
Ogar 200 88' the kit fits very well , the set admittedly lacks a throttle for full reconditioning , but the problems with the carburetor are over . My carburetor now works like new and more importantly I no longer overflow from the float chamber.
Review translated automatically
Reliable opinion
To get it to go on the faucet well you need to heat as it is any fuel line, it fits as it has. Photo of my Romet Ogar 200 under restoration assembled on parts from Gmoto.pl :)
Review translated automatically
Reliable opinion
Hello. I own a 1973 mustang 50 jaw. I am doing a full restoration of this vehicle about 3 months. The parts purchased have greatly expedited the repair.
Review translated automatically
Reliable opinion
Jawa 50 vintage 1979 in the process of restoration. I recommend the product met my requirements. I think I will be satisfied with it.
Review translated automatically
Reliable opinion
Recommended product . Careful workmanship at a low price does not differ from the original. I recommend
Review translated automatically
Reliable opinion
Mz etz 250 material good and workmanship Great nice appearance, workmanship aesthetic. I recommend!!!
Review translated automatically
Reliable opinion
I bought a carburetor for ogar 205,at first glance it looked ok, after using a hand pump it fired up. On the revolutions screwed very nicely, but after a while died. Holding it at high speed it runs, at slow speed it does not want and no adjustment does not help. I've adjusted the fuel level with the float so many times I can't count, I even plugged the air filter from a jawa 50 and halved the air intake, for a while it runs at idle but has no power to go. This carburetor is a disaster, money thrown down the drain, I only got frustrated and annoyed, I should add that I have the engine overhauled and the original carburetor runs very nicely, the compression I have is 8 bar, I do not recommend, unless I am the only one who got such a specimen
Review translated automatically
Reliable opinion
All parts fit the Jawa 23 Mustang . . . the tensioning strap for the air filter holder is a little too wide, so that it is quite "tight" with the float housing of the carburetor . . . so I had to replace it with a narrower version. Note the correct carburetor setting according to the smaller air filter . . . must be tested while riding. This air filter probably has more visual appeal than it really works better than the original part under the tank.
Review translated automatically
Reliable opinion
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
Reliable opinion
Finally a new faucet and the problem with leaking fuel disappears. Super quality. Additional filter and fuel line allow for a comprehensive overhaul of the "bus" that feeds the fuel system. Every part purchased from this store impresses with the quality of workmanship, nothing smacks of cheapness. Everything looks decent and solid. Thanks to the relatively optimal prices, you can even resuscitate the old Komar at a low cost.
Review translated automatically
Reliable opinion
Hello everyone I own a 50cc motorcycle I recently had a major overhaul of the engine and fuel system. On the gmoto website ordered a fuel faucet along with a filter and hose. The whole kit is very well described and fits perfectly to this model of motorynka. In good conscience I recommend this product, I am very satisfied with it.
Review translated automatically
Reliable opinion
With a diameter of 6 mm and a length of 50 cm, the fuel line is a solidly manufactured component that ensures reliable fuel flow. Its flexibility makes it easy to install, and its fit with standard dimensions makes it a practical and universal solution. Thanks to it, you can be sure of the smooth operation of the fuel system, which positively affects the performance of the vehicle.
Review translated automatically
Reliable opinion
Very good kit, thanks to it I can finally ride without throttling at high revs and now it is possible to adjust the air-fuel mixture normally (jawa 50) . Good workmanship of the elements nozzles have the capacity of the originals and not those blocked . Throttle valve nicely matched float too by the way as well as the rest of the components .
Review translated automatically
Reliable opinion
For Ogara 205 you need to ream the holes from the mount. On this carburetor it smokes only on push - I tried all the settings of the adjustment screw and it works worse than on the original carburetor. The fuel filter is a superfluous bit of trivia-there's a filter with a separator in the faucet and a filter at the carburetor inlet. Perhaps the carburetor would work with better compression.
Review translated automatically
Reliable opinion
In Gmoto store you can find really a lot of parts for motorcycles.And the cost of goods is in very decent prices for every pocket.Product delivered the next day after ordering and parts compatible and matching to my wsk 125 1976. This is certainly not my last purchase in this store . I recommend!
Review translated automatically
Reliable opinion
Carefully made replacement, everything runs smoothly without jamming (float, throttle, etc.). All necessary components assembled in the kit. After installation, without much adjustment, the jawka fired up and runs poprana - it even has free revs which was problematic on the original carburetor.
Review translated automatically
Reliable opinion
The fuel filter was not necessary for me. It takes up a lot of space and significantly extends the fuel line, which in itself I feel is a little too soft. The quality of the faucet seems ok. I bought this product due to the fact that it was cheaper for me to buy a set than to buy the faucet and line separately.
Review translated automatically
Reliable opinion
Romet Kadet. Before installing the gasket, I recommend sanding the surface of the faucet knob to get rid of pitting, because whatever the gasket is, fuel will escape through the pitting. If someone does not have mechanical sense, I recommend buying a complete faucet, which is a few zlotys more expensive.
Review translated automatically
Reliable opinion
Nice,but the nozzles seem a bit small.I mounted them,but I haven't tested it yet.The drive cable seems too weak,because there is a bigger hole in the speedometer,it can be a bit knocked.Otherwise I am very impressed with the other goods.Everything was of good quality and I liked it very much
Review translated automatically
Reliable opinion
I own a moped romet ogar 200,engine capacity of 50cm,year of production 1986.I ordered the product from you in the store Gmoto.pl.I mounted it to the moped,it is the original product as I expected,it fulfilled the purpose,I mounted and works properly.I recommend and Greetings.
Review translated automatically
Reliable opinion
Thanks to this gas tank moped will be faster and better engine, it has a suction which is helpful when the moped is standing for a long time without firing, less fuel, more power, can be transferred to many other motorcycles, better response to the gas and pleasant to the ear sound of the engine
Review translated automatically
Reliable opinion
Metal fuel faucet is a solid and durable product that ensures reliability during refueling. Its metal construction guarantees resistance to mechanical damage and weather conditions. In addition, the aesthetic appearance can add style and elegance to the vehicle.
Review translated automatically
Reliable opinion
Jawka 50 23 sport mustang I would recommend this carburetor to anyone.For this money I expected mediocre parts, however, I was wrong.The moped after engine overhaul runs very well, there were no problems with adjustment, etc.The plug as well as the fuel system are very good and fit.
Review translated automatically
Reliable opinion
The previous cap was tired of life and was lying loosely in the tank, the new one fits coolly, goes in tightly but you do not have to jerk with it. I have nothing to complain about it, it performs its function and as new it looks elegant. You can confidently take. Romet Ogar 200
Review translated automatically
Reliable opinion
The supplier showed professionalism in the preparation and delivery of the shipment. The electronic notification system of the status of the order until delivery to the addressee made a very good impression. very fast delivery And that without a courier.
Review translated automatically
Reliable opinion
Faucet very good quality, which goes with the price. I am very satisfied with the ordered item, it fit perfectly, and the installation went without any problem. The faucet is made of high quality material, I have no reservations.
Review translated automatically
Reliable opinion
I own a romet ogar 200 moped, the purchased carburetor is of good quality, everything fits very well, so far there have been no problems with the carburetor, as much as possible I recommend this product. The quality/price ratio for a big plus :)
Review translated automatically
Reliable opinion
Well, I finally arrived ordered carburetor, shipment was fast and products are consistent with the description, and by the way they added a cool sticker I intend to renovate my cucumber, so I will certainly order more than once on GMOTO.PL I recommend
Review translated automatically
Reliable opinion
I purchased an o-ring for the faucet from an ogar 205. Unfortunately, it turned out that the o-ring is quite a bit too big and despite using force, I was not able to tighten the lower part of the faucet all the way. Fortunately, it is quite tight and nothing is leaking.
Review translated automatically
Reliable opinion
Hi I bought a repair kit for the carburetor pioneer without this super kit a lot of these carbs would go in the trash I am dealing with the commissioning of the pioneer and stadiums the kit fits both and among other things unbeatable price thanks to the goods is super
Review translated automatically
Reliable opinion
The filter has a very cool reusable solution. It can be taken apart and blown out, which is a big plus. After several such treatments, the filter continues to be tight, no fuel leaks from it. I highly recommend
Review translated automatically
Reliable opinion
Carburetor repair kit for Ogara 200 in general is ok, only the throttle not refined, because I had to deepen the throttle guide groove, because it was too shallow and the throttle would not go in . The rest of the details ok.
Review translated automatically
Reliable opinion
A good, solid guide ;)
Review translated automatically
Reliable opinion