Motorcycle parts

2021-01-17, 12:49

View original

Sebastian

I own a Yamaha TZR 50. the chain fits the TZRka, and is dedicated by the manufacturer. The only thing is that you have to take DID 420D 132 links. The chain is made of good materials. It doesn't wear out, it doesn't stretch as fast as the kits from bonyfish, The chain is on a clasp so the installation is very easy. The chain is black so that on the motorcycle the chain looks elegant, it does not stand out from other elements and therefore does not spoil the appearance of the motorcycle, in fact it improves it. The fastener is very intuitive and all you have to do is place the chain on the sprockets then fasten it with the fastener included with the chain. Even a person who is seeing a motorcycle for the first time will know how to fasten it. The chain is durable. I bought a motorcycle with this chain with which I rode 13 thousand. I do not know exactly how much the chain was at the time of purchase, but I know that the chain will quietly go through these 15 thousand so it is durable. The low price is another advantage of the chain because the chain is, as I mentioned above, of very good quality and I am sure that everyone will be satisfied. This is a non-ring chain, which also improves its service life. Compared to its predecessor, the older model, the standard of resistance and service life is much higher. Durable, designed for use in both serial and slightly tweaked vehicles with capacities up to 80cc. The only thing you need to watch out for with larger capacities is jerking the gas handle, because as we all know, the chain gets stronger when jerking the gas handle in larger capacities, which translates into wear of the above-mentioned chain, and as we all know DID 420D 132 links is usually designed for smaller capacities of about 80cc. It is packaged in a good nicer package than the previous version, which includes instructions for putting on the chain so without any problem even an inexperienced person will manage to put on this chain. I think the chain is perfect for the price I RECOMMEND.

Review translated automatically

Reliable opinion

2019-03-19, 10:29

View original

Krzysztof

The drivetrain kit was purchased for a 2004 Honda Varadero 125 motorcycle with the idea of installing it on the bike myself, hence the purchase of a chain with a clip fastener rather than a cap. At first I had concerns about whether I would be up to the task and mount the drive properly. Upon receiving the shipment, I familiarized myself with the contents. To my surprise, the packaging contained the necessary information on proper installation and adjustment in Polish. The contents of the package were two sprockets and a chain, which at first glance looked very decent (Japanese precision) in addition, the chain was already covered with grease. The new parts fit perfectly into the factory holes, which meant that the whole assembly took me only 30 minutes. After installation, I started to adjust the chain, which I had previously fastened with ordinary pliers without any problem. After mounting and adjusting the whole thing, my drive looked really very decent and aesthetically pleasing. Next, a test ride and here without surprise. Considering the precision and quality of the parts, it performed sensationally. In conclusion, I recommend this kit for its very affordable price , quality workmanship, aesthetics and, above all, ease of installation and adjustment.

Review translated automatically

Reliable opinion

2024-06-10, 14:27

View original

Maciek

Pros: + appearance, a subjective matter, but the gmole in person on the motorcycle looks even better than in the photos, in my opinion - great, they definitely add character (they do not stand out excessively from the skull/engine, they do not look on the sneaker like a learning cage or a laundry dryer), the plate is a piece of decent sheet metal, which not only looks good, but completes the racy look; + price; + Polish product, always nice to support your own; + quality of workmanship, both the welds look solid but aesthetically pleasing, as well as the painting itself - no shortcomings or other baboos; + supposedly indestructible, they are not afraid of any soil ;) (I did not have the opportunity to test, and let it stay that way, but from the opinions of other moto travelers, including Moto Hero and Borek`s Adventure, whose reviews encouraged me to buy, it seems that they will endure a lot); To improve: - The instruction manual - lacks information on the order in which to assemble the various components when buying a full kit (when assembling a full kit - I recommend starting the assembly with the plate and lower gmols, the upper ones only later, and the whole thing should be screwed together only at the very end), and lacks information on what torque to tighten the gmols/plate; Would I buy again? Definitely YES

Review translated automatically

Reliable opinion

2020-09-07, 08:47

View original

Krystian

Hello I own a junak 901 with a capacity of 50/70cmm from new purchased in 2011 to date Junak has traveled nearly 17 thousand km What I really like about the moped is the simplicity of the whole motorcycle, there is nothing complicated in the repair process, simple design, availability of parts is huge and easy to obtain. This is the second repair of the engine since new due to the fact that I ride a lot, parts wear out, now I have overhauled the engine again and the motor fires up from a shot, the larger gear ratio gears allowed to run longer in gear and achieve better results speed in km ends as soon as the pointer passes 80 I like to test various products with them especially carburetors and filters to get better results in combustion and on power of course it is possible but several carburetors of different manufacturers of fuel nozzles you need to have to get such an effect . Parts from gmoto I buy because it is a proven seller of parts and really parts are of very good quality than on other sites only now what I bought starter chain sliders significantly differ from the original I would say more that the quality and material are other weaker but for everything there is a way site I recommend to all lovers of unicycles

Review translated automatically

Reliable opinion

2024-11-02, 13:15

View original

Wojciech

I applied the fender to my Suzuki Drz400E and am very satisfied. The product itself is of high quality and comes with a set of mounting screws. Connecting the wires requires changing the cube,but they are described and the installation and connection itself does not require great skills or specialized tools. A very cool solution for those who want to keep the classic lighting with an incandescent bulb. The big pluses are: integrated license plate illumination, high rigidity of the whole fender, and built-in gutter that protects the wires from mud and stones. Another advantage is the shape of the sides of the fender, which, after drilling holes, allows you to mount additional turn signals. The downside may be the problematic replacement of the bulb when you choose the aesthetic form of mounting by hiding the lamp under the original fender because the screws of the diffuser are located on top of the lamp. (You can, of course, mount the fender in a way that allows you to quickly replace the burned out bulb). In good conscience, I recommend this universal product, and I believe that it is made and looks much better than other universal fenders available on the market.

Review translated automatically

Reliable opinion

2018-02-19, 10:14

View original

marex19701

Hi. I purchased a UFO street tuning fairing from Gmoto.pl online store and mounted it, but not on a motorcycle or quad - I mounted it on my bike, just like the previously purchased fenders and I will say that the bike with this equipment looks sensational in my opinion. However, thanks to the headlights installed in the fairing, the road when riding at dusk or at night I have so illuminated as never before. The fenders perform their function sensationally, especially the rear one - it protects from the mud not only my back, but also the expensive damper I have installed. Before I had a fender, which protected only my back and not always, and the damper after each ride in the wet, or in the mud, I had to clean - now I no longer have to do so. When I ride through the city, I arouse general admiration - everyone looks at me and I can only hear comments such as "but a bike, but the graze" I attach photos - before tuning and after tuning, so that you can judge for yourself. Best regards and I encourage you to shop at Gmoto.pl :-)

Review translated automatically

Reliable opinion

2020-11-23, 20:56

View original

Mikołaj

Since I started using Suzuki GS 125 ES 1998 year I was very satisfied but when I started to have problems with the clutch including slipping pulling jerking. I decided to put the motorcycle away because due to the fact that I did not have money for it because there were other expenses I did not want to "cat" it and destroy it even more. And about 2 months ago I thought to do it in the end and so after disassembling the clutch it turned out that the discs are in terrible condition the clutch linings were already gone. The discs were discolored, but I decided to leave them because I did not want to push myself into unnecessary costs. I bought new discs for about 40zł did not drive even a month. In the end, desperate with the desire to ride my bike I bought a complete set from Gmoto.pl new EBC discs, Lucas metal spacers and EBC springs since I have established this set I am more than satisfied with everything there is no comparison to what was. I recommend these spacers really decently made and worth the price.

Review translated automatically

Reliable opinion

2017-09-05, 09:20

View original

Prentki-BLOG.pl

I'm working on restoring a Java 50 Mustang, which has been in the hands of my uncle since new - it has spent the last 20 years in the basement under a thick layer of dust, so I need a whole bunch of different kinds of performance parts - one of the first ones I ordered are these clutch discs. And now yes, first of all - I didn't expect that parts for such an invention are so easily available and cheap. Secondly, I was pleasantly surprised that the discs at such a price are of such nice quality. This one doesn't really differ from the factory disc I took out of the engine. After assembling and starting the engine, the clutch performs flawlessly - it clutches nicely, no problems with adjustment. We'll see how it will be with the life of the discs, but I suspect there will be no problems here either. I definitely recommend - shipping shipped within an hour of placing the order on allegro, packaging for a six plus, the package arrived the next day. Everything is fully consistent with the description.

Review translated automatically

Reliable opinion

2021-06-19, 09:08

View original

Marcin

Triumph Speed Triple 2009 - I recommend this winding, stator, it looks exactly like the picture. You do not need to redesign anything, everything is plug&play. Due to the fact that the stator in my motorcycle has a very hard life and is regularly "stoned", I decided on Electrosport and hope that I will not have to return to the topic of winding replacement for another 6-8 years. Gmoto was one of the few stores that had windings available for my model practically on the spot. Shipping they embraced overnight, also turbo recommend. If someone is thinking about Chinese substitutes of unknown origin, or rewinding an old winding, I can only say that sooner or later the curse of a burnt coil will get you again, so it is better to deal with the subject once and for all with a brand-name part. Well, unless someone likes to "play" at the motorcycle, and not on it :)

Review translated automatically

Reliable opinion

2019-10-15, 09:09

View original

Marcin

The upgrade was mounted to a 2006 Suzuki GSF 1200 S Bandit motorcycle, and there was no need to rework (buy longer) the accelerator handle cables or the brake and clutch lines. The handlebars and the accessories attached to them do not "bump" against either the tank or the fairing. The position is more upright and makes it easier to maneuver at low speeds. The mount is made of aluminum just like the original handlebar mounts (risers), the quality does not deviate from the original, but it is slightly wider than the original handlebar mounts and the high-gloss finish did not blend in perfectly with this motorcycle, it is a universal mount so it is acceptable. The hole is slightly smaller than the handlebars, but this allows you to "scoop" the handlebars and increases the stability of their attachment. I recommend the product.

Review translated automatically

Reliable opinion

2021-10-23, 19:17

View original

Krzysztof

Honda CBF 1000 2014. - They say "Honda doesn't look here". Unfortunately, at 28000km the water pump started to leak. I dismantled the old one and after taking it apart, it turned out that not only the sealer but also the drive shaft was badly worn. As for the sealer after looking very closely, it was the sealer that caused the drive shaft to wear out. In my opinion, poorly assembled pump at the assembly stage. I would also add that taking apart the pump borders on a miracle. Three days I approached the subject, the screw holding the rotor has a "left thread" and is screwed on the glue, also be careful because you can screw up the pump. One more thing, take care of the coolant, change every 10-15 thousand/km and do not add water under any circumstances. As for the new pump, it looks like the original, so far it works. It fit perfectly, no complications during installation. In the photo, the new pump.

Review translated automatically

Reliable opinion

2024-09-24, 07:21

View original

Robert

I purchased the DiD chain disappointed with the factory chain installed by Husqvarna in svartpilen 401, which at 13 thousand mileage stopped despite regular lubrication. I recommend counting the links in the "old" one before buying it, because in my case the catalogs state 118 and it is 112. The DiD chain is really well made, and comes with everything you will need even lubricant for the connecting link. I replaced the set with sprockets, of course. With a mileage of 1 thousand about the durability I can not talk about, in any case it does not require tension adjustment so far. In the motorcycle, the strange vibration and uneven operation of the drive caused, I think, by uneven stretching of the original. Delivery of the order was prompt, I received telephone assistance with the selection of gears without any problems. I can recommend the store.

Review translated automatically

Reliable opinion

2018-11-01, 20:15

View original

Krzysztof

I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.

Review translated automatically

Reliable opinion

2020-09-08, 21:04

View original

Kamil

The purchased YTZ6V battery for a 2016 Honda CBR125R JC50 motorcycle turned a barely panting pet at start-up into a purring stallion releasing its roar immediately after pressing the starter! As you can see from the attached photos, the battery, along with the fluid and mounting components, was packed in a small cardboard box, and the included instructions ensured that the battery was smoothly and properly prepared for first use. An important point is that according to the instructions, the battery after flooding should be fully charged before use, so those considering purchase must bear in mind that it will be necessary to have a rectifier (charger). The YTZ6V battery is an original / factory battery for the CBR 125R JC50 motorcycle.

Review translated automatically

Reliable opinion

2020-10-16, 11:11

View original

Marek

This is my next RK chain from the XSO series. In my opinion it is an excellent product for its price ! Used on a xt660R motorcycle, with adventure riding on/off road (40/60 %) it safely withstands really high mileage, without excessive care (I adhere to the school that the chain cleans itself best so I only take care that it is not overly dry). Definitely do not be afraid to use this chain in harsh off-road conditions, the seal is very effective and durable. The quality of Takasago steel means that for the first 70% of use we can forget about stretching the chain. The lubricated drive runs quietly and smoothly. Compared to other competition counterparts DID, JT, Regina that I have used RK is number 1.

Review translated automatically

Reliable opinion

2020-06-30, 10:00

View original

Jacek

The module, unfortunately, after being hooked up with a NEW spark igniter and a NEW bottle coil, after a few minutes of idling burned up stopping giving spark. (Near the pulser pin was warm) Just to add that 2 other modules (photo) also suffered the same failure and much faster. Personally, I recommend a replacement in the form of a module from Chinese scooters (also shown in the photo), unfortunately it requires an ignition delay of about 0.5-1mm relative to the factory marks. (I recommend using the appropriate tools to adjust the ignition) As for the housing and connectors, they seem to be solid and of good quality. Unfortunately, the interior in MY copy was not good enough. But still better than in two other models.

Review translated automatically

Reliable opinion

2024-07-21, 18:33

View original

Zbigniew

High quality product. Precisely made. Each element marked with a laser description of the manufacturer. On the manufacturer's website there are certificates allowing the item to be used. The package includes a short instruction manual (unfortunately, there is no Polish description), but the steps to be performed are simple enough that anyone should be able to cope with it. The manufacturer warns that after replacing these elements it may be necessary to shorten the side feet - this is what happened in my case on a 2017 Honda x-adv. The expected effect - lowering the motorcycle - was achieved. During the test ride (about 100 kilometers), I do not feel the effect of changing the suspension elements on the comfort and safety of the ride.

Review translated automatically

Reliable opinion

2020-06-13, 10:45

View original

tomasz

Hello! Some time ago I bought NGK BR9ECMIX spark plug and I would like to share my opinion with you. It is really great! I immediately noticed an improvement in the performance of my motorcycle: a little more power, lower combustion. I have already ridden 10 motoring hours on it and see no problems. It works the same as it did at the beginning, i.e. the motorcycle burns from a kick cold or warm, I have no problems with firing up. The improvement is huge compared to my old plug, where I had numerous problems with, for example, firing. It kept flooding the plug, so I decided to get an NGK iridium plug and all the problems disappeared. I can confidently recommend this product to anyone. Simply a revelation! Greetings

Review translated automatically

Reliable opinion

2021-05-18, 11:01

View original

Marcin

Hello. alternator winding, staror ELEKTROSPORT as close as possible to the original, quality of workmanship 5+, attention to detail, accuracy of production and professionalism are visible to the naked eye, the goods beautifully packaged, in a beautiful white sliding cardboard box, until nice to the eye, a big plus for the manufacturer. After replacing this component in my motorcycle, the spark is really strong, firing, well visible, and most importantly the motorcycle has noticeably much more power, it works better from slow revs, with which it had a problem, certainly the top speed has increased, and the operation of the entire engine has improved, I am 100 percent satisfied, with my hand on my heart I recommend.

Review translated automatically

Reliable opinion

2022-03-18, 07:01

View original

Błażej

Hello everyone, I just purchased this iridium spark plug for my 125 motorcycle, Yamaha Mt. I am satisfied with this candle because the original iridium does not come out and it makes a big difference in the ride and engine performance. The quality of NGK candle seems to me that it is really very good, the effects are visible immediately after fitting and the first firing on the new candle :) The engine runs evenly, without interruption, and you can feel the difference that it is more "aggressive" when starting. Certainly I will recommend to everyone to buy this candle, because for an earlier motorcycle I also bought such a candle and I am satisfied! Greetings

Review translated automatically

Reliable opinion

2018-11-12, 15:59

View original

Krzysztof

Honda Africa Twin XRV 750 1999. The piston fits the calipers on older models, the pistons for my motorcycle are 3mm shorter. I ordered the set with the idea of shortening it. The material turned out to be soft compared to the original(this does not prove its strength, therefore the rating of 3 from the quality), cutting 3mm on the lathe did not overheat the pad and after protecting it on the turning side with an appropriate specific will ensure that it will not lose its anti-corrosion properties. A perfect replacement for the twice more expensive original. The width agrees, the quality of the seals seems to be OK, after installation it does its job - I recommend.

Review translated automatically

Reliable opinion

2024-10-08, 09:30

View original

Mirica

Suruburile sunt bune si ma bucur ca am gasit Gmoto pentru astfel de piese de schimb pe care, in general, sunt greu de gasit. Este mult mai bun ca originalul. Totusi, atunci cand le am comandat prima oara, am comandat 2 bucati de acelasi surub. In schimb, am primit doua suruburi diferite, unul a trebuit largit. Acum, la aceasta comanda ( a doua ), am primit la fel, un surub asa, altul asa. Am atasat o imagine cu suruburile sa vedeti diferenta dintre ele. Nu e nimic, il pot largi pe celalalt. Daca comandati o singura bucata, va veni doar cel potrivit. Recomand indiferent, sunt din material foarte bun si sunt foarte utile.

Review translated automatically

Reliable opinion

2024-09-11, 17:41

View original

Piotr

The frame keeps the original dimensions and angles. Made " as for myself", that is, solid welds and slightly thicker tube walls than in romet's+ additional reinforcement and control arm bearing. Coated with some kind of primer whose paint does not weigh. The only big downside is a crookedly welded steering stop, not quite asymmetrically, and so close to the headstock that it is impossible to pry the raceway. The situation is saved by the thick sheet metal and a strong weld, I managed to bend it with a hammer, and the asymmetry was 'leveled' with a grinder. Overall, the frame was made better than the Bydgoszcz original, by someone who knows his stuff. With minor adjustments, it should last for years.

Review translated automatically

Reliable opinion

2022-07-23, 09:43

View original

Joanna

I own a 2012 Romet CRS 125 wanting to increase its power a bit more I thought of this particular engine. I purchased and am mega satisfied. At the very beginning the engine looks very well made, during installation there were no problems, the engine fits in the frame plug and play. The whole procedure of translation including dismantling the old one until firing up the new one took about 1 hour. The investment was worth it, as the motorcycle got a new life. The engine fires from a shot, runs evenly, gears enter gently and most important . power compared to the 125 is 2x more I recommend to anyone who wonders "whether it is worth" such a procedure

Review translated automatically

Reliable opinion

2022-08-16, 13:43

View original

Mateusz

Tensioner is working very good quality workmanship everything fits nicely zero backlash I've been using for several months and nothing happens really good material even from hitting a stone or some tree while driving nothing bends or breaks my old tensioner after a few faster rides in the woods and hit a fallen tree broke.Thread on the tensioner is aesthetically done screw nicely into the thread.As you screw in the screw and tighten the chain, the screw holds without loosening or something like that when you tighten the chain this tensioner will hold a few good months I highly recommend

Review translated automatically

Reliable opinion

2021-05-05, 19:36

View original

Wojciech

These hoses from HEL, they deliver. It's impossible to boil them (I'm writing this after tracked), they look great, the fit is perfect, and the lifetime warranty speaks of the manufacturer's confidence in the quality of its product. The color scheme of the cables and brackets can be freely chosen. In my black moto, the cables, in addition to their practical use, have become a cool, red, stylistic addition. Their appearance adds a sporty touch, and their efficiency, together with the replaced master cylinder (for a stronger one), new discs and pads, gives braking as fast as on the hedgehog's spikes. I am very happy with the fact that I ordered them.

Review translated automatically

Reliable opinion

2017-08-19, 11:15

View original

Kazimierz

I put a 110 engine into a 2013 Barton Fighter 50 eco. The engine started and runs well.Not matching are :front sprocket(the 14-tooth one seems to have a different pitch because the chain jumps) , gear shift lever,foot starter and sprocket cover ( you have to cut it to fit ) . You also need to replace the air filter in addition. Another thing you need to get used to is the gear layout - neutral at the highest and the other gears down ( N-1-2-3-4) .You also need to put an additional line to the suction because in the previous carburetor there was a lever control directly on the carburetor.And besides, there is power :) . Greetings.

Review translated automatically

Reliable opinion

2024-12-12, 17:05

View original

Simon

Mindenkinek ajánlani tudom csak a Gmoto.hu oldalt teljes felelősèg illetve korrekt cég ! Az általam rendelt hangtompító teljesen tökéletes sérülés mentes ! Valódi Pró circuit R304 típusú dob ! Könnyű rendelés gyors szállítás és megfelelő termék! Csak ajánlani tudom ! Rengeteg cég tanulhatna tőlük korrektséget ! Köszönöm szépen még egyszer a magam nevében! Az általam értékelhető Gmoto.hu ⭐️⭐️⭐️⭐️⭐️ csillagot érdemel ! Rengeteg vevőnek , ismerősnek , barátnak . Motoros társnak ajánlottalak titeket ! Köszönöm szépen mégegyszer üdvözlettel ByFor : Simon Daniel Hungaria ! ???

Review translated automatically

Reliable opinion

2024-10-02, 14:28

View original

François

La livraison en France fut rapide, pour ce produit qui vient de loin. Le moteur est bien protégé dans du polystyrène. La qualité de la peinture noire me saute aux yeux dès l'ouverture du colis. Après un rapide examen, les finitions sont qualitatives et l'ensemble est conforme aux images du site. Pour ce moteur que je vais monter sur un DAX 50, j'aurais aimé une documentation minimale pour le câblage électrique et un peu plus d'information techniques sur le site. A ce stade, je suis très satisfait de mon achat et de son rapport qualité prix. Il me reste toutefois à le mettre en route!

Review translated automatically

Reliable opinion

2024-05-06, 12:06

View original

Krzysztof

Reinforcement very solid. I installed in a KTM EXC-350.Previously I rode without and unfortunately the radiator on both sides bent during falls. Installation was no problem, especially since I had to replace the radiator with a new one anyway. Here a note - I bought a replacement "Psychic" and it differs in the number of inputs from the OEM - the manufacturer assumes that we want to give up the thermostat right away and there is one less circuit - for me this was a plus. Going back to the "back" - in the right one there is a place to install a fan. I installed an aftermarket one and although the hole is a little smaller, it was possible to fit it in.

Review translated automatically

Reliable opinion

2024-09-25, 06:49

View original

Karol

It is not a perfect copy of the 3JD handle. The handle needs to be sanded, without it when you turn it presses the pump and the handle reaches the steering wheel and locks the brake. After grinding it is ok. The manufacturer regretted the material at the mounting screw where you can see the recess to cast the handle, a good chance that it is in this place(at the pump) that the handle will break off at the soil, where the originals often break off only at the very end and you can still use the brake for the rest of the ride. The original also has this indentation but it is much smaller. All in all, the product is made on average, I rate it 5/10.

Review translated automatically

Reliable opinion

2020-11-09, 11:07

View original

Vicia

Junak M10. Visually the screws look nice. fit and with installation there was no problem screwed in. Without a problem. But the head of the screw, when fully tightened, does not reach the attachment at the handlebars to the handle. The play remains. It looks as if the underthreading behind the thread is a deco too long. The handle also flies as it wants, you know It is necessary to lean a little on the subject and improve something there. Unfortunately I do not have the org. screws to compare. It is known that this is a Junak and everything needs to fit together individually. As for the performance of the product I have no reservations.

Review translated automatically

Reliable opinion

2024-11-15, 17:56

View original

Esad

Das Artikelbild zeigt das Kettenblatt in schwarz. Leider habe ich kein schwarzes erhalten sondern lediglich ein silbernes. bin ich ein silbernes wollen würde dann würde ich auch ein silbernes bestellen. Warum wird hier ein schwarzes Kettenblatt abgebildet und es wird ein silbernes geliefert? Habe es dann so verbaut, da ich die Maschine nicht wochenlang so in der Garage stehen lassen wollte. Sieht aber nicht gut aus und gefällt mir gar nicht. Notlösung. Ich verstehe nicht warum man die Leute so in die Irre führt. Material ist okay, wirkt aber ein wenig billig.

Review translated automatically

Reliable opinion

2023-01-05, 17:35

View original

Szymon

Qualitatively a very good product, although unfortunately the black matte is more prone to scratching than the stock chrome, although I guess you just have to take that into account. I tried on a few handlebars and this one seems in my case the best compromise between price, looks, comfort and control. It's not too wide or too high, so it's not the typical American funny Ape Hanger, which for me is a huge plus. The only downside is that I had to peel off the paint under the rollgas - the manufacturer probably didn't anticipate the thickness of the paint in the diameter of the product.

Review translated automatically

Reliable opinion

2018-09-30, 13:23

View original

Patryk

For the last 3 years I have been riding on a RK chain and it was a good chain but after I bought DID I decided that instead of changing the chain on my Derbi every year for a RK chain you can do it differently and in my humble opinion everyone who is a bit of a biker should ride on this chain because it is a pleasure, It does not make any noise, its appearance is not astonishing, but what do you expect from a chain - appearance or functionality - I already know, I recommend to buy this chain and see for yourself what I am talking about.

Review translated automatically

Reliable opinion

2024-10-06, 19:40

View original

Maciej

The rating will not be objective (none is ;) because I am a fan of the YAKK brand (my Trampek already has a plate, gmole, center foot and radiator guard just). The quality of the cover - like the rest - great. Very aesthetically pleasing workmanship, no mistakes, shortcomings, well painted and perfectly matched to the radiator, nothing knocks, nothing knocks :). Installation trivially easy (two screws). Finally, I can sleep peacefully without worrying about the safety of the radiator. And one more thing - the product came very well packaged, which also deserves praise.

Review translated automatically

Reliable opinion

2020-07-07, 12:11

View original

Przemysław

For my motorcycle I can not get parts anywhere except GMOTO store. This is a perfect store .The cable fits 100% to the motorcycle.The cable costs pennies and it is made solidly and beautifully packaged and wytzrymal. Shipped the same day. It is not only this item because GMOTO I recommend to EVERYONE because their items are aesthetically made and are durable. The price to the quality of this cord is even too small. What more to want? Not only is the rope in this store ( because I couldn't get it anywhere else), it's durable and really made the way it needs to be.

Review translated automatically

Reliable opinion

2019-12-16, 10:26

View original

Tadeusz

The products I bought from you are ok. But one of them, that is a pipe with a cable dedicated to junak m10 should be improved the quality of the cable poor, it is too short it should have an extra few centimeters (in the description should be the length and type of cable - in your photo it looks better). In fact, I have to buy another one. Low price does not oblige to sell lousy stuff . Other products ok, service very nice. I will buy but with more caution. The photo shows the mounted cable if it was longer could be accepted.

Review translated automatically

Reliable opinion

2020-06-13, 20:10

View original

Paweł

I needed a link on short notice, my previous one did not want to work with me, a quick decision and I knew where to order from. So let me start with the downside: - different than in the picture Now the pluses: -different than in the photo -solidly made, it feels thick -caps in the shape of a nut so you can screw more firmly and easily -Polish product - it is necessary to support our economy during the pandemic -good price -satisfaction with use The greyhound rides until nice, and it is much better to ride seeing its speed ;)

Review translated automatically

Reliable opinion

2021-10-02, 07:30

View original

Paweł

I own a classic such as Yamaha fzr 1000, and Suzuki rf600r both of these motorcycles I polish as much as I can, this time I bought a vaccuometer, I bought the Yamaha in such a state that it did not start, after 2 days of work on the carburetors, it was time to synchronize, I thought the vaccuometer would not reach me on the 3rd day, but nevertheless it arrived. We put the Yamaha on its feet, it works. I packed both girls on the bus and the three of us spent the weekend at the track. Thank you all gmoto for your solid cooperation and the good products you offer

Review translated automatically

Reliable opinion

2020-05-12, 13:07

View original

Dariusz

Hello, I purchased a DID product for Mrf 140 RC I ordered 114 links I had to shorten 6 links in my opinion it was difficult to break but after a few rides of 2-3 I was slightly disappointed because the chain wore out, that is, the gold color peeled off and the usual gray showed up, so far I do not know how to stretch it, but after these rides it did not stretch out too much so what's good about + -GOOD WORKMANSHIP -LIKEABLE - SOLID what's in the - - HE STRETCHED A LITTLE, BUT I THINK IT WILL STABILIZE - THE GOLD COLOR CAME OFF A BIT

Review translated automatically

Reliable opinion

2021-01-11, 09:50

View original

Sławomir

Good morning, I own a 1987 Suzuki Dr 600 motorcycle. The motorcycle was bought back from a friend for the proverbial few pennies after 14 years of stasis. Many parts needed to be replaced due to poor technical as well as visual condition. Currently in the process of resuscitation is the rear suspension, for which a set of new bearings was just necessary. It is important to make sure before buying that the part is dedicated to your motorcycle and is of good quality. This has an impact on safety and long use.

Review translated automatically

Reliable opinion

2024-11-12, 23:01

View original

Eryk

Tłok bardzo dobrze się sprawuje przez już ponad 10 tysięcy kilometrów bardzo wytrzymały nie ma z nim problemów. Przez szeroką gamę dostępnych nominałów tłoku bardzo łatwo znaleźć pasujący do siebie. Jeden z najbardziej wytrzymałych tłoków jak i pierścieni dostępnych do tego typu pojazdów, godnie mogę polecić i przy najbliższej potrzebie z pewnością zdecyduje się na ten sam tłok Jedynym minusem może być dziwny metaliczny odgłos ale to norma w tych tłokach często więc nie ma się czym przejmować

Review translated automatically

Reliable opinion

2019-08-06, 22:57

View original

Adam

WSK 125 1985.The whole kit after mounting works well, although you have to get used to the "ringing" of the aluminum cylidr. The shaft is heavier than the original, the cylinder is made quite accurately (windows according to the original). The piston could be made more aesthetically pleasing, but the "dimensions" preserved. The carburetor is a revelation for today's production - it holds the revs nicely and cranks the engine smoothly. Its only shortcoming is the needle badly cut grooves for the safety - see photo. This needs to be changed. I recommend.

Review translated automatically

Reliable opinion

2021-11-21, 15:32

View original

Tadeusz

Great drive chain. Installation was instant and hassle-free. I generally don't pay attention to such things, but this gold color has its own charm after installing the product on the motorcycle. The equipment immediately looks more rich, thus inspiring respect in the neighborhood ;) And seriously, the chain looks very good and, in my opinion, increases the aesthetic value of the vehicle. I opted for the reinforced version (HD) and hope that this will translate into longer use.

Review translated automatically

Reliable opinion

2022-08-16, 13:44

View original

Mateusz

I bought this gasket because I was fed up with leaking fuel from the gasser which was going to waste on the engine.Thanks to this gasket your combustion will decrease because you will have no loss in fuel.It is made of rubber which fits perfectly into uneven surfaces.Good quality of workmanship when tightening the rubber does not break but adapts to the surface and seals it.Holes for nozzles and float are precisely cut I recommend a very good product

Review translated automatically

Reliable opinion

2020-04-07, 11:54

View original

Jakub

Yamaha yzf r125 2011. ATHENA brand front shock absorber oil seals are relatively cheaper than competing ARI brand seals, but they perform just as well as the more expensive ones. After consulting with users of these sealers, I found out that you can do a good few tens of thousands of kilometers on them without any leaks, which made me decide to buy them. The product is made very carefully and is a perfect fit. I highly recommend :)

Review translated automatically

Reliable opinion

2022-06-05, 21:54

View original

Maciej

I acquired my Yamaha SR125 for a total overhaul - seriously, I disassembled the entire motorcycle to the smallest components. One day it was time to replace the chain, and as you know, you can't replace one component but the whole set (chain + sprockets) is required. I was very positively surprised by the reproduction of the original by the de facto Japanese company DID. The product both in appearance and quality matches the original from the first assembly. I recommend with my hand on my heart!

Review translated automatically

Reliable opinion

2020-07-07, 21:45

View original

Grzegorz

The piston "flows" through the cylinder, the markings on the piston very clear ,super quality(ALMOT). The head fits well with the cylinder, the piston pin no play. Cylinder and head gaskets made of krygelite, but the head gasket could have a copper ring and not a steel plate.Pivot locking devices could be made of seger rings, and not of shaped,hardened wire. However, the above kit is very much an investment in the reativation of the Dezamet 023 engine.

Review translated automatically

Reliable opinion

2020-10-13, 09:16

View original

Krzysztof

Hello cordially. Acctually this battery was connected to the installation of a 1969 WSK B1 motorcycle.I have previously applied this battery model to 1975 WSK Garbuska motorcycles. 1966 SHL M11. 1967 SHL M11W. As well as to a 1963 and '65 Junak M10. These batteries winterize in the garage, connected to their machines and nothing happens to them - after a long stop, of course, it is worth charging them a little and nothing else I have to do to them. I recommend and greetings

Review translated automatically

Reliable opinion

2024-10-05, 04:53

View original

Pr. Tamás

Eredeti erőátviteli lánc már nem kapható újonnan, nagyon sok helyen kerestem, ezért veszélyben forgott egy szép állapotú 1981-es Yamaha XJ650 Midnight Maxim motorkerékpár felújítása. Ekkor találtam meg a TOURMAX PCM-203 láncot a kompatibilitási táblázatban. Jól kidolgozott, Japán gyártmány, látszik rajta a minőség. Már meg is érkezett, aminek nagyon örülök. (Beépítve csak később lesz, szerelő által). Ajánlom ezt a terméket minősége és ár/érték aránya miatt.

Review translated automatically

Reliable opinion

2020-04-27, 13:33

View original

Bartosz

Honda cr 125 year 1995 vertex piston workmanship is really solid. After intending the cylinder and selecting the right piston, it is very well fitted. It was very quick and easy to install this product and of course it meets the requirements it is intended for. The compression in the cylinder now is as it should be and there is no lack of power. Vertex pistons, as for me, are one of the best on the market. Surely the next one will be from this company.

Review translated automatically

Reliable opinion

2021-02-27, 12:30

View original

Jacek

The kit fits the cylinder of the 1987 Yamaha YZ80 2JF engine without any problems. (85-87r) This is a Wossner kit that I highly recommend, one of the best brands producing pistons. I have mounted to many 2T motorcycles, they have never failed. With this kit, I recommend being careful with the installation of the pin protectors. They go in deep and you need a lot of patience when installing them, as they spring hard. When pushing them in, it is best to help with the old pin.

Review translated automatically

Reliable opinion

2021-09-04, 13:04

View original

bartosz

Cable well made without defects fits my motorcycle yamaha YZ 250 F 2009r on aluminum frame cable works very well clutch handle goes softer than on the original I assess the product after 2 months of intensive use on gravel pits and forests where there is a lot of sand and dust cable always works the same lightly no problems with installation with a pure heart I can recommend the product to professional and amateur motorcyclist.

Review translated automatically

Reliable opinion

2018-11-01, 20:28

View original

Krzysztof

Honda Africa XRV 750 - 1999. I bought 12 pieces. This mounting rubber is found in several places on the motorcycle(the mount of the skull rack, oil cooler, plastic handles, etc.). It looks like the original, the rubber is flexible, you can bend it with two fingers with a stronger squeeze and it looks solid. Only the course of time can verify whether it is as solid. Dimensions: Hole diameter(nominal): 10mm Width of the entire rubber: 22mm Groove depth: 8mm

Review translated automatically

Reliable opinion

2024-12-30, 22:32

View original

Kacper

Witam posiadam Suzuki rm 125 z1985 roku jest to już bardzo stary klasyk który ma swoją duszę i prowadzi się całkiem inaczej jak współczesne crossowki zakupiłem na G moto zestaw naprawczy pompy wody gdzie tylko tutaj go znalazłem nigdzie indziej nie był dostępny ponieważ do takiego typu motocykla części w Polsce są mało powrzechne i trzeba sprawdzać ja zza granicy zestaw pasował bez najmniejszego kłopotu oraz spełniał swoją funkcję polecam Kacper

Review translated automatically

Reliable opinion

2018-10-14, 20:42

View original

Krystyna

The son owns a KXD 125 cross and the installation went smoothly without any problems. They were put on first from the side of the handlebars, as it was the faster and easier way, and only later from the handles. The handbars look good and serve their purpose perfectly. During a fall they protect the hands well from abrasions. They are made of fairly strong plastic resistant to cracking. The son is very satisfied. Well, and his motorcycle gained in appearance :)

Review translated automatically

Reliable opinion

2018-08-02, 03:02

View original

Adam

Handle made of bdb material. Chrome durable - I already have 3 of these and they give good service. Again, however, a mistake in workmanship relative to the original. It should have one end with thread, the other a bare rod - as in the photo. I'll add right away , that this is only "cosmetic" and does not affect the installation and has its plus - it "holds" better. Fastening spacing 120 should be measured and made all the way to the fig 2 dimension 35 - because there are problems with matching. Other than that, I generally recommend.

Review translated automatically

Reliable opinion

2024-10-31, 09:06

View original

Явор

These Keihin Carburetor Gaskets are the only ones I found on the internet that are on this site and it's good for everyone to know that there is a difference in the average Keihin Spore Carburetor Gasket With the KTM and beta 525 you have to be careful because the betas have older carburettors and the newer gaskets despite the specification of the carburettor do not fit and these gaskets are the correct ones for the Beta and KTM

Review translated automatically

Reliable opinion

2021-11-12, 10:37

View original

Daniel

Part I'm Daniel I have a 2016 Aprila RS4 125 in which it was time to replace the chain I decided to buy a gold D.I.D chain from Gmoto.co.uk and I do not regret it. The delivery was within 3 business days and the installation was very easy, pleasant and I did not need any special tools. As a customer, I am very satisfied and heartily recommend this store. Ps. Sorry for the quality of the photos but I have a broken camera on my phone.

Review translated automatically

Reliable opinion

2020-09-26, 09:52

View original

Jacek

I have a 2003 Honda XR 125 L. I was replacing the clutch now for the second time, the discs worked fine, they really lasted with me for about 10,000km. Now I installed them for the second time and everything went without the slightest problem. (Psst. Make sure that for your motorcycle you don't need any specialized key in the motorcycle manual and check how many discs are needed for your motorcycle, in my honda - 5)

Review translated automatically

Reliable opinion

2018-10-31, 20:39

View original

Łukasz

Yamaha dt 80 lc2 1992. The fender looks cosseting, it is made very aesthetically and precisely, with a durable and break-resistant material. Despite the fact that the fender is not adapted to the DT model, its installation went quickly and smoothly. The fender arouses interest among colleagues and attracts glances. I recommend this product to people who, like me, want to add character and improve the appearance of their machines. :DD

Review translated automatically

Reliable opinion

2017-07-22, 11:04

View original

Adrian

Honda NSR 125 vintage 98. HEL brake line I purchased with safety in mind, the product definitely improves the quality and braking power. The workmanship of the cable and the ends is very good. The product fits perfectly in place of the original one and blends into the color scheme of the motorcycle. The only downside is the screws included in the kit, they have a larger thread pitch by which you must use the original ones. I highly recommend the purchase of this product.

Review translated automatically

Reliable opinion

2020-12-08, 08:45

View original

Krzysztof

Greetings. I have a 1969 WSK B1. This spark plug fits this motorcycle perfectly, it is in accordance with the manufacturer's recommendations. I tried different solutions and warmer and colder, but the candle with these parameters is the best. The motorcycle burns smoothly regardless of whether it is warm or cold, works evenly, has adequate power. Besides, this is an old solid company and I have a lot of sentiment for it. I recommend and greetings

Review translated automatically

Reliable opinion

2020-07-10, 12:04

View original

Dominik

I bought stationary,tank cap and steering wheel lock came the package in no time, the quality of the product is super everything worked out perfectly the seals hold well and there was even a protective film on the locks. I received two keys still.I am very satisfied with this product,quickly installed and works as it should. Price also very good in total the cheapest in all these other auction sites. RECOMMEND HIGHLY.

Review translated automatically

Reliable opinion

2024-09-19, 08:30

View original

Cordea

Produsele au ajuns in perioada mentionata. Curata super bine lantul. Spray-ul de ungere e lipicios si tine fara probleme intre 500-700km. Este alb deci nu trebuie sa iei reper de unde incepi sa ungi. Setul contine si perie. Pana acum am folosit doar acest tip de spray de curatare si lubrifiere pe un cb650r din 2023. Lantul e impecabil dupa 14 000km. Am comandat mai multe seturi datorita pretului avantajos.

Review translated automatically

Reliable opinion

2017-07-15, 09:23

View original

Dawid

2000 Honda CBR 600F. The regulator works as expected + good price. I had previously tested a custom-made regulator, purchased at reg_mot.republika.pl, and unfortunately found that it drew current at a standstill, and was quite a bit larger than the standard regulator and required rearranging the components under the fairing. Tour-max regulator is the same size as the original, works perfectly. I am satisfied, I recommend it!

Review translated automatically

Reliable opinion

2019-05-31, 07:31

View original

Hubert

The quality of workmanship is very good. Previously purchased cable (same model) drove as many km as the original and I only replaced it as a precautionary measure. From helpful remarks I can confirm that although it is dedicated to f650gs it fits the G 650 GS I ride every day. An additional plus is the fact that you support domestic production, which does not differ in quality from the originals so there is no point in overpaying.

Review translated automatically

Reliable opinion

2021-07-08, 10:43

View original

Zzaspa

The lampshade is very close to the original. I would even say that a person who does not know what to look at will not notice that something is wrong. The embossing is identical. It is known that the inscriptions on the lamp will also differ. To the biggest difference between the original and this part that the store is the reflector. In the original it is flush with the rest and here convex. But I still recommend it. In the photo the original is mounted on the lamp

Review translated automatically

Reliable opinion

2024-09-08, 05:14

View original

Mateusz

I recently purchased a product for my beloved motorcycle called KTM sx 125 and was looking for trusted sites on the Internet but could not find any until I suddenly came across gmoto.pl. On the site there is a huge selection, it is very easy to find parts for your motorcycle because there is an option "choose a vehicle" very fast delivery and prices are not exorbitant and the site is highly recommended. Greetings?

Review translated automatically

Reliable opinion

2024-07-23, 19:00

View original

Mietek

The drive kit for my old and venerable Yamaha SR 125 as at first glance looks quite good. Solid manufacturer, decent material and the kit fits as if it was tailor made. I hope it will also perform well during operation. Forgive me for not duplicating photos of the sprockets or chain, I prefer to paste photos of my SR, nicer and more interesting. Greetings and recommendations.

Review translated automatically

Reliable opinion

2024-11-07, 07:44

View original

Maciej

Perfect deep sound showing the true sound of milwaukee eight. The paint job perfectly matches the color and texture of the stock covers. Quality workmanship and finishes at the highest level. The only extra step when installing to the 2024 Road Glide is to wind or reposition the sealing tape from the stock ones because the diameter of the mufflers is minimally larger than the manifold pipe.

Review translated automatically

Reliable opinion

2017-12-19, 10:10

View original

Tomasz

Honda CBR 125 year of production: 2005 DID drive kit, is a set of drive sprockets and chain. The chain is packaged disassembled, which makes installation very easy (chain clasp and connecting link is also included). The assembly goes smoothly, the parts are marked with the same symbols as factory assembled, this confirms the originality of the offered product. Recommended!

Review translated automatically

Reliable opinion

2024-06-17, 04:24

View original

Michał

I am happy to recommend GMoto company. I ordered a hard-to-find part for the front suspension from them, and it was a rubber bumper from Kayaba, which with 100% certainty fits the '03 YZ250F, because I put it on that motorcycle. If they didn't have it I would have had to send the part from Japan - which would have been very expensive. Quality, fit appropriate for the price. I recommend to all interested parties

Review translated automatically

Reliable opinion

2023-02-04, 08:43

View original

Bartek

Hello, I own a moped Ogar 205 for which I just purchased this carburetor. I can consider the quality of workmanship of this carburetor from duells company as satisfactory because there are no problems with leakage from under the flap of the float chamber and with the adjustment itself because the factory-installed nozzle is sufficient, and the carburetor itself responds to adjustments, which I have not experienced in cheaper substitutes.

Review translated automatically

Reliable opinion

2022-03-24, 16:12

View original

Mariusz

Hello.The cable for connecting the charger with the Optimate indicator I connected to the motorcycle bmw r1150r.Made aesthetically,easy to connect.Works extra,for now shows the status of my damaged battery,which can be seen from the indications,that it is to be replaced.In addition to the company's mini charging socket,I have a direct connection to the battery.I am satisfied with the purchase,I recommend.Regards.

Review translated automatically

Reliable opinion

2020-11-02, 14:01

View original

Marcin

The candle seems to be of good quality cool that it is thrown with a SAE nut on the tip, so it fits a variety of pipes. The only thing to keep in mind is the gap between the electrodes, which should always be checked, in my case it was too large. It is also worth adding information about the length of the thread with the electrode, I did not manage to find it in the description, and for this candle it is about 14 mm.

Review translated automatically

Reliable opinion

2024-10-25, 06:02

View original

KTM Duke II

Best price and quality you can get on the market! This is original part! Arrived one day faster than expected! Will buy again! Piston measurements are correct as stated in description. I plan to install the part in KTM Duke II 640. Original bore is 101,00mm and You need to overbore cylinder to 102,00 mm to fit this piston + head gasket from KTM 660 SMC whis is about 102,3mm.

Review translated automatically

Reliable opinion

2021-09-29, 10:00

View original

Maciej

I own a Derbi Sende Extreme and I like this product very much because it is small, practical and easy to install a big advantage is that it has its own batteries the only drawback I have noticed is that it does not have a backlit display so you can not see the temperature in it while driving at night, but for such a price I can not complain about anything. I heartily recommend it.

Review translated automatically

Reliable opinion

2020-08-17, 08:33

View original

Marian

CZ350, capacity 350 year of production 1986 Iridium spark plugs, which I purchased through the portal, completely changed the work cultore of the motorcycle. The equipment fires up from the so-called first kick, works nicely on two cylinders and the full power of the motorcycle returned. Now riding this old man gives fun. My next purchase will be iridium spark plugs. I recommend the store and recommend candles from this manufacturer.

Review translated automatically

Reliable opinion

2018-11-19, 17:53

View original

Dariusz

Patient Junak 123, the sprocket with the most similar parameters to the factory (ignoring the number of teeth). The difference in dimensions is only the diameter of the shaft. Here 20/16 and in the Junak 20/17, the cutters can be sawed to the dimension of 17mm without any problem. The rest fits perfectly. Visually you can see the bdb quality of workmanship. No more chain snatching and ovalization. After fitting 0 backlash and enjoy a successful job.

Review translated automatically

Reliable opinion

2022-10-19, 08:12

View original

Krzysztof

The covers effectively protect the handles. Tested. They can be raised higher or lowered adjusting the level of wind protection. Solid material, aesthetically pleasing workmanship. The kit includes everything you need to mount on the handlebars. I put them in place of the original ones for the Transalp 600 and the moto immediately looks better, and off the asphalt I do not fear for the handles and hands. I recommend!

Review translated automatically

Reliable opinion

2020-08-23, 11:15

View original

Jakub

Yamaha sr 125 97' The whole kit solidly made. After replacement it rides great, when letting off the gas no disturbing sounds are heard. The black sprocket fit nicely into the color scheme of the moto (maroon-black). Compared to the old drivetrain, acceleration is much improved, nothing skips. For such a price, you won't find a kit with only "brand names" in it.

Review translated automatically

Reliable opinion

2019-03-17, 20:29

View original

Łukasz

Honda hornet cb 600 2004 year pc36. Product as described. Installation of the cables takes about 1.5 hours for people who do it for the first time :), more time probably You need to spend on the arrangement of cables so that it was good :) I recommend, after installing the cables and filling the system and, of course, venting the brake handle has become harder and thus the effectiveness of braking has increased.

Review translated automatically

Reliable opinion

2024-09-21, 08:52

View original

Schmél Tamás

Tökéletes választás volt! Minden szükséges alkatrészt tartalmaz, így nem kellett semmit külön beszerezni. Az alkatrészek pontosan illeszkednek, így az összeszerelés zökkenőmentes. Az esztétikája is rendkívül tetszetős, a kipufogó tökéletesen passzol a motorhoz. A tartóssága is ígéretes, masszív és jól megtervezett, így hosszú távon megbízható választásnak tűnik.?

Review translated automatically

Reliable opinion

2018-05-08, 15:54

View original

Michał

I ride a yamaha tzr 50, the kit I highly recommend easy to use just a cloth to clean and lubrication even simpler the grease is white also you can see where it is lubricated but it is not like I have a white chain, from a distance it looks normal, it immediately dries on the chain and holds nicely at my speeds, it does not dirty the rim the brush also helpful for cleaning.

Review translated automatically

Reliable opinion

2017-09-13, 20:53

View original

Paweł

Romet 50-T-1, 50ccm, year of production 1982 The sticker photos on the website are VERY different from reality. I was sent a completely different design than the one shown in the photo, on this auction. I attach a photo of how the auction differs from reality. As you already sell such stickers, however, it would be fitting to take care of a photo showing the actual state of the product!

Review translated automatically

Reliable opinion

2018-05-16, 23:39

View original

Damian

I own a 2002 Yamaha Fzs 1000 Fazer. I purchased steel braided brake lines from HEL. The quality of the lines is great, they look great. I had to do a bit of fiddling to fit them to my Jadzia, but the end result is most satisfactory. The brakes go like razor blades. Brake stroke much smaller, per finger. Everything according to the plan :)

Review translated automatically

Reliable opinion

2018-11-30, 13:55

View original

Radosław

The purchased kit produced by Almot looks really promising. I think that the increased capacity of the kit should revive this little engine a bit. For those who will still have doubts, I refer you to the following link, where I have prepared a small review and comparison with the factory ZMD kit. http://motomaniacy.com/viewtopic.php?f=1&t=36327&p=502577#p502569

Review translated automatically

Reliable opinion

2024-06-07, 04:47

View original

łukasz

Taiwa product made of durable plastic No scratches on the paint, hard to find product. Much praise is due to gmoto company great fitting wheel arch. Before installing it, it is best to bury the cables behind the tank or, better, on the side, because you can see the cables and the coil, which also has to be moved somewhere. The wheel arch is short and does not reach the engine cover.

Review translated automatically

Reliable opinion

2018-11-06, 15:41

View original

Damian

Hello I ride a ktm sx 125 2002r I will add that I have never been in contact with the brand polisport before. For anyone who has doubts I can honestly recommend the product. Everything fits beautifully color vivid, shines. Looking at the quality of the plastic it looks solid, but I think it is a little more rigid/hard than the predecessor brand "ufo".

Review translated automatically

Reliable opinion

2022-06-12, 09:51

View original

Mateusz

Yamaha yzf r125 2009r. The product came on time, although someone had already used it, among other things the rings were unpacked the pin also and was wet in oil, the cylinder was also wet in oil and had minor scratches as if it had already been installed. Yamaha after installing the 63.00mm ceramic cylinder It began to wavy revs and sometimes it can even stall.

Review translated automatically

Reliable opinion

2024-09-23, 08:45

View original

Richárd

1986-os Kawasaki GTR 1000 első fékéhez rendeltem. Tudom hogy hátsó féknek van hirdetve, de cikkszám szerint jónak kellett lennie. A nagyobb betétek fülén lévő négyszögletes furat oldalait meg kellett csiszolnom, csak úgy ment rá a féknyereg csapokra. 1-200 km volt nekem mire bekoptak a betétek, előtte kemény és gyenge volt, azóta kiválóan működik.

Review translated automatically

Reliable opinion

2022-02-20, 09:31

View original

Jan

Yamaha XT125, the chain looks very nice and solid, very good quality workmanship, nice and vivid gold color, well forged(it was hard to unforge to shorten it) which I consider a plus, the only minus that there is is a "pin" in black color which does not fit very well. In the picture the chain and the motorcycle a little dirty, but you can see more or less how it looks.

Review translated automatically

Reliable opinion

2019-03-02, 11:27

View original

Jawowicz

Jawa Mustang 50 1980. The discs mate with the original clutch basket, and their workmanship leaves little to be desired. Good value for money. So far, there were identical discs in the Jawa, but I replaced them prophylactically during the overhaul. There were no problems installing the original clutch chain from the old stock on them.

Review translated automatically

Reliable opinion

2024-11-15, 12:21

View original

Bogdan

Imi doream acest produs de ceva vreme si acum a venit vremea sa îl achiziționez. Acest ax cu came are autodecompresor, deci la motocicletele Yamaha WR sau YZ 400 pana in 2002 nu mai e nevoie sa fie folosit decompresorul de pe ghidon la pornire. Cunoscătorii stiu exact ce este. L-am primit in timp scurt, totul OK. Axul este fabricat in SUA.

Review translated automatically

Reliable opinion

2024-09-20, 14:39

View original

Илия

Много добре, точно каквото търсех. Благодаря ви ! Качество на изработка е Високото качество на изработка е от съществено значение. Прецизното изпълнение и вниманието към детайла са гаранция за безупречен резултат. Доверете се на майсторство, което се откроява с прецизност и професионализъм. Изберете качество, което ще ви радва дълго време.

Review translated automatically

Reliable opinion

2024-10-18, 16:55

View original

Aymeric

Boitier CDI identique à l'origine à part la couleur des fils qui sont un peu plus longs donc c'est plus pratique pour le branchement. Ceinture caoutchouc de fixation non fournie avec, comme sur la photo mais il a exactement les mêmes dimensions donc celui d'origine y va parfaitement. Beaucoup moins cher que d'origine pour le même travail.

Review translated automatically

Reliable opinion

2024-09-19, 04:58

View original

Péter Mariann

Az én kis csodajárgányomhoz vettem ezeket a fékbetéteket. A fékbetétek cseréje után jobb mint újkorában,életre kelt az én elektromos rollerem. ? Azóta pedig már sok-sok kilométert tettem meg a szép városomban Budapesten. :) Ha még szükség lenne rá biztos itt fogok vásárolni ,hiszen tökéletes minőség és tartós alkatrész. Köszönöm ?

Review translated automatically

Reliable opinion

2024-11-12, 12:15

View original

Valentina

A termék tökéletes állapotban érkezett. Minden centimétere pontosan megegyezik azzal a tükörrel ami eredetileg a Niu N1S tipusú elektromos robogómon volt gyárilag. Nagyon könnyű felszerelni és a Gmoto oldalán nagyon kedvező áron tudtam megrendelni. A kiszállítás is villámgyors volt. 100%-ig elégedett vagyok a termékkel és a weboldallal.

Review translated automatically

Reliable opinion