Forgot password
Order status
Free delivery from 150 euro
Manufacturer
Price
Sort
Options +6 
€21.92
Lowest price from 30 days before discount: €27.40
Fits on the frontEBC FA 196 V brake pads (2 pcs.)
(9) 
Options +6 €19.77
Lowest price from 30 days before discount: €24.72
Fits on the frontEBC FA 196 brake pads (2 pcs.)
(9) 
€8.19
JMP rear automatic stop
€16.88
Lowest price from 30 days before discount: €17.77
Athena rear head gasket Honda VTR 250 Interceptor 89-90 VT 250 Magna 94-97 OEM: 12252KV0721 - S410210001137
from 3
Browse by manufacturer
Products reviews
Used for Honda FT 500 1983. Fitted within the hour (after disassembly & preparation = removal of old bearings). Have used 50 mm pvc pipe to drive bottom cup in; tightness of fit was as it should be. Did not use the supplied washer but made my own of 30x36x3 mm so the original rubber seal could sit below the (inner part of) the bearing. Re-used the original bottom washer (0.8 mm thick) to shield the seal. The (upper) adjustment nut also carries a thin shield. I had to grind the spigot (for the shield, on the nut) to a chamfer, as it just touched the radius of the upper bearing inner ring. On the 3rd picture, where the shield lies under the nut: red arrows = grind inner dia of spigot, shield fits at outer dia (on top as depicted). Ordered a 2nd set for my Honda XBR 500.
Review translated automatically
Reliable opinion
I do not recommend this plug absolutely. The plug did not withstand the first tightening with a torque wrench much before reaching the proper tightening torque. I can't tell where the positive comments under this product come from, maybe with larger diameter plugs it is better. In my case, a simple oil change ended up with a whole day of disassembling and putting the motorcycle back together to remove the broken thread and the magnesium that fell inside the oil pan. The fit itself is not right either, the original plug has more than twice the thread length.
Review translated automatically
Reliable opinion
Very good battery, fitted to a 2007 zx6r that was wearing an AGM type. Nice small size and weighing only 696g compared to the old one which was 3.3kg. with the foam packs you use to fill the spare space it goes to about 767 for anyone interested, very good no problems with starting in both hot and cold weather (right in the photo is the new one)
Review translated automatically
Reliable opinion
Honda NX 500 Dominator 1988 It fits perfectly. It is solid and when it came in contact with the wrench cap, it did not behave like plasticine unlike the old screw. I have already done 1500 kilometers. All in good order. An interesting option with a magnetic tip. I recommend.
Review translated automatically
Reliable opinion
Hello I own a Honda VTR1000 F 1997 I bought a mirror for a small amount of money which is durable, not like the Chinese crap that folds at higher speed and vibrates at slow speed. With a clear conscience I recommend Gmoto.pl store
Review translated automatically
Reliable opinion
1. bolt 12, which is a size 17? The threads fit, but. 2. it cracked while screwing leaving a piece of thread in the oil pan. 3. want to experience a heart attack during an oil change? Only 14.80!
Review translated automatically
Reliable opinion
The screw is professionally made, it holds until nice. It certainly does not drop a drop. The magnet attached to its end is so strong that I had a hard time detaching it from the tool cart. I recommend
Review translated automatically
Reliable opinion
The thread of the plug ok and basically that's it. Unfortunately, the magnet practically does not do its job. It's a waste of money for this particular plug.
Review translated automatically
Reliable opinion
Professionally made instrument, a must have for every DIY enthusiast as well as a professional for the garage.
Review translated automatically
Reliable opinion
EBC FA 142 brake pads are a product that definitely deserves a high rating. First of all, they are characterized by excellent workmanship and durability, which is crucial in terms of safety on the road. The use of modern materials means that these pads offer excellent braking performance in a variety of weather conditions, which will be especially appreciated by drivers traveling in variable climates. Installation of EBC FA 142 pads is simple and does not cause major problems, even for those who are not advanced mechanics. What's more, their design minimizes the risk of annoying sounds, such as squeaks, which is often an issue with cheaper replacements. While using the pads, I noticed that they have very good durability and wear evenly, which translates into a long service life. This makes them a very cost-effective choice in the long run. If you are looking for brake pads that combine high quality, durability and braking performance, the EBC FA 142 will be a great choice. I highly recommend them!
Review translated automatically
Reliable opinion
Honda Dominator NX650 If you are asking yourself whether it makes sense to buy motorcycle accessories by mail order, then calculate the time spent in traffic jams to drive to the stores in search of selected items. My calculation indicates that for a few zlotys it's not worth it to run the car. On Gmoto I found everything I need. Both the price and delivery time are exemplary. I recommend.
Review translated automatically
Reliable opinion
Hello, I recently purchased some bearings shown in the ad. They were mounted to the scythe in the mtd tractor. SKF bearings have good strength and fit perfectly in the places for them. The advantage of the product is all kinds of uses, they perform well in any equipment. I recommend to purchase this product. Greetings
Review translated automatically
Reliable opinion
In my motorcycle, the installation of pads is the proverbial 5 minutes, you can do it without removing the caliper .Pads, I bought organic because they are softer .Maybe they wear out faster, but the disc lives longer .Fitting is good, no problem and nothing needs to be adjusted.Overall I am satisfied.
Review translated automatically
Reliable opinion
I have always dreamed of something like this. Finally I could clean the nozzles thoroughly. amol the tips are so sharp that even if you try, you can enlarge the hole in the nozzle to a given size. So not only cleans, but if you want to enlarge the holes. I recommend 100%
Review translated automatically
Reliable opinion
I use exactly this magnetic oil drain screw in every Honda I have. The screw, despite exposure to harsh weather conditions, does not corrode, does not catch deposits and, most importantly, does not leak. The magnet actually catches metallic flecks and does not lose strength.
Review translated automatically
Reliable opinion
When purchased, the bearing had no play, as befits a new bearing. The bearing has many uses. They can be mounted to wheels that are equipped with a drive on which a very high force acts. This bearing will 100% last more than a typical Chinese bearing.
Review translated automatically
Reliable opinion
Beautiful orange colored hose clamp, unfortunately the rubber in the inner part is very large to the clamp so that you see little of her.better use a smaller rubber then she looks very good
Review translated automatically
Reliable opinion
Hey I was surprised..about the good quality of the battery for this price..I have a Honda Shadow 125 .you realize when you. The bike starts .how powerful the battery is.
Review translated automatically
Reliable opinion
Very good material received well packaged all times the follow-up of order is a little hazardous in spite of everything the deliveryman put the parcel in place on thank you.
Review translated automatically
Reliable opinion
Excellent product and very fast delivery. Excellent product packaging. Highly recommended store. Impeccable service.
Review translated automatically
Reliable opinion
We have Motorcycle parts to Honda VT 250
- Honda VT 250 C Magna 1994
- Honda VT 250 C Magna 1996
- Honda VT 250 C Magna 1997
- Honda VT 250 F 1983
- Honda VT 250 FL Spada 1988
- Honda VT 250 FL Spada 1989
- Honda VT 250 C Magna 1995
- Honda VT 250 F 1984
- Honda VT 250 F 1985
- Honda VT 250 F 1986
- Honda VT 250 F 1987
- Honda VT 250 FL Spada 1990
- Honda VT 250 Interceptor 1990
- Honda VT 250 Interceptor 1989
- Honda VT 250 Interceptor 1988
- Honda VT 250 F 1982