Forgot password
Order status
Free delivery from 150 euro
Manufacturer
Price
Sort
Options +4 
Rozmiar:
€58.84
CNC clutch lever - 228874
Podobne:
Podobne:
€6.35
6005 2RS C3 SKF bearing
from 10
Browse by manufacturer
Products reviews
Reinforcement very solid. I installed in a KTM EXC-350.Previously I rode without and unfortunately the radiator on both sides bent during falls. Installation was no problem, especially since I had to replace the radiator with a new one anyway. Here a note - I bought a replacement "Psychic" and it differs in the number of inputs from the OEM - the manufacturer assumes that we want to give up the thermostat right away and there is one less circuit - for me this was a plus. Going back to the "back" - in the right one there is a place to install a fan. I installed an aftermarket one and although the hole is a little smaller, it was possible to fit it in.
Review translated automatically
Reliable opinion
Repair kit clutch pump KTM SX 125 Pros: -Quality - good as standard. -accurate fit -New screws for the clutch fitting included - Complete set Cons: -The new spring was partially stuck when pumping the clutch (came back very slowly) so I had to reuse the old spring. -clutch cylinder is made of plastic (not aluminum) Nevertheless, I am generally satisfied and would recommend it to others, as it is leak-proof!
Review translated automatically
Reliable opinion
In general, the film for such a price is really well made, it fits nicely on the plastic, looks good, but it could be a little thicker and stiffer. I have had the film for more than 3 years now and it presents itself as in the pictures. ( The cut was caused by a crack in the plastic)
Review translated automatically
Reliable opinion
I have a scooter with a capacity of 50ccm Yamaha, zachtielo se mi tuning so I ordered a foliu a must sayet ze super podajna ladnie trima a wiglond perfekt bardzo jestem zadowoleny wsem wrele doporuczam daju sie zrobit czuda ocieniam foliu za super pomisl a bardzo dostempna cenowie.
Review translated automatically
Reliable opinion
Merchandise purchased as a set along with other pan.It is difficult to determine the quality of the product two hours after installation, preliminary assessment is positive, I have done the sizing of the pan, it is in accordance with the service manual. Everything assembled, fits, no backlash.
Review translated automatically
Reliable opinion
It is difficult to determine the quality of the product two hours after installation, the preliminary assessment is positive, I did the sizing of the pan, it is in accordance with the service manual.Everything assembled, fits, no backlash.
Review translated automatically
Reliable opinion
WSK 125 75r | The frame fits in the org. holes in the rear lamp mount. I recommend, because this product is worth its price and it is practically indispensable in the mounting of the plate.
Review translated automatically
Reliable opinion
Good copper pad a lot of size options price good relative to the quality of workmanship well here I really order everything I need from gmoto and I am always satisfied.
Review translated automatically
Reliable opinion
In this price range, there is nothing to complain about. The product will do its job. It should certainly survive more than one motorcycle trip.
Review translated automatically
Reliable opinion
Professionally made instrument, a must have for every DIY enthusiast as well as a professional for the garage.
Review translated automatically
Reliable opinion
I maintain the forks of my ktm and this tool is necessary to be able to open and close the suspension bottles. The 3/8 square is necessary to be able to attach the torque wrench and give the right torque to the plugs. The thread is very fine and an exaggerated torque can pass it. For the price of this tool we can save a lot of headaches.
Review translated automatically
Reliable opinion
Veneer film looks great , impresses others. However, you need some time patience and skill to veneer with it. I wrapped it with the help of a tanner, which is indispensable stones from my honda cr 125. I managed to wrap all of them aesthetically. Only at many recesses and profiles of the fender the film can not cope and detaches and crumples.
Review translated automatically
Reliable opinion
Bought for my Sx 125 from Ktm. Unfortunately no photo available but old exhaust wool out, this one in. Positive aspects are: Exhaust is quieter! This was my primary aim Also a perfect fit to plug the whole exhaust again if necessary. The old wool was coal black Price/performance unbeatable and a guaranteed buy!
Review translated automatically
Reliable opinion
My Suzi VX 800 is already quite old because it is from 91 and some plastics are faded. This film made them look like new. It is great to apply on faded plastics, which should be degreased beforehand, and the film should be heated with a hair dryer to make it more flexible. I recommend https://gmoto.pl/folia-okleinowa-carbon-50x127,99486.html
Review translated automatically
Reliable opinion
I own a 2008 Honda Varadero 125XL Motorcycle.For proper operation, it is necessary to change the oil in the engine at the beginning of each season. In these changes, the oil drain plug gasket should be replaced periodically. Good gaskets are copper gaskets, which I purchased from Gmoto.pl and their quality is very good at an attractive price. I recommend.
Review translated automatically
Reliable opinion
Unfortunately, the frame is made very poorly, due to carelessly cast material at the edge, the license plate does not fit and it is impossible to close the latches. It is better to spend a few zlotys more for a better quality product that will have the correct dimensions. Despite the not too bad aesthetics, I advise against the product, it does not serve its purpose.
Review translated automatically
Reliable opinion
The pad does its job. The best part, however, is that the store has well-matched parts for the motorcycle model. With many sizes of washers, it's important to buy the right one so that when you drain the oil from the engine, you don't have to look for the right one. We use a new one and we're done ;)
Review translated automatically
Reliable opinion
I have always dreamed of something like this. Finally I could clean the nozzles thoroughly. amol the tips are so sharp that even if you try, you can enlarge the hole in the nozzle to a given size. So not only cleans, but if you want to enlarge the holes. I recommend 100%
Review translated automatically
Reliable opinion
Not an expensive product, it depends on the shapes we will be wrapping. If the scooter has more complicated shapes, veneering can almost become very difficult for those who use it for the first time. If you have no experience with such things, I don't recommend it.
Review translated automatically
Reliable opinion
Frame very cool massive with a cool composing company logo unfortunately I did not use the purchased item because my board is smaller than I anticipated ? but the frame itself I highly recommend as I will measure the size of the board I will order another one like it
Review translated automatically
Reliable opinion
The element is made of good quality plastic, allows for repeated mounting and dismounting. The number and size of the mounting holes allows you to conveniently adjust the mounting of the element. Shape and aesthetics of workmanship at a really good level
Review translated automatically
Reliable opinion
License plate frame very solidly and aesthetically made, the size of the plate perfectly matches the size of the license plate, the mounting holes of the frame even fit into any bracket that are found at the motorcycle.
Review translated automatically
Reliable opinion
A washer made of good copper. It fit under the drain bolt on the Honda CBR125R. Remember to warm up the engine before changing the oil. When the oil has already fried a sturdy bottom so that the washer does not come in contact with the old oil.
Review translated automatically
Reliable opinion
Honda St 1300 126 hp 80k hp 2002r , I bought the motorcycle in the commission and there standard commission frame, a little diso-polo with such a ride that's why the frame with the inscription HONDA will perfectly match the new machine ;)
Review translated automatically
Reliable opinion
The wadding is good and does the job, while at a similar price you can buy athena wadding and it is a good replacement, but it is better to buy athena because it is more trusted.
Review translated automatically
Reliable opinion
I have 2 old oilers reliable equipment frames fit like a glove I bought 2 pieces well fitted to the dimensions of the board simple to use good material highly recommend
Review translated automatically
Reliable opinion
Romet scmb 125, I bought a frame for the reg plate.Appearance , size, quality, price - very good. I recommend! Delivery prompt and well packaged.
Review translated automatically
Reliable opinion
I am satisfied, I got it for the exhaust of my motorcycle. The exhaust is tiny so I have a stock for maybe 100years. haven't tested it yet but it will work.
Review translated automatically
Reliable opinion
What to write. A lot of screw cutouts to fit and screw centrally in each vehicle. Also in a Chinese electric. Fits like a glove.
Review translated automatically
Reliable opinion
Benelli TNT 125 quick and easy installation for everyone. Shipment ordered for parcel machine shipped quickly. I recommend this product to everyone as well as the store.
Review translated automatically
Reliable opinion
Cheap battery that does the job for 125 honda Varadero Fast shipping. Good price. Too bad there are shipping costs.
Review translated automatically
Reliable opinion
This is not the first time I have ordered from Gmoto yet I have not been disappointed shipment always fast on time products also as described I recommend
Review translated automatically
Reliable opinion
Fits description Fits perfectly on the quad. Very good value for money. Quality of life remains to be seen.
Review translated automatically
Reliable opinion
soundproofing very easy to work with and good quality with beautiful woven fiber. efficient absorption and lasts well over time.
Review translated automatically
Reliable opinion
The locking element of the plate falls out, so I screwed it on. Once I had a similar patent and lost the plate, then I did not screw.
Review translated automatically
Reliable opinion
Very good workmanship, prompt delivery. Implementation in accordance with the order. Product definitely worth recommending.
Review translated automatically
Reliable opinion
It's a pity that in the feedback there is no option of feedback to deliver, here you should be rated three, the rest as in the best order
Review translated automatically
Reliable opinion
Perfect. The item is identical to the original. The delivery time is satisfactory. I recommend this site.
Review translated automatically
Reliable opinion
Everything in the best possible order. Frame made of good quality plastic, sheet metal fits it and holds well.
Review translated automatically
Reliable opinion
Instant shipping products as described very good contact with the seller. I recommend with a clear conscience.
Review translated automatically
Reliable opinion