Forgot password
Order status
Free delivery from 150 euro
Manufacturer
Price
Sort
€25.57
CPS28 ignition coil - CPS28
Options +3 
Podobne:
rodzaj:
from 4
Browse by manufacturer
Products reviews
Discs very well made clutch goes very well springs also very well I would like to remind other customers that you need to put the spacers on the rounded side to the engine and preferably the discs, spacers and springs should lie at least 24 hours in oil The product is very good company also I recommend this is probably my fifth order at gmoto and they have never let me down
Review translated automatically
Reliable opinion
Chinese CPI 50cc 2t - the frame certainly improves the aesthetics of the moto. Stably holds the plate and there is no chance for it to fly out while riding. Installation is easy and fast, worth recommending:)
Review translated automatically
Reliable opinion
I recommend this carburetor. I put on the Derbi everything perfectly for such a price. A very big advantage is the set of nozzles that comes in the box and you can adjust the carburetor.
Review translated automatically
Reliable opinion
Yamaha dt50x 2006. Shift lever well made nothing was cracked package well protected arrived after 23 hours from shipment
Review translated automatically
Reliable opinion
Product of very good quality, it fits Romet Ogara 200 very well. The frame does not interfere with either the lamp on the fender or the splash pad. I recommend :)
Review translated automatically
Reliable opinion
Motorcycle Romet Pony vintage 1984.Quality as well as workmanship of this item very good. For more than a year zero problem
Review translated automatically
Reliable opinion
I own a Rieju MRT moped with am6 engine, fits perfectly, good material and quality. I heartily recommend.
Review translated automatically
Reliable opinion
I have a ktm 85 sx and there I put these pads to ajp caliper and Chinese pump and I brake much harder than the original ones.
Review translated automatically
Reliable opinion
Professionally made instrument, a must have for every DIY enthusiast as well as a professional for the garage.
Review translated automatically
Reliable opinion
I bought this cylinder as a replacement for the original one on my CPI SM 50 and it has really lived up to my expectations. The quality of the cylinder is impressive and I immediately noticed an improvement in engine performance. Description of the product: The cylinder is made of durable materials and is a perfect fit for the AM6 engine. With a bore diameter of 40.20 mm and a volume of 50 cm³, it is an ideal solution for those who want to keep their engine optimized without compromising on durability. Installation was simple, thanks to the precise fit and included installation instructions. Vehicle: I installed this cylinder on my 2006 CPI SM 50 You have to remember to take off the black gasket thingy though, I forgot to do that
Review translated automatically
Reliable opinion
Unexpectedly, this carburetor surprised me with its price/quality ratio. I expected a "lousy" product for this price, but as it turned out later it is simply great. My colleague also has this carburetor (Yamaha Aerox 70cc) and I (Aerox 70cc), which factory had a carburetor with a 12mm throttle and were not very eager to start nimbly, after installing a 21mm carburetor from Gmoto, which that one was very easy because the fit of the parts was very good, the motorcycle suddenly gained power and a lot of acceleration. A colleague has had this carburetor for about 3 months and nothing has broken down yet. I recommend this carburetor as much as possible, it is not worth overpaying for much more expensive carburetors, as this one is definitely made perfectly.
Review translated automatically
Reliable opinion
Benelli 491 98r I was tempted to buy a frame from gmoto because when I bought something in the service and got a lanyard with the signature gmoto free of charge nice gesture fell to my liking so much that I wanted and frame for registration because it caught my eye somewhere there and the choice quite right why the quality without comparing to those frames from the office solid does not crackle holds the plate as expected does not vibrate the plate on the free under the plate a lot of holes and a lot of space for screwing such a head m8 fits easily visually polished and the same signature is not the usual print but a kind of silicone sticker and most importantly the clips hold like hell I do not have to worry about losing the plate
Review translated automatically
Reliable opinion
I ordered this carburetor for a TZR 50 it fits right away I have to say for this price it is really a bargain the carburetor is really cleanly processed it is very cleanly packaged and makes a good impression right out of the box I checked the carburetor before installation. In contrast to the Dell orto, there is even a slosh plate in the float chamber. That makes sense and shows that the carburetor manufacturers really know what they're doing. whether you really need it or not remains to be seen. I was very surprised that the Chat even comes with a set of jets, which is great for tuning - I would order it again and again
Review translated automatically
Reliable opinion
The quality of the carburetor is really nice. The carburetor nicely polished from the inside and there are no unwanted lint or other such damages and shortcomings. Additional nozzles for adjustment also very useful. What can I add in the description from myself ? One of the most important information about this gasifier. It has a semi-circular throttle and has power jet nozzles. What for inexperienced people can make it difficult to adjust :)
Review translated automatically
Reliable opinion
Motorcycle Honda NSR 125 (fits perfectly, iridium replacement for the original candle).This is a cheaper version of the candle from NKG BR9EIX, in my opinion, equally good, very good quality, a noticeable improvement in the ,,smoothness'' of engine operation in the full range of revolutions (and especially over 10k rpm). Above that, it is harder to flood and certainly lasts longer than a traditional candle. Recommended.
Review translated automatically
Reliable opinion
Yamaha DT 50 with minarelli am6 engine 2002 year. The product made very carefully but I am sorry to say that it does not fit the new shift shaft bought also on gmoto. The difference in the number and thickness of the cutters for the shafts. It is a pity that in the description the list of matching models misses the truth, otherwise the quality of parts and service gmoto without the slightest complaint.
Review translated automatically
Reliable opinion
Gear shift lever made perfectly and so it fits. Thanks to it, the appearance of my motorcycle has improved, in addition, I have no worries that the lever will bend like the previous one because it is foldable. In addition, it is shorter, which has improved the comfort of driving. I rate the product at 9.5/10. Really recommendable for this price.
Review translated automatically
Reliable opinion
The carburetor I ordered for a Kawasaki KLF 300 quad fits snugly, the only problem is the location of the gas line, as in the original it is on the side of the carburetor and in this case "from the top" and is a little too close to the tank, but a new gas line with a metal elbow solved the problem. The carburetor can also fit the Honda TRX
Review translated automatically
Reliable opinion
The product of a well-known and often chosen tuning company, the fit with the connecting rod and piston pin good without excessive play, the bearing currently traveled has about 3k kilometers no disturbing symptoms and sounds. Workmanship and finishing at a high level, plus an attractive price highly recommend.
Review translated automatically
Reliable opinion
Very good bearings. Favorable price. The quality is much better than those Chinese and other for 8 PLN. It is worth putting a few pennies for them because we have the certainty and guarantee of operation, as opposed to cheaper substitutes which once did me a lot of damage. They are not expensive and the quality is very good. I strongly recommend.
Review translated automatically
Reliable opinion
The starter in the quality-price ratio deserves high marks. The build quality from the visual side is fine, from the technical side too. It turns very fast. It always meshes. For this price, you can get this product without a second thought. You will not overpay and will be satisfied. I recommend.
Review translated automatically
Reliable opinion
Zipp quantum gt5 2008r. The carburetor came the wrong one (I got it from simson), it's hard I needed it fast I didn't have time to send it back, after reworking the mount I put on the one I got it turned out that the cable mount is so delicate that the spring from the kit after putting it on ripped out the mount
Review translated automatically
Reliable opinion
Brake pads look very solid , I think it is a very good and durable product , I am satisfied with your store , fast delivery , great availability of parts for a large number of mopeds and scooters. I am satisfied with the parts I ordered .Thank you very much. Have a nice day.
Review translated automatically
Reliable opinion
I have always dreamed of something like this. Finally I could clean the nozzles thoroughly. amol the tips are so sharp that even if you try, you can enlarge the hole in the nozzle to a given size. So not only cleans, but if you want to enlarge the holes. I recommend 100%
Review translated automatically
Reliable opinion
I ordered the carburetor for my 2009 Beta RR50 motorcycle, the fit of the carburetor to my bike is perfect. The carburetor worth the price even I would give more, the workmanship is good, and as for the aesthetics I would improve a little, the carburetor really performs great.
Review translated automatically
Reliable opinion
Hello, I own an Aprila Mx 50 from 2002 and I ordered a needle bearing from top Racing, the installation was quick and efficient, everything fit superbly and the bearing is of excellent quality, the next bearing I buy will certainly be from top Racing, it is great.
Review translated automatically
Reliable opinion
The carburetor comes very complete and with spare gums that facilitate the carburetion, I have not been able to get it to work but I do not know if it is a problem of the carburetor or the cylinder I have on. The purchase is reliable and the part seems to be of quality.
Review translated automatically
Reliable opinion
at this gasser there is a hose from the overflow immediately after unpacking was cracked one of the plastic holding the hose hopelessly disintegrates in your hands the rest of the gasser ok except that sometimes it leaks something is jammed inside
Review translated automatically
Reliable opinion
Frame like a frame. The plastic is fine, the fit to the holes is fine, it's just a pity that it comes already snapped, because you have to gently disassemble it from behind releasing the catches to insert the board and snap it back in.
Review translated automatically
Reliable opinion
Hello I recommend this product because it is made of very good and durable material the product does not have any errors such as holes in the spigot is not crossed rubber is in very good condition I recommend.
Review translated automatically
Reliable opinion
The spigot of very good quality, my customer is very satisfied with the tuning of the equipment. The kit installed in DT 50 along with other components from Gmoto wholesale. I received professional comments from the wholesale support department.
Review translated automatically
Reliable opinion
Suzuki TS 50(80) 1991r, 13000km. The carburetor came with a damaged plastic spigot probably from the overflow (not important). After installation, the carburetor immediately works, a minor adjustment of the composition of the mixture and there. recommend the product.
Review translated automatically
Reliable opinion
Yamaha TZR 70/50 2007. The quality of the parts is very good. Components of the kit are well and aesthetically made . Installation of the pump went smoothly, everything is identical to the original. Nothing leaks, etc. I recommend!
Review translated automatically
Reliable opinion
The quality of the bearing is very good , without any reservations. It is well-fitted into its place without any unnecessary play. Aesthetics in the best possible order, price to quality. I am satisfied with this product.
Review translated automatically
Reliable opinion
I recommend, good price for the quality. Included were nozzles of other sizes so there were no problems with the adjustment. Mounted to husqvarna te 125 /180 goes perfectly feel that it has a better response to the gas.
Review translated automatically
Reliable opinion
Super quality bearing, in the shaft holds perfectly, the product tightly, well packed had no chance to spoil during transport. The product is qualitatively better than I expected for the price. I recommend
Review translated automatically
Reliable opinion
Yamaha dt 50re Frame very well made, the quality of the plastic is sensational and the number of mounting holes allows you to accurately attach the frame to the holder. For the price of 7zl you will not find anything better.
Review translated automatically
Reliable opinion
CPI SM 50 2007r.A good replacement for this price worth the money.The flaw is not suitable for the copy of the AM6, which is for three screws and the Original for two.But with a little modification will manage to mount for two screws.
Review translated automatically
Reliable opinion
The quality of the frame very good, the plastic does not seem shoddy at the first touch, the hooks look ok. Longer time of use should verify the product better, but I have good thoughts. I recommend
Review translated automatically
Reliable opinion
I highly recommend, fast shipping and great contact with Gmoto.pl service. You can see that the store respects buyers and there is no problem to make contact. Greetings and heartily recommend.
Review translated automatically
Reliable opinion