Manufacturer
Price
Sort

€90.84
Lowest price from 30 days before discount: €100.93
DID 428 VX 130 X-Ring G&B open drive chain with clasp gold
Products reviews
2024-01-09, 09:49
Jacek
What much to say here, a legan sprocket for a 110cc Quad, for a moped with a 139FMB 50cc engine that is one of the most popular! :) In size 428, which is the "more durable" one, with an H end which means even better hardening and strengthening of the sprocket! Generally when you put it on it IS POWER! ^^ Because, of course, the smaller the sprocket in the front, the more power we have on the rear wheel! But less for the speed. For quads 110cc ideal solution! Because there the power counts the most! My Quad with this sprocket rolls up the asphalt! ;P And on the mud with the gas I have to be careful, because immediately the tunnel to China kicks! ^^ In short, I recommend!
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-21, 14:11
Grzegorz
I made the purchase to modify the Apollo children's quad with a 154 FMI engine. The quad had a disturbed gravity feed . Faucet integrated with the carburetor solved the problem, in addition, 2mm wider intake channel and 3mm larger diameter throttle from the factory parameters, turned a seven-horsepower quad into a 10-horse "madman" Carburetor is made carefully, came packaged in an aesthetic cardboard box with prints. After fitting , the quad fired up without any additional adjustments . I recommend shopping at Gmoto.pl.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-04-26, 15:53
Igor
Die Qualität der Nockenwelle ist schrecklich. Es gibt Spuren von Rost, man kann sie sogar auf dem Foto aus dem Laden sehen. Beide Lager waren blockiert. Ich schmierte und drehte sie mit Gewalt. Jetzt drehen sie sich, aber mit einem Knirschen, als wäre dort Sand. Sie werden nicht lange arbeiten. Ich empfehle den Kauf dieser Nockenwelle nicht.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-05-13, 12:20
Norbert
The camshaft, for its inconspicuous price, is of very good quality on the shaft after 200km after installation only small lapping can be seen. The bearings on the shaft are of very good quality and the holes are equal to the pinion . The product is worth recommending.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-05-10, 14:24
Mariusz
Romet crs with 156fmi 150ccm engine. The discs are well made and it is very important that the set includes new compression springs, because the old and overheated ones do not perform their function properly, and such an offer you will find only here. I recommend.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-05-01, 08:38
Łukasz
The chain is shorter by half a link. Which caused terrible tension when putting it on I had to purchase another
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion