Manufacturer
Price
Sort
Browse by manufacturer
Products reviews
2020-09-07, 08:47
Krystian
Hello I own a junak 901 with a capacity of 50/70cmm from new purchased in 2011 to date Junak has traveled nearly 17 thousand km What I really like about the moped is the simplicity of the whole motorcycle, there is nothing complicated in the repair process, simple design, availability of parts is huge and easy to obtain. This is the second repair of the engine since new due to the fact that I ride a lot, parts wear out, now I have overhauled the engine again and the motor fires up from a shot, the larger gear ratio gears allowed to run longer in gear and achieve better results speed in km ends as soon as the pointer passes 80 I like to test various products with them especially carburetors and filters to get better results in combustion and on power of course it is possible but several carburetors of different manufacturers of fuel nozzles you need to have to get such an effect . Parts from gmoto I buy because it is a proven seller of parts and really parts are of very good quality than on other sites only now what I bought starter chain sliders significantly differ from the original I would say more that the quality and material are other weaker but for everything there is a way site I recommend to all lovers of unicycles
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-08-19, 11:15
Kazimierz
I put a 110 engine into a 2013 Barton Fighter 50 eco. The engine started and runs well.Not matching are :front sprocket(the 14-tooth one seems to have a different pitch because the chain jumps) , gear shift lever,foot starter and sprocket cover ( you have to cut it to fit ) . You also need to replace the air filter in addition. Another thing you need to get used to is the gear layout - neutral at the highest and the other gears down ( N-1-2-3-4) .You also need to put an additional line to the suction because in the previous carburetor there was a lever control directly on the carburetor.And besides, there is power :) . Greetings.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-07-27, 08:35
lidia
I have a kinroad mini chopper the engine was falling apart and I bought a new engine at Gmoto where it was the best deal.I disassembled the old one and put the new one on.Everything fit perfectly,in my opinion any one could do the same as I did without any help.Gmoto is the best online store today I order and tomorrow it is already at home.Bomb.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-10-12, 07:13
Krystian
Junak 901 year 2017 capacity 49 CC I bought new. It had a lock on the revs and that indeed when it came to me this module quietly into the frame fit. Improved my motorcycle performance screws into higher revs. The quality of workmanship is very good module is larger than blocked but there is no problem with installation in Junak 901
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-02-08, 06:40
Dawid
So I ordered a 110cc engine, 4-speed motor works well in terms of power and you can also ride it nicely, the engine works beautifully at speed, the engine fits perfectly to zipp xrace. If you think to enlarge the engine (replacement )this is the engine I recommend greetings .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-11-09, 07:58
Piotr
I have a motorcycle Junak 905.Its fault was that it does not accelerate in 4th gear, so I decided to buy a 12 tooth sprocket, because I have 13 as standard, so I ordered it.Once it arrived I immediately went to install it simply fit as standard. Now my junak accelerates in 4th gear.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-11-08, 06:27
jerome
Motor very well packed on receipt, complete with accessories, easy to start up and immediately operational. Tested unloaded before fitting to motorcycle, it flips like a charm! I recommend both the product and the site!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-12, 10:39
Dominik
I own a motorcycle Romet Ogar 200.The fuel filter performs very well, it does not leak or let through the "garbage" that may be in the fuel tank. It fully fulfills its role.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-06-01, 10:05
Lukasz
Motor super, quality of workmanship also very good. Fits like a glove in place of the old motor. Speed of shipping surprising. Already on the second day the package was with me. I recommend this store.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-09-07, 08:50
Krystian
The screw does not differ from the original and was sold with the washer included where else you have to buy the washer separately I recommend the product
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-01-03, 14:19
Filip
The module works very well with Loncin 125 and works flawlessly immediately feel more power. Very fast installation. Recommended.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-02-10, 10:44
Radek
I recommend buying this universal fuel filter because it is well made and easy to install at this price it is probably the best fuel filter
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-09-19, 18:52
oni bikers
incredible motor i recommend it runs very well my bike starts at a quarter turn and with the akra line it has become a monster
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-08, 08:32
Monika
Shaft seal18.9x30x5 4T 139 fmb very well made with attention to detail fits without any problem I recommend to everyone
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-12-11, 12:42
Durand
Perfect engine adapted without modification, superb finish and works very well, fast delivery and well protected.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-08, 08:04
Monika
Front sprocket 428 12 teeth very well made with attention to detail fits without any problem I recommend to everyone
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-08-27, 14:04
Parent
Very good engine, frankly it works perfectly. I'll be recommending one next month for my second bike.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-22, 12:11
Jarosław
The filter is good and there is nothing to complain about . It fulfills its role in Benzer Texsas 50 . I recommend !
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-07-15, 09:24
Patrick
⭐️⭐️⭐️⭐️⭐️ Top motor - absolutely recommendable! This is now the 3rd engine I have installed - and as always I am completely satisfied. The price is more than fair for the quality on offer. The workmanship, performance and durability are impressive across the board. Shipping was super fast, everything was well packaged and arrived without any problems. I can recommend this engine to anyone who wants to make their moped faster and more reliable. A clear recommendation to buy!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-08-19, 22:07
Paweł
Hello, I purchased an unlocked module for Barton fighter 50 and honestly I recommend everyone to buy this module on this site. After installation which is literally simple, the motorcycle is unrecognizable. It picks up better, it is much so called ripper and the performance is much better. I measured the maximum speed after the replacement and on the straight 95km/h passed, and I think it would have been able to do a little more, but unfortunately the straight ended. I sincerely recommend this purchase.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-03-08, 22:01
Łukasz
i have a 2007 kingway 50 chopper I bought new starter chain sliders because the old ones were already very worn and while driving I could hear knocking after installing the new sliders the problem disappeared sliders fit perfectly in their place and not as I bought in another store nothing fit here, however, everything fit perfectly I am very pleased with them and I recommend them to anyone who wants to buy them.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-08-06, 09:03
Adam
This is the first time I've ordered a piston from this site, and I have to say that I'm clearly not disappointed. The piston is in very good condition, there's no trace of scratches or anything else, plus everything is very well packaged, nothing to say on that score, and the rings fit superbly, they're not damaged or broken at all, nothing at all. I'm going to put this on my Masai scrambler 50cc with a 70cc cylinder kit.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-10-14, 12:53
Kacper
I have a moped brand Router ws 50 I highly recommend the purchase of this module, my moped began to accelerate much faster and the top speed also increased, on the GPS without the module v-max was about 65kmh and with the module 80. The module is made of good plastic, it is larger than the original but still fits very well, I have it for about 2 weeks now and I really recommend the purchase of this product.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-05-09, 17:44
Rafał
My motorcycle is a Chopper kingway Superbyke XT 50Q-00 I bought and buy parts on Gmoto.pl I bought an unlocked module which unlocked my motorcycle which gave more power and better acceleration finally my engine is working as it should,I am satisfied with the quality of the product its delivery and replacement of parts the company Gmoto.pl in aroused great trust in me thank you and RECOMMEND you
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-09, 15:23
Mateusz
Hi!!I am the owner of a quad 150 atv for which I decided to purchase the above spark plug.The product is doing a great job,I have no reservations about it,you can really use it for a long time .The plug fits perfectly in the hole to the combustion chamber and gets the right temperature during the spark which allows you to keep the combustion chamber very clean.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-01-30, 23:18
Wiktor
Ogar 900, the whole fits perfectly. Used in place of the burned out only the charging coil of the CDI module, after a slight modification of the winding connections and changing the connectors. By the way - in this stator with one coil providing battery charging, it is necessary to periodically recharge the battery!!! After the replacement so far the scooter starts without any problems.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-06-16, 10:18
Michał
The module is a little larger than the standard one, but it fits and can be easily mounted. Electronics flooded with gel, which is a little sticky and will probably collect all sorts of flecks, but you can not see it, so all in all not important ☺️. After installation, the motorcycle gained a little power, collects better at the lights, which is what I wanted. For the price I recommend. Zumico GR 200
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-24, 11:29
Jakub
The product is solidly made, it is a little larger than the original module, however, into the frame of Zippa Pro 50 fits. The bike got a little kick after the change, but there is not a huge difference. The only disadvantage for me is the material with which the module is flooded, it is sticky, so after some time it will collect debris, dust, etc.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-05-14, 07:16
Roger
Very simple ordering mechanism. This is the second time I have ordered this oil seal. The quality is convincing. The price/performance ratio is very good. I can only recommend this item. Intended use: Left crankshaft oil seal. Motorcycle: Ohvale GP-2 190 cc, Mini GP bike, year 2024
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-18, 08:18
Pawel
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-05-20, 19:13
Royer
Very good, very good engine, I am happy to have ordered on this site, I recommend it, good direction of purchases and payment easy and simple delivery on time, good model.,,...,................................I recommend......................................................,..........................,
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-08-17, 21:03
Tomasz
Fits perfectly into my Kinroad Chopper Xt50q. V max unchanged (I close the alarm clock), but much more powerful (it goes over hills it had trouble with before without problems). Replacement took me about 15 minutes, and only because of the strong tightening of one of the screws. In my motorcycle this module is located under the main seat.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-01-16, 13:45
Paweł
Unfortunately I can not recommend this filter, because I got it with a defect, on the weld there was a very small invisible hole through which gasoline poured. I put the motorcycle together poured gasoline and here it dripped, and unfortunately it gave me a heap of work because I had to take everything back apart. But I'm not going to make an issue about a few zlotys.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-08-25, 22:22
Kamil
I have a Zipp pro 50cc motorcycle from 2012 I ordered a starter shaft sealer and Motul 10w-40 semi-synthetic oil as for the sealer is very well made and thanks to this it can be installed quickly and without problems, oil clean and fragrant so you can confidently pour oil into the engine and enjoy the ride.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-05-03, 11:31
Daniel
Zipp vz 50.2016.Previous vehicle kingway king, rode it 75,000km. The puller works well in its purpose. The screw could be sharpened which would not cause damage to the thread when removing the magnet wheel,but skillful application does not cause any problems.Regards Daniel.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-12-25, 23:49
Kamil
I ordered an engine for a 110 capacity motorcycle I got what I saw on the website the company gmoto concrete reliable conscientious I have a couple of motorcycles and only here I do my shopping I recommend if someone is wondering there is nothing to buy boldly goods of 1 class without sciema what is in the description you buy and you have really recommended
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-03-18, 11:21
Mikołaj
It came what I wanted, I thought I would get a piece of Chinese plastic that I would put in my motorcycle, but here I was pleasantly surprised. Exquisite workmanship, I put it in right away without the slightest problems which is a testament to the excellent fit. If anyone is thinking about buying it, I recommend it WORTH IT!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-09-20, 06:02
David
Good aluminum quality, piston rings are very easy to install and the piston only needs minimal break-in as it already fits very well. Disadvantage: Aluminum is not as durable as a steel piston, but the cylinder is not damaged as much in the event of piston jamming
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-07-04, 22:24
Janek
Mega cool puller for 20 days I could not pull off the magnet wheel in the motorcycle KXD 125 I unscrewed the screw and then turned the puller and the wheel came off by itself there was no need to give so much pressure puller for the magnet wheel I recommend 10 out of 10 very durable cool design. I recommend :D
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-10-21, 20:19
Paweł
I run a repair store for single-track vehicles and sometimes I use Gmoto.pl, I am satisfied with the products offered in Gmoto.pl store, I recommend other users of single-track vehicles, parts offered by Gmoto are suitable for repairing single-track vehicles, the price is adequate to the quality.I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion

































