Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
Romet Ogar 205
Manufacturer
Price
Sort
Options +3 
Podobne :
€6.94
Lowest price from 30 days before discount: €9.25
Romet intermediate wheel IIIB engine - 118057
from 9
Browse by manufacturer
Products reviews
Greetings. I have used the light switch - zinc in my two motorcycles: A '63 Junak m10 and a '66 SHL 175. This product works perfectly in both cases. To the eye it looks excellent, but what is important is also a product that is easy to install and works correctly in further exploration. I recommend, in my case it works without complaint . Regards
Review translated automatically
Reliable opinion
Greetings. WSK B1 from 1969 The faucet fits and I must say that it is made solidly and also looks quite well slightly imitates the style of bygone times. When you unscrew the cap the thread fits superbly to the tank. One thing that I modified is this longer tube I shortened because in my opinion it reaches too high. Regards and field. Krzysztof
Review translated automatically
Reliable opinion
The delux gasket is missing a lot, the holes do not fit perfectly for sure. i used maybe 3 from the kit so i do not know how the others fit. Float chamber gasket failed to fit because it did not fit at all. I was guided by the reviews but I see that these super reviews are probably for looks or for that 400zł voucher. P
Review translated automatically
Reliable opinion
Warm welcome. WSK B1 of 1969. I applied such a nut to the front brake cable rod. It is a little smaller than the one I have on the rear brake rod, although both on thread 6. It looks nice and at the same time serves its purpose. I recommend and greetings
Review translated automatically
Reliable opinion
RECOMMEND !!! Store super :) have all the parts - contact satisfactory.Good quality parts - large selection Fast delivery ! ! ! Effects of work and new parts in the picture :)
Review translated automatically
Reliable opinion
The rod is fine, although the original one has a minimally longer adjustment range (another tip I do not cling to, you can bend it yourself, anyway no one will notice the difference).
Review translated automatically
Reliable opinion
Romet Ogar 200 1988. The bumper rubber fits perfectly in its place, fulfills its function 100%. It is made very solid and also looks good.
Review translated automatically
Reliable opinion
Romet 2375 83r. The covers fit perfectly. Nothing sticks out, sticks like mad. Very good quality, not different from the original.
Review translated automatically
Reliable opinion
Romet Ogar 200 r.prod 1986. the switch fits perfectly. It works as it should and looks ok, also recommend at my place it works perfectly.
Review translated automatically
Reliable opinion
Well-fitted quality does not deviate from the original. I sincerely recommend I am satisfied with the aesthetics and performance of the product. I recommend
Review translated automatically
Reliable opinion
Hello I have a WSK 175 I replaced the spokes.Quality very good, material and workmanship also very good. It fits perfectly to the rim.
Review translated automatically
Reliable opinion
The tool cover fits perfectly, no modifications, nothing different from the original. Plug&play product. I encourage you to purchase
Review translated automatically
Reliable opinion
Romet Kadet 780 1988. Once again, the gaskets fit very well. We have a set for virtually the entire engine and accessories.
Review translated automatically
Reliable opinion
Romet 50-T-3 Rubber very good quality, installation was quick and efficient no problems. Product worth recommending
Review translated automatically
Reliable opinion
Romet komar 80 r pret aesthetically made but in my exemplazu turned out to be zakrudki about 5 cm I had to improvise
Review translated automatically
Reliable opinion
Good workmanship, just be warned it does not fit the carburetor from the ogar 200/jawa 50, but yes it is as much as possible I recommend.
Review translated automatically
Reliable opinion
Gaskets super, probably the best there are. Fits elegantly motorcycle does not leak and can stand at home.
Review translated automatically
Reliable opinion
They fit as they are supposed to. They do not differ much from the original, the quality of the material satisfactory. Romet Ogar 200 50cm3
Review translated automatically
Reliable opinion
Everything as in the original everything fits like a glove quality of materials very high. Fits both two mosquitoes
Review translated automatically
Reliable opinion
Ok, they do their job. They look nice and there is no problem putting them on. I recommend and encourage you to buy
Review translated automatically
Reliable opinion
I own a 1985 Ogara 200 the rubber I used as a center foot rebounder fits perfectly. I recommend.
Review translated automatically
Reliable opinion
ROMET OGAR 200 1989. Very good price-quality ratio. They fit well. Difference from the original negligible.
Review translated automatically
Reliable opinion
Romet Ogar 205 1987. One gasket unfortunately does not cover the whole elbow, you will have to use two.
Review translated automatically
Reliable opinion
Great ! The product practically identical to the original :), and the payer new pleases the eye. I recommend the covers !
Review translated automatically
Reliable opinion
Everything according to the description. The product fits like the original. Cover plastic not the worst quality. I recommend
Review translated automatically
Reliable opinion
All ok bolt very good quality as they fit romet kadet motorcycle recommend 100 %
Review translated automatically
Reliable opinion
Mz etz 250 material good and workmanship Great nice appearance, workmanship aesthetic. I recommend!!!
Review translated automatically
Reliable opinion
Komar 2350 , ogar 205 . Rubber very well made , installation went without a problem ,
Review translated automatically
Reliable opinion
I purchased the kit because I needed a clutch-side lid gasket. The gasket turned out to be completely mismatched, even tragic, so much so that I used the old one. Gmoto should change the product because from what I gather this is not the first negative review of these gaskets. In another well-known wholesaler you can buy perfectly matched which means that you can make good gaskets. As for quality and aesthetics, I will not comment because the mere fit made it impossible to use the gasket
Review translated automatically
Reliable opinion
I own a moped from the 80's Romet Ogar 205 with a capacity of 50ccm from the year 88.The product I ordered is a muffler black+bend. Installation of these parts go very well because everything fit as it would have been produced in those years. Stubby will finally ride as it should. I am very happy with this purchase because the appearance and aesthetics of these parts is very good quality I recommend shopping at gmoto.pl
Review translated automatically
Reliable opinion
Romet Ogar 200 '89, Footrests well made, I thought there would be a problem with installation due to the square hole, and thus the inability to rotate the rubber, but it is enough to tap lightly with a hammer to make the rubbers slide into place. As for the aesthetics - on the one hand you can see subtle imperfections in the casting, but they are not too conspicuous, otherwise a very good quality product.
Review translated automatically
Reliable opinion
Romet Kadet, engine 023, a set of gaskets that is most worthwhile, a copper head gasket, a thick and solid carburetor/cylinder gasket and many other useful for this engine, it is not worth buying by the piece. Just remember that for these gaskets do not use any red silicones, etc. It is enough that we lubricate with lubricant and tighten evenly, and nothing will leak .
Review translated automatically
Reliable opinion
They seem to be better than the previous black-painted ones, those bent from the weight of the legs, while in my case the problem was that the outer diameter of these rods which gives rubber is 10 mm and not 12 as in the black, I had to press the footrest rubbers on hot glue and surprisingly holds so far.In addition, went in the primer and color to be sure.
Review translated automatically
Reliable opinion
At the "connection" of the rod to the foot yoke, the safety feature is a pin, and the eye itself is only bent at 90 degrees instead of about 180 degrees. If the pin is lost, the brake rod falls out, which is rather optimistic. I recommend a slight overtightening of the ear, however, due to the hole for the pin, it may break for us.
Review translated automatically
Reliable opinion
Muffler and elbow aesthetically made with nice chrome. In my mosquito minimally does not fit the muffler to the rear bracket perhaps for mosquito 2352 you need a slightly different elbow or maybe the bracket itself is not quite OK. The included copper gaskets have too small inner diameter and there is no way to slide them on the elbow.
Review translated automatically
Reliable opinion
Romet Kadet, this paper can also be used as a gasket for a version of the elbow with a nut, just slide as much as you can into the muffler with the elbow on and cut the rest evenly, then to the diameter of the nut cut a round gasket that will enter the nut . Such a gasket works for me and the oil does not leak.
Review translated automatically
Reliable opinion
Bushings very solid to rometa kadet fit I bought more as if they died. I recommend the purchase and the store. I am surprised by the honesty of the store. I made an order then a second basket and they returned the cash and made in one order. The second situation with the lamp for rometa cheapened they removed the basket and made with a lower price. I recommend the store
Review translated automatically
Reliable opinion
komar 2350,I recently purchased a set of tires with detkki, mounting went without the slightest problem, the tire without interference with the key jumped into place under the influence of pumping, tires have a very similar tread to the tires ,,stomil,, the product is properly made, looks solid, time will show how durable it is, I recommend !
Review translated automatically
Reliable opinion
The sleeve is nowhere near the sleeves coming out in the wsk. In a motorcycle wsk came out with a minimum diameter fi 10mm not threaded and in this case we have a roller furniture nut. This is the first time such a thing has happened to me since I have been shopping in this company. Complain nothing because it is not worth the trouble. Too little value.
Review translated automatically
Reliable opinion
Romet Ogar 205, well-made set, satisfactory quality and appearance, fits well in the hand, non-slip material is a pleasant alternative to the original plastic handles, increases safety. Installation requires force, but for that the rubber stiffly holds in place, no play.
Review translated automatically
Reliable opinion