Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
SHL M04 125
Options +2 
Browse by manufacturer
Products reviews
WSK 125 B1 1971. Expensive, but it is unlikely to be worth playing around with constructing these grommets yourself.- a waste of time. Here we have a complete component ready for assembly. Isolating washers should have a "rim" that stabilizes them in the crankcase holes. I screw the first nut next to the aforementioned isolation washer without a metal washer - this ensures that it will not unscrew. It is a good idea to start the assembly by screwing the pins to the spark plug wires and then only in the crankcase (for high ignition).
Review translated automatically
Reliable opinion
Greetings. 1969 WSK B1 I had a lot of problems with this clutch! In fact, I replaced almost everything, including a set of pushrods and a ball. In fact, the issue ended there. The clutch works properly. The new pushrods work well, the workmanship and dimensions fit super well with the rest of the components. I recommend and greetings. Krzysztof
Review translated automatically
Reliable opinion
Wsk 125 78 and 81r. after 25 years I pulled them out of the barn and decided to restore them for the children.I was looking for a store where I can buy everything I need - and I found it.The parts look ok and the prices are not exorbitant.I sincerely recommend you have almost everything there - friendly service
Review translated automatically
Reliable opinion
WSK 125 1979. The design as original as possible. The material and fit at a high level. The execution of "holes" on the ends of the rubbers raises a little - I remember that the previous batch was made more aesthetically pleasing. On the big plus here I can point out the durability.
Review translated automatically
Reliable opinion
WSK 1969 year b1, the so-called two-frame. Junak m10 1963 and 1965 SHL 1966 and 1967 All these models have such bulbs. This product rarely burns out for me. The light gives good, installation oki so I recommend and greetings.
Review translated automatically
Reliable opinion
WSK B1 1971r The only thing I have reservations about is the size of the nut (19mm). This is far too much to solidly secure with a washer. Originally the nut should be for a 17mm key. I had to grind it up.
Review translated automatically
Reliable opinion
SHL M04 1953r balls of good quality what is most important they are round and very decent plating as for me they meet all expectations highly recommend
Review translated automatically
Reliable opinion
Hello to you, the clutch chain for WSK 125 fits perfectly, the quality also seems very good, put on and enjoy the ride. Greetings
Review translated automatically
Reliable opinion
WSK 125 1982. Quality of material and fit - exemplary. A little spoil the whole aesthetics of the side holes, but even this can be improved on its own.
Review translated automatically
Reliable opinion
Balls like balls looks like good durable stuff. I'll ride around and see if anything happens to them or not.
Review translated automatically
Reliable opinion
The parts offered by Gmoto motorcycle store are of the highest quality. Combined with a huge assortment, this store is highly recommended. Nowadays, unfortunately, it is hard to find parts that can enjoy high reliability and even tolerance in their workmanship. By sourcing from Gmoto store I am sure that each part installed in my vintage motorcycles will perform its function 100% and will serve a long time. Gmoto store is a very reliable company to which you can entrust the reliability of your motorcycle. Best regards and I wish you further success in creating an excellent reputation for the store.
Review translated automatically
Reliable opinion
The parts offered by Gmoto motorcycle store are of the highest quality. Combined with a huge assortment, this store is highly recommended. Nowadays, unfortunately, it is hard to find parts that can enjoy high reliability and even tolerance in their workmanship. By sourcing from Gmoto store I am sure that each part installed in my vintage motorcycles will perform its function 100% and will serve a long time. Gmoto store is a very reliable company to which you can entrust the reliability of your motorcycle. Best regards and I wish you further success in creating an excellent reputation for the store.
Review translated automatically
Reliable opinion
Hello, I am in the process of restoring a 1970 WSK M06 B1 motorcycle. From new, the only owner was my father, so I decided to restore this "monument". The gmoto online store proved to be very helpful, I ordered here many parts without which it would not be possible to repair many components (for example, a bumped head frame bearing). Gmoto store can boast of a very large assortment, the offered parts are of good quality, well protected during transport and quickly reach the customer. Best regards, Krzysiek.
Review translated automatically
Reliable opinion
Sprocket of good quality fits perfectly to the original shaft I recommend this store to everyone because I bought in this store a lot of parts for wsk 125 and here the goods are of very good quality certainly a larger selection than on other auctions where you have to buy from different sellers which is associated with much higher costs, it is nice that there is such a store as Gmoto.pl which has a wsk department and virtually all parts store for 6 plus :) I really recommend
Review translated automatically
Reliable opinion
I recently dug 190mm galvanized spokes for my WFM. The spoke is nice and aesthetically pleasing. I bought it because it fits DT 80 and for this motorcycle you can no longer get original spokes so you have to combine. The advantages of these spokes are that they are easy to stretch and center. The product is worth recommending, the only drawback I've noticed is that they are quite thin for a DT, but for a WFM they will certainly be sufficient, after all, this is a product not intended for DTs. I ride them to this day and nothing happens to them. I recommend.
Review translated automatically
Reliable opinion
WFM-125 M06 motorcycle from 1961. Carcass gasket a little too big. Gasket made of paper .Quality average. But it is possible to fit. Clutch cover gasket fits perfectly. Quality good. Cylinder gasket is too big at the flushing channels, does not fit WFM. Quality good. The head gasket does not fit the WFM. The holes are too large. The diameter of the hole for the piston is too large. Quality good. I bought these two from a competitor and they fit well. Massacre. Just to sell.
Review translated automatically
Reliable opinion
WFM-125 M06 motorcycle from 1961. The gasket fits the dimensions of the G20 carburetor. The problem is that the rubber from which it is made is not suitable for contact with fuel. It bent at first. After 2 days it dissolved it. Bubble unfortunately. I will not return to gmoto because there is nothing. Besides, shipping will come out more than this gasket is worth. I bought 2. It sucks both of them. Not the first thing of such quality. Ehh.
Review translated automatically
Reliable opinion
Jawa 50 mustang 1981 / Original frame head bearings have balls with a diameter of 5mm, while these are 6mm. I think that even looking at the shape of the cup they are too large . As far as Wsk is concerned they will fit as much as possible . Very good price and as Gmoto has already accustomed me . Super fast shipping and nicely protected products . Best regards to motomaniacs
Review translated automatically
Reliable opinion
I own a 1941 DKW Rt125. In the reviews of the chain in question, I read a customer's opinion that it was a perfect fit for his 1940 DKW RT125 and therefore a motorcycle like mine. Unfortunately, Guest must have had a non-original engine as it does not fit the factory motorcycle. It is true that the number of links agrees, but they are longer and much wider.
Review translated automatically
Reliable opinion
I own a WSK B3 motorcycle with a 125 engine which I modified to look like a cross thanks to GMoto company I was able to complete the restoration process of this motorcycle and I am very pleased with such fast delivery from this store I will certainly buy more than one product from this seller. Best regards and have a nice day.
Review translated automatically
Reliable opinion
Balls made in an exemplary manner, perfectly rounded, dimensions 1:1 with the original, most importantly made of very hard material, and this is the most important because in the end it depends on these balls whether the rod will not fall apart while driving on uneven ground. Once again, I emphasize the workmanship and fit exemplary
Review translated automatically
Reliable opinion
Hi I am Patryk and I own a 1962 WSK 125 m06 z2 , and I buy all parts and accessories from GMOTO. The parts are always matched and good quality.They are well packed and protected in the package. I highly recommend this store just in time to buy parts for our vintage motorcycles.Regards
Review translated automatically
Reliable opinion
The chain is very well made with equally good materials. Without any problems it endured the hardships of 6000 kilometers with a load of more than 150 kilograms while circumnavigating the Baltic Sea (more at:http://125cmmieszanychuczuc.blogspot.com/) and also a lapping period of more than 3000 kilometers. I recommend.
Review translated automatically
Reliable opinion
WSK 125 1984.I have been using these chains for several years and they work perfectly. The first one has already shot more than 2 thousand kilometers and is still in good shape. It works perfectly with the original sprockets from the era, but with today's production it also works well. Recommended.
Review translated automatically
Reliable opinion
Hi there, I ordered a front drive gear for wsk125cm 1978r.I was surprised by the speed of delivery and packaging and most of all by the quality of the ordered product I think that now I will look more often and choose products from this company because I am satisfied with the quality.
Review translated automatically
Reliable opinion
The sprocket seems to have been carefully manufactured, but unfortunately it is made of a soft material, which means that with frequent firing of the clutch the teeth can bend a little, but if you drive quietly I recommend this product, generally good for the price.
Review translated automatically
Reliable opinion
I purchased parts for my WFM 125 M06 from 1954 first models engine . I had concerns about whether I would get parts suitable for this model but the product I purchased fit , workmanship fine . Express shipping , I received the parts on the second day . I recommend
Review translated automatically
Reliable opinion
The sprocket fits perfectly on the shaft holes.14 teeth is the best gear ratio for the WSK'i, because it does not lack and first gear and 2 and 3 are correspondingly longer. With a healthy engine with this sprocket, the WSK can break traction even in 2nd gear
Review translated automatically
Reliable opinion
Super, extra, phenomenal because they sent this and that. The transaction like a fairy tale until they are wet my panties. Seller wonderful, worth recommending and praise. I will say briefly, because here narrow are the opinions of the framework: sell to Him, buy from Him or apply to the wound. RECOMMEND!
Review translated automatically
Reliable opinion
Parts perfectly replace the original ones, they also work very well in the Mosquito. If you are not sure if they will be good, believe they will definitely be perfect for your motorcycle. One set is enough for two garlands. I heartily recommend this product.
Review translated automatically
Reliable opinion
Hello I ordered an oil drain plug for wsk 125 I am satisfied with the purchase I received the goods yesterday I already installed the part And everything is ok I recommend buying from gmoto store, and finally I will add that the price of the products really satisfactory.
Review translated automatically
Reliable opinion
A necessary part when completing repair equipment before further voyages. It is also useful in a home workshop. Recommended. More about replacement equipment for distant travel at: http://125cmmieszanychuczuc.blogspot.com/.
Review translated automatically
Reliable opinion
Nice handles, surprisingly fit without gluing tape to the steering wheel, it is worth a few zlotys for the more expensive ones. The only drawback is the pieces of rubber at the ends, which can be seen in the photo, but you can easily finish it with a nail clipper
Review translated automatically
Reliable opinion
It fits most WSK WFM SHL engines. it is aesthetically made. It's just a pity that it's practically a disposable item because after unscrewing the elbow it's practically impossible to put back on. Such is its beauty.
Review translated automatically
Reliable opinion
WSK 125 1985. Dimensionally perfect. Quality of material not tested so far - a little rust coating on the spacers - this is also a minus. Remnants of machining very lowers the overall rating of the product - you need to file a little. I recommend.
Review translated automatically
Reliable opinion
Tappet long hopeless wipes out every time you press the clutch, I do not know how it would be after hardening, but it is worth to add a few zlotys and buy something better or make yourself of some good material I do not recommend
Review translated automatically
Reliable opinion
WSK M06B3 80 r: Nice ball. Unfortunately, while its size is correct (5 mm) it is too small compared to the original worm ball, and it falls out on the engine side when pulling the cover off until it is sealed with grease.
Review translated automatically
Reliable opinion
I have a WSK 125 motorcycle and I was doing a general overhaul garlands fit well and can be installed without any less problem I highly recommend super product almost like the original delivery is without any additional problems.
Review translated automatically
Reliable opinion
The design perfectly reflects the original handles. They differ only in the side, as the originals did not have holes. Other than that, very well made and the diameter of the holes fits perfectly on the handlebar tube and rollgas roller.
Review translated automatically
Reliable opinion
WFM M06, S01 engine - the best set of gaskets I have bought. Very good fit. No need to cut anything , especially the gasket under the cylinder. Fits very well and does not obscure the channels. I recommend it as much as possible.
Review translated automatically
Reliable opinion