Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
SHL M17 175 Gazela
Options +3 
Browse by manufacturer
Products reviews
I bought this reflector for myself for a 2007 Yamaha Drag Star 650. I had a similar one before on my Intruder, so I decided to glue it here as well, not only for safety but also for beauty. I glued it on the rear of the passenger backrest. Made really precisely with convenient self-adhesive tape. The whole job two minutes, looks great, as if it was always there! Greetings Maciek
Review translated automatically
Reliable opinion
Greetings. I have used the light switch - zinc in my two motorcycles: A '63 Junak m10 and a '66 SHL 175. This product works perfectly in both cases. To the eye it looks excellent, but what is important is also a product that is easy to install and works correctly in further exploration. I recommend, in my case it works without complaint . Regards
Review translated automatically
Reliable opinion
wsk 175 wind engine, the seal is made of something that resembles plastic, in the rear part where the gearbox fits, in the front where the crankshaft is shifted by a few centimeters there is no possibility to put it on, it is only suitable for wringing out
Review translated automatically
Reliable opinion
WSK 125 1979. The design as original as possible. The material and fit at a high level. The execution of "holes" on the ends of the rubbers raises a little - I remember that the previous batch was made more aesthetically pleasing. On the big plus here I can point out the durability.
Review translated automatically
Reliable opinion
Thread reduction used to repair the Romet head, fits most of the communist vehicles, it is easy to repair the damaged head yourself, all you need is a drill and a threader of the right size.
Review translated automatically
Reliable opinion
The quality of workmanship does not knock, the handles are dedicated to the SHL M11 and yet the thread does not fit this model of brake cable tensioner, so I have no reservations and I think I can recommend to others.
Review translated automatically
Reliable opinion
RECOMMEND !!! Store super :) have all the parts - contact satisfactory.Good quality parts - large selection Fast delivery ! ! ! Effects of work and new parts in the picture :)
Review translated automatically
Reliable opinion
SHL M04 1953r balls of good quality what is most important they are round and very decent plating as for me they meet all expectations highly recommend
Review translated automatically
Reliable opinion
Warm greetings. Junak M10 from 1965. the gasket fit the faucet well, thickness good, after installation does not leak, works properly. I recommend and greetings.
Review translated automatically
Reliable opinion
Wsk 125 1974 year fits like a glove I recommend to all who restore their old equipment I ordered some other parts and I am satisfied.
Review translated automatically
Reliable opinion
WSK 125 M06 B3, 1984. Galvanized wire grommet, looks better than in the picture from the website, hard, does not bend, solid. I recommend :)
Review translated automatically
Reliable opinion
Romet Ogar 200 r.prod 1986. the switch fits perfectly. It works as it should and looks ok, also recommend at my place it works perfectly.
Review translated automatically
Reliable opinion
Wsk m06-z2. The rubber used to make the faucet gasket is not resistant to fuel. It swelled and flew apart after just a few minutes.
Review translated automatically
Reliable opinion
WSK 125 1982. Quality of material and fit - exemplary. A little spoil the whole aesthetics of the side holes, but even this can be improved on its own.
Review translated automatically
Reliable opinion
Unfortunately, the quality of the rubber from which the gasket was made fatal. In fact, it is unusable after literally several uses of the faucet.
Review translated automatically
Reliable opinion
The splash guard has not yet been installed, the plan is to use it for the SHL Gazelle M11 for the front fender. It looks like from the era
Review translated automatically
Reliable opinion
Yamaha xj600 Diversion . The splash pad used as an option passes the test. Looks great ,the second one I put on the shelf as a decoration.
Review translated automatically
Reliable opinion
motorcycle wsk 175 kobuz from 1979 second photo wsk kobuz from 1984 fits b. well execution ok. as well as the hardness of the material
Review translated automatically
Reliable opinion
WSK 125 1982r Excellent reproduction of the original. Assembly without any problems. Material also okej - coating durable and aesthetic.
Review translated automatically
Reliable opinion
Romet 50-T-3 Rubber very good quality, installation was quick and efficient no problems. Product worth recommending
Review translated automatically
Reliable opinion
WSK M06 B3 1981. Made on the model of the original. Quality of coating and aesthetics at a high level. Installation without any problems.
Review translated automatically
Reliable opinion
WSK M06 B3 1985. Workmanship, material and aesthetics at a high level. Installation seamless - more convenient without the wheel.
Review translated automatically
Reliable opinion
WSK M06 B3 1985. Made on the model of the original. Galvanized aesthetically pleasing, the material quite rigid. Installation without any problems.
Review translated automatically
Reliable opinion
Ok, they do their job. They look nice and there is no problem putting them on. I recommend and encourage you to buy
Review translated automatically
Reliable opinion
WSK 125 M06 B3, 1984. Aesthetically made, and more importantly looks like the original. recommend.
Review translated automatically
Reliable opinion
WSK 125 M06 B3, 1984. Aesthetically made, and more importantly looks like the original. recommend.
Review translated automatically
Reliable opinion
This is the second time I used such a reduction. The first time as well as the second time it fit perfectly. I recommend!!!
Review translated automatically
Reliable opinion
Used in SHL Gazelle M17, passenger footrest rubber, good quality material, goods as described.
Review translated automatically
Reliable opinion
Mz etz 250 material good and workmanship Great nice appearance, workmanship aesthetic. I recommend!!!
Review translated automatically
Reliable opinion
Balls like balls looks like good durable stuff. I'll ride around and see if anything happens to them or not.
Review translated automatically
Reliable opinion
Komar 2350 , ogar 205 . Rubber very well made , installation went without a problem ,
Review translated automatically
Reliable opinion
The adapter made in accordance with the original. Galvanic coating very aesthetically pleasing. Assembly simple.
Review translated automatically
Reliable opinion
WSK 1982. As usual it fits without any combinations. Material and aesthetics very good.
Review translated automatically
Reliable opinion
I have a 1980 WSK 175 kobuz motorcycle. The set of bolts I purchased met my expectations, as for the appearance of the length and strength I have no reservations, I can confidently say that they are a faithful copy of the bolts of the era, a nice thing that praises each product individually packaged and described. The purchase and delivery went without any problems. Due to the fact that I still own other PRL motorcycles I will definitely be sourcing spare parts from you. Because these are already motorcycles that require quite a lot of attention and care to make them pleasing to the eye and fun to ride. I can confidently recommend the store to online customers and my friends who, like me, own such gems of Polish technical thought. Best regards and see you next time.
Review translated automatically
Reliable opinion
Of course, the goods as much as possible to fit a motorcycle which is a WSK 125. The goods in the first term I received damaged (the hole for the cable was missing), but after filing a complaint, the staff ensured that they would send the goods complete, which is a big plus on their part ( in the second term the goods arrived complete and very quickly). I have no objection to discourage the purchase of this merchandise, so I recommend it, because in case of failure of the rope it saves and helps to get home efficiently.
Review translated automatically
Reliable opinion
Moped peda but made in China 2007 year 50 capacity. The product is too weak it let go after 30 min of riding. The hole for the cable was too small I had to enlarge and besides, the broken end of the cable will always be flared and with a larger diameter so you will not do it quickly on the street. I recommend buying a new cable and not playing with replacements. Replacing the cable will do in an hour if you have never done it and the cost is 20 - 30 zl. In the picture it is made of brass and they sent a different one.
Review translated automatically
Reliable opinion
I needed the present gasket for the faucet mounted in the tank of a small soiler. I could not find it anywhere. Only on your site, in addition to a photo of the gasket and information that it fits a Junak, its dimension was given - a diameter of 17 mm. This decided me to make the purchase. The gasket fits and is OK. A small thing but very happy. It is often the case that you buy things that you need to adapt for your own needs, and then such information is essential.
Review translated automatically
Reliable opinion
Romet Ogar 200 '89, Footrests well made, I thought there would be a problem with installation due to the square hole, and thus the inability to rotate the rubber, but it is enough to tap lightly with a hammer to make the rubbers slide into place. As for the aesthetics - on the one hand you can see subtle imperfections in the casting, but they are not too conspicuous, otherwise a very good quality product.
Review translated automatically
Reliable opinion
Jawa 50 mustang 1981 / Original frame head bearings have balls with a diameter of 5mm, while these are 6mm. I think that even looking at the shape of the cup they are too large . As far as Wsk is concerned they will fit as much as possible . Very good price and as Gmoto has already accustomed me . Super fast shipping and nicely protected products . Best regards to motomaniacs
Review translated automatically
Reliable opinion
I own a WSK B3 motorcycle with a 125 engine which I modified to look like a cross thanks to GMoto company I was able to complete the restoration process of this motorcycle and I am very pleased with such fast delivery from this store I will certainly buy more than one product from this seller. Best regards and have a nice day.
Review translated automatically
Reliable opinion