Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
Suzuki TU 125
Manufacturer
Price
Sort
Options +4 
€21.54
Electric starter - 135706
Podobne:
Podobne:
strona:
from 5
Browse by manufacturer
Products reviews
These grips are super nice and completely match Suzuki's original ones, both in design and material. They are very comfortable and provide great grip, even if you hold on quite lightly, due to the special material. In my opinion, there are no other grips that fit the Suzukis so nicely. The bike is a Suzuki RF600R from 1994. The grips must be soaked in hot water or gently warmed up before installation. It's easiest to cut off the old grips with a hobby knife. Purchase and shipping was 100% fast and smooth. The picture shows the grip compared to the original.
Review translated automatically
Reliable opinion
WSK 125 75r | The frame fits in the org. holes in the rear lamp mount. I recommend, because this product is worth its price and it is practically indispensable in the mounting of the plate.
Review translated automatically
Reliable opinion
I have a Honda CLR 125 , 2002. I bought the fairing glass. I am satisfied with the goods. Good quality. Assembles quickly and without problems. It looks very impressive.
Review translated automatically
Reliable opinion
Hyosung gv125 Aquila year 2007 MF131 Oil Filter does its job,visually there is nothing to complain about it is worth the price and I recommend it.
Review translated automatically
Reliable opinion
In this price range, there is nothing to complain about. The product will do its job. It should certainly survive more than one motorcycle trip.
Review translated automatically
Reliable opinion
Kawasaki eliminator ZL 600 1998 year half 600cm windshield installation went through without a problem as it was written and so I mounted.
Review translated automatically
Reliable opinion
Glass concrete. Shipment well protected, the installation itself takes 3 minutes. The motorcycle takes on character. Yamaha XJ 600.
Review translated automatically
Reliable opinion
Professionally made instrument, a must have for every DIY enthusiast as well as a professional for the garage.
Review translated automatically
Reliable opinion
Product as described, super fit, express delivery.Regards.
Review translated automatically
Reliable opinion
I currently ride a 1999 Yamaha XJ 600N Diversion. The windshield fairing Puig Naked - heavily tinted 100% meets my expectations. Thanks to it, riding at 120 km/h is pleasant, in addition, the motorcycle has not lost its appearance. Despite the inexpensive price, the fairing is made in very good quality, with attention to detail. A huge plus is the inclusion of clear installation instructions and a number of additional mounting adapters that allow a non-technical person to install the fairing in a few minutes using only the tools necessary to remove the front lamp on the motorcycle. The product b. Good quality, at a good price, thanks to additional mounting adapters fits "like a glove" and is easy to install. The fairing significantly increases the comfort of riding.
Review translated automatically
Reliable opinion
For this kind of money, the glass performs superbly. In addition to the glass and mounting brackets, the kit includes a number of different screws needed for installation. The glass fits motorcycles with side lamp holders. Despite its rather small size, the glass shields from the wind quite well. It is known that it is not a full fairing, but it is still better than riding without anything. I rate the quality and installation instructions at 4 with a plus. It is very possible that the windshield over time will catch small scratches on its surface, but what to demand for such money. In general, the glass is worth recommending and without hesitation I would buy it again.
Review translated automatically
Reliable opinion
2002 Honda Hornet 600 The fairing was purchased to improve the appearance of the motorcycle. Significant changes in airflow I did not notice. The product is very well made. It comes with plenty of screws so that you can freely adjust the fairing. I recommend it to everyone who wants to make their equipment look more attractive. If you are looking for wind protection buy another Puig product at GMOTO! :)
Review translated automatically
Reliable opinion
A great copper washer for the oil drain bolt. Its main advantage is the right hardness. When tightening, it undergoes plastic deformation, so it perfectly fulfills its role - seals. Beware of washers made of copper alloys. Some of them are so hard that they do not yield even when hit with a hammer - they are not suitable for sealing the oil drain.
Review translated automatically
Reliable opinion
Some time ago I began to apply the principle of replacing copper washers at the time of oil change (previously I burned out). I must admit that for 1 zl it is not worth fighting with the old washer, especially since you will not get the same effect as with a new one. Now I treat the washer as a mandatory set - I always buy a set of oil + filter + drain bolt washer.
Review translated automatically
Reliable opinion
My machines WSK M06B3 72r , Jawa 350 TS,Minsk 400, I have been sourcing parts from GMOTO for some time, I recommend because of the sufficient description of products, conformity of parts with the description, fast shipping, great contact. I am passionate about extinct motorcycles (demoluds to be precise), so I require a lot from the goods and here I find it,without unnecessary fuss.
Review translated automatically
Reliable opinion
This whole set was mounted to Suzuki DR 125 SE 1996. First of all, the fit of these discs, spacers and springs is accurate and matching and when it comes to the quality of the material.the price for a set of 60zł for such a motorcycle is worth the installation only everything depends on how someone uses the clutch and with normal use it will last longer.
Review translated automatically
Reliable opinion
Hi. I am just after replacing the ordered gaskets and as always everything is in the best possible order. The product fit perfectly, really fulfilled its task, after installation there are no leaks and that is what it was all about. I highly recommend fast, efficient and, most importantly, professional as always. Best regards.
Review translated automatically
Reliable opinion
Unfortunately, the frame is made very poorly, due to carelessly cast material at the edge, the license plate does not fit and it is impossible to close the latches. It is better to spend a few zlotys more for a better quality product that will have the correct dimensions. Despite the not too bad aesthetics, I advise against the product, it does not serve its purpose.
Review translated automatically
Reliable opinion
Very good quality product. Conforms to the original mikuni carburetor that sits serially in Suzuki gn 125 1999r. The item is a perfect fit and does not require reworking or improving the factory to sit in the socket. Before buying it is worth checking what type of throttle you have because there are probably two types, but this one is 1:1 like the original
Review translated automatically
Reliable opinion
SUZUKI GZ 125 marauder 1999 The purchased piston is made very solidly, fits the original cylinder and head replacement. With the installation there were no problems rings went nicely into the grooves, the crank-piston pin also fits perfectly. The engine runs normally after the repair, with no disturbing signs.
Review translated automatically
Reliable opinion
Very good bearings. Favorable price. The quality is much better than those Chinese and other for 8 PLN. It is worth putting a few pennies for them because we have the certainty and guarantee of operation, as opposed to cheaper substitutes which once did me a lot of damage. They are not expensive and the quality is very good. I strongly recommend.
Review translated automatically
Reliable opinion
I bought a fairing for Kawasaki er5, installation very easy and well illustrated in the instructions, the fit is good, a little had to bend the parts to fit perfectly. It looks great and, most importantly, serves its purpose, at speeds of 100-140 a significant improvement in comfort and convenience.
Review translated automatically
Reliable opinion
I bought a fairing for Kawasaki er5, installation very easy and well illustrated in the instructions, the fit is good, a little had to bend the parts to fit perfectly. It looks great and, most importantly, serves its purpose, at speeds of 100-140 a significant improvement in comfort and convenience.
Review translated automatically
Reliable opinion
Suzuki Bandit GSF 650 Naked 2007(without ABS). The mirror looks great. Assembly was very easy and everything fit together. The mirror is very easy to adjust or you can set it for yourself and tighten it so no one moves it which is a big plus. I am satisfied and recommend 100%.
Review translated automatically
Reliable opinion
SUZUKI TU 125 XT ( engine from GN125). The diaphragm fits the Mikuni carburetor perfectly, all dimensions are the same as the original diaphragm. If someone has problems with adjusting the carburetor, I recommend replacing the diaphragm to be sure that it is tight. The cost is not much and the effect is immediately visible.
Review translated automatically
Reliable opinion
The purchased fairing from Puig is really of excellent quality. The included mounting kit makes it easy to fit the windshield to our naked model. My CBF 500 is now more perfect. I chose the heavily tinted color and this is how I envisioned it, it fits perfectly.
Review translated automatically
Reliable opinion
I do not recommend, it is impossible to assemble without correcting the holes of the sheet metal, the nozzle pin different cone than in the original. Only after using the part from the original seems to work properly. From this product used only the diaphragm, but also its seating differs significantly from the original
Review translated automatically
Reliable opinion
I have always dreamed of something like this. Finally I could clean the nozzles thoroughly. amol the tips are so sharp that even if you try, you can enlarge the hole in the nozzle to a given size. So not only cleans, but if you want to enlarge the holes. I recommend 100%
Review translated automatically
Reliable opinion
Regulator bought for Honda XLR 125 (97). Of course Connectors to be changed to those of the honda harness. The regulator is well made and works well. The voltage at low engine speed indicated on the meter is 14.4 volts. Good price. Durability for now I do not evaluate.
Review translated automatically
Reliable opinion
Frame very cool massive with a cool composing company logo unfortunately I did not use the purchased item because my board is smaller than I anticipated ? but the frame itself I highly recommend as I will measure the size of the board I will order another one like it
Review translated automatically
Reliable opinion
The element is made of good quality plastic, allows for repeated mounting and dismounting. The number and size of the mounting holes allows you to conveniently adjust the mounting of the element. Shape and aesthetics of workmanship at a really good level
Review translated automatically
Reliable opinion
License plate frame very solidly and aesthetically made, the size of the plate perfectly matches the size of the license plate, the mounting holes of the frame even fit into any bracket that are found at the motorcycle.
Review translated automatically
Reliable opinion
Suzuki DR 125 SE, 1998. The clutch is also a great fit for this model, so probably without a problem for all Suzuki models with this engine. Installation easy, everything fits. Very good value for money.
Review translated automatically
Reliable opinion
I bought the bolt for Bandit gsf 650 sa k6. It was a little shorter than the one previously used, but all right. In addition, the copper washer was a little wider than the bolt, but that's probably not a problem as long as nothing leaks ;)
Review translated automatically
Reliable opinion
Hyosung GA125 Cruiser 1. The bearings replace the original ball bearings without the need for additional parts. Just knock out the old scales. Fit, material quality high. Hermetically packed oiled. I recommend
Review translated automatically
Reliable opinion
Hi . I recommend this product very warmly , the quality and price is very satisfactory . Very fast shipping , and the courier package itself well protected against damage to the product . Best regards Rafal
Review translated automatically
Reliable opinion
Everything ok full professionalism and fast delivery ( everything original) plus for remembering the motorcycle on the website and selecting parts by the selected version I will definitely use this store in the future I recommend it
Review translated automatically
Reliable opinion
Honda St 1300 126 hp 80k hp 2002r , I bought the motorcycle in the commission and there standard commission frame, a little diso-polo with such a ride that's why the frame with the inscription HONDA will perfectly match the new machine ;)
Review translated automatically
Reliable opinion
BMW F 650. After regenerating the broken thread, I had to replace the plug. The purchased plug is of very good quality, precisely made, a copper gasket was attached to the plug. The product is worth recommending.
Review translated automatically
Reliable opinion
Suzuki RG 80 1998 clutch discs with spacers and springs very good quality, same very well packaged package nothing to complain about very highly recommend.
Review translated automatically
Reliable opinion