Forgot password
Order status
Free delivery from 150 euro
Manufacturer
Price
Sort
from 11
Browse by manufacturer
Products reviews
WSK M06 B3 1979. The puller made exemplary. So far it has been used for two WSK engines and has performed sensationally. This tool is indispensable in small as well as large workshops.
Review translated automatically
Reliable opinion
WSK 125 75r | The frame fits in the org. holes in the rear lamp mount. I recommend, because this product is worth its price and it is practically indispensable in the mounting of the plate.
Review translated automatically
Reliable opinion
The wrench may be minimally too long, although it depends on what motorcycle you use it for. Overall I am satisfied. In the photo SHL M11, for Romet Ogara 205 perfect.
Review translated automatically
Reliable opinion
In this price range, there is nothing to complain about. The product will do its job. It should certainly survive more than one motorcycle trip.
Review translated automatically
Reliable opinion
Pipe not bad but fragile fully shielded candle clamp only on the thread so the thread is destroyed price adekfatna to quality
Review translated automatically
Reliable opinion
For the price the pads perform great, they are well made and really brake well. I heartily recommend them.
Review translated automatically
Reliable opinion
GOOD QUALITY . HANDY ITEM . VISUALLY ALSO OK . MATERIAL FROM WHICH IT WAS MADE SEEMS
Review translated automatically
Reliable opinion
As for such a low price it is worth buying fits perfectly to Romet ogar 205 so far works well. recommend.
Review translated automatically
Reliable opinion
My motorcycle is a 1986 yamaha dt 50 mx, with the parts I order from this site I am very satisfied.
Review translated automatically
Reliable opinion
Mz etz 250 material good and workmanship Great nice appearance, workmanship aesthetic. I recommend!!!
Review translated automatically
Reliable opinion
Ignition pipe bought for a WSK 125 motorcycle, at first glance it looks perfect, a very important advantage is the covers to protect against moisture or driving in the rain. Why aesthetics "could be better", because the workmanship is good, but not refined. The important thing is that it works as it should, and I am also very satisfied with the service of the GMoto store, also recommend.
Review translated automatically
Reliable opinion
Unfortunately, the frame is made very poorly, due to carelessly cast material at the edge, the license plate does not fit and it is impossible to close the latches. It is better to spend a few zlotys more for a better quality product that will have the correct dimensions. Despite the not too bad aesthetics, I advise against the product, it does not serve its purpose.
Review translated automatically
Reliable opinion
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
Reliable opinion
Fast delivery, good quality item. 49mm Yamaha piston for DT80LC I just tried to mount it on a DT80MX 5G1, the lugs don't seem to be spaced far enough apart and they fall into the intake port. Too bad, but for 17€, just the segments, clips, axle and needle cage, it's worth it.
Review translated automatically
Reliable opinion
I own a 2008 Yamaha TZR 50 brand motorcycle the installation of the product was fabulously easy no effort required the product fulfilled its task 100% if someone is looking for an ignition pipe I recommend this model, because it is an excellent quality product. I heartily recommend and greetings.
Review translated automatically
Reliable opinion
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
Reliable opinion
Pads fit very well as the original, of course, braking well also for such a price you can confidently make a purchase and I think that the service life will not be bad, which will turn out during use I changed pads in Yamaha xt350 and fit perfectly. The product is good and very cheap. Greetings
Review translated automatically
Reliable opinion
Lambretta C125 1951 year of production. The wrench is very good, short, only with it I can reach the candle. In addition, it has hexagonal sockets cut in the handle to handle bolts and nuts in sizes often encountered. The wrench fits very much with the climate of my old scooter.
Review translated automatically
Reliable opinion
Wsk 125 gil. Trying to restore it after 20 years of sleep in garage. Had to change spark plug. Chose tool randomly; I was a bit worried, that spark plug key won' t fit cause engine head looked kind of big, but it fit just fine. Spark changed. We have ignition :).
Review translated automatically
Reliable opinion
I warmly recommend gmoto.pl store is here a lot of parts for motorcycles and mopeds parts as described and also fit motorcycles fast shipping and also fast turnaround time parts made of good solid materials.
Review translated automatically
Reliable opinion
The pipe checks out, spark ok, no puncture, especially since the vehicle lacks an ignition switch and pulling the pipe takes care of it. There were no kicks (although I know that this should not be done, but well. who is blameless let him be the first. ?
Review translated automatically
Reliable opinion
Frame very cool massive with a cool composing company logo unfortunately I did not use the purchased item because my board is smaller than I anticipated ? but the frame itself I highly recommend as I will measure the size of the board I will order another one like it
Review translated automatically
Reliable opinion
Disappointed, the bulbs are the ones I ordered but the shipping is not cheap, instead of delivering it to the shipping address they left it at a collection point and I had to go personally to pick it up, I will not recommend Gmoto to any friend.
Review translated automatically
Reliable opinion
The element is made of good quality plastic, allows for repeated mounting and dismounting. The number and size of the mounting holes allows you to conveniently adjust the mounting of the element. Shape and aesthetics of workmanship at a really good level
Review translated automatically
Reliable opinion
The indicators are very sturdy. The price is very good for this quality. The delivery time was ok. However, it is very difficult to get in touch with the seller, that would be the only thing I would have to criticize.
Review translated automatically
Reliable opinion
Romet ogar 205, 50 cm³, 1987r The wrench fits nicely with the old tools for my ogar, it's very similar to the ones from the communist era, the only downside is that it's not exactly bent and has a slight play on the spark plug itself, but other than that I recommend it
Review translated automatically
Reliable opinion
Ogar 200 This pipe the only pipe maker will really make you happy. Do you have a problem with the disappearing spark? try to replace the pipe and you will find that the spark will not escape anywhere ! quality good everything fits robukt made aesthetically and nicely.
Review translated automatically
Reliable opinion
I bought this product "in stock" , however, it looks very good. As soon as I mount it somewhere I will write what and how, but I can already see that it will be good as with the previous pipe only that straight mounted to Yamaha Majesty 125 1998 vintage.
Review translated automatically
Reliable opinion
License plate frame very solidly and aesthetically made, the size of the plate perfectly matches the size of the license plate, the mounting holes of the frame even fit into any bracket that are found at the motorcycle.
Review translated automatically
Reliable opinion
Hello, I own two 1985 M-2 motorcycles and one 1987 M-3. I am currently in the process of rebuilding each in turn. The parts I bought from Gmoto met my expectations. They were of good quality and fit without any problems.
Review translated automatically
Reliable opinion
The filter has a very cool reusable solution. It can be taken apart and blown out, which is a big plus. After several such treatments, the filter continues to be tight, no fuel leaks from it. I highly recommend
Review translated automatically
Reliable opinion
Motorcycle 50 ccm,year of production 1986 it is known not the first youth .When starting sometimes the spark disappeared.So it had to be replaced with a new one and I heard the first sounds of the long unheard of engine of my youth
Review translated automatically
Reliable opinion
Good morning, I was looking everywhere for this particular replacement, but I only found it in this store. I am very happy with the quality of the product in relation to the price. It's worth it and more.
Review translated automatically
Reliable opinion
I bought this faucet for Yamaha Drag Star Classic 650, although it is not original, the screw spacing fits, it is a little longer and has a smaller diameter of the spigot for the hose, but it fits quite well, I rate the quality of workmanship at 4.
Review translated automatically
Reliable opinion
I have been shopping with this seller for a long time and each time I am very satisfied with the quality, speed and contact with the seller. I have already recommended several offers to my friends, who are also very satisfied.
Review translated automatically
Reliable opinion
Yamaha dt 50,product well made met my expectations I am satisfied both with the product and the fast delivery fast and easy installation visible light plastic hard and durable worthy of attention I recommend
Review translated automatically
Reliable opinion
Honda St 1300 126 hp 80k hp 2002r , I bought the motorcycle in the commission and there standard commission frame, a little diso-polo with such a ride that's why the frame with the inscription HONDA will perfectly match the new machine ;)
Review translated automatically
Reliable opinion
Ogar 205 pon 50 cm year 1987.Product of good quality, the shape resembles the original which is a plus, the way of assembly is trivially simple.Product 100% consistent with the seller's description.Price revelation.I recommend
Review translated automatically
Reliable opinion
Pipe for its price is I think a very good product qualitatively and aesthetically, there is no need to look for other ignition pipes for 20/30 PLN pipe price 5zł is really impressive :) I recommend
Review translated automatically
Reliable opinion
Parts purchased from gmoto store perform very well I am also happy with it I am also happy with the catalog that gmoto website provides because they have a very large selection and ideal prices.
Review translated automatically
Reliable opinion
We have Motorcycle parts to Yamaha DT 80
- Yamaha DT 80 LC II 1986
- Yamaha DT 80 LC II 1988
- Yamaha DT 80 LC II 1989
- Yamaha DT 80 LC II 1991
- Yamaha DT 80 LC II 1993
- Yamaha DT 80 LC II 1994
- Yamaha DT 80 LC II 1995
- Yamaha DT 80 LC II 1996
- Yamaha DT 80 LC II 1997
- Yamaha DT 80 MX 1983
- Yamaha DT 80 MX 1984
- Yamaha DT 80 MXS 1984
- Yamaha DT 80 MXS 1985
- Yamaha DT 80 LC I 1983
- Yamaha DT 80 LC I 1984
- Yamaha DT 80 LC II 1985
- Yamaha DT 80 LC II 1987
- Yamaha DT 80 LC II 1990
- Yamaha DT 80 LC II 1992
- Yamaha DT 80 MX 1981
- Yamaha DT 80 MX 1982
- Yamaha DT 80 MXS 1983
- Yamaha DT 80 MXS 1986
- Yamaha DT 80 1987
- Yamaha DT 80 1981
- Yamaha DT 80 1982
- Yamaha DT 80 1985
- Yamaha DT 80 1986
- Yamaha DT 80 1988
- Yamaha DT 80 1989
- Yamaha DT 80 1990
- Yamaha DT 80 1991
- Yamaha DT 80 1992
- Yamaha DT 80 1984
- Yamaha DT 80 1983