Motorcycle suspension - Front
Honda CB 250

2020-02-25, 22:28

View original

Johan

Used for Honda FT 500 1983. Fitted within the hour (after disassembly & preparation = removal of old bearings). Have used 50 mm pvc pipe to drive bottom cup in; tightness of fit was as it should be. Did not use the supplied washer but made my own of 30x36x3 mm so the original rubber seal could sit below the (inner part of) the bearing. Re-used the original bottom washer (0.8 mm thick) to shield the seal. The (upper) adjustment nut also carries a thin shield. I had to grind the spigot (for the shield, on the nut) to a chamfer, as it just touched the radius of the upper bearing inner ring. On the 3rd picture, where the shield lies under the nut: red arrows = grind inner dia of spigot, shield fits at outer dia (on top as depicted). Ordered a 2nd set for my Honda XBR 500.

Review translated automatically

Reliable opinion

2018-08-21, 16:25

View original

Jakub

Honda CX 500 version CUSTOM year 1983 oil seals in perfect size. The dust seals sit tight on the shins and do their job in preventing dirt from getting in. Quality of materials very good, there was no problem with installation.

Review translated automatically

Reliable opinion

2022-07-07, 06:20

View original

Wiesław

Honda CB400N 1982.Workmanship of the seals very good. Installation without any problems. After driving about 400 km. after installation no leaks of any kind. I recommend

Review translated automatically

Reliable opinion

2024-10-08, 18:26

View original

Babisf

Front suspension seals. Fitted my KE125 that was leaking. Dimensions and product as shown in the description.

Review translated automatically

Reliable opinion

2020-03-30, 20:41

View original

Michał

Sealers without complaint. In a rigid and secure package a set of sealers and covers for two leaguers. Assembly trivially easy (for those who like and have an idea of DIY and small repairs). The fit is perfect. So far zero problem and the lags work perfectly in combination with Motul 10W oil.

Review translated automatically

Reliable opinion

2020-07-08, 19:23

View original

Waldemar

My machine is an 86 Honda Shadow VT 1100 . Purchased parts were not dedicated for this vintage , so as a novice user I bought blind and surprisingly they fit . Installation was no problem and the material and workmanship flawless . G Moto and product on pistket . LWG .

Review translated automatically

Reliable opinion

2021-08-24, 09:31

View original

Sebastian

Sealers bought for Junak 123 (2015). The size identical appears on the original ones I changed. They fit perfectly and do their job (driven 1 kkm after replacement; I poured 150 ml of 10W lag oil into each lag).

Review translated automatically

Reliable opinion

2017-11-17, 07:02

View original

Jakub

We fitted the bearings to a 2004 Honda Hornet pc36. The installation went smoothly and the bearings seem indestructible ;) Well, but this is Mc International after all, the top shelf among parts for Japanese ;)

Review translated automatically

Reliable opinion

2025-05-08, 01:24

View original

Slobodan

Everything went very well, thank you I often buy from Gmoto without any problems. The shipping takes a little longer to Austria, that's the only problem. The prices are often cheaper than other sellers.

Review translated automatically

Reliable opinion

2019-04-12, 07:04

View original

Rafal

I own a motorcycle Daelim Daystar vl 125 prod. year 2006 . Lag seals from ATHENA was a successful purchase because they eliminated leakage from the shock absorbers. Easy and quick installation.P olecam.

Review translated automatically

Reliable opinion

2025-09-02, 18:25

View original

Tomáš

The above set of seals for front forks Honda Deauville NT 700 V, r.v. 2008 absolutely fine, trouble-free assembly, the product suits the type of moto, appears to be of good quality.

Review translated automatically

Reliable opinion

2025-07-16, 06:39

View original

Alexander

Easy to order, fast delivery. Fits exactly. I fitted the oil seals straight away and passed the TÜV. Would buy them from G-Moto again next time.

Review translated automatically

Reliable opinion

2025-04-30, 17:05

View original

Thomas

Bought to replace the original honda bearings, very good quality, fitted just right for the Hornet, very good price. Fast shipping, I recommend.

Review translated automatically

Reliable opinion

2024-05-03, 07:48

View original

Bogusław

Great sealers, they fit nice and tight even though the lag was polished, so far only about 100km after replacement but no drop on the lag, I recommend

Review translated automatically

Reliable opinion

2019-08-26, 12:15

View original

Sławomir

I own a Honda NT650V Deauville. The seals seem solid because of the 2 spring rings. The previous ones only had one such ring.

Review translated automatically

Reliable opinion

2023-06-26, 15:34

View original

Przemysław

Professional approach to the customer, assistance at every stage and reliable. Express service, quality at the highest level, great and close-knit team.

Review translated automatically

Reliable opinion

2022-04-24, 13:31

View original

Krystian

Motorcycle enduro Beta RR 50 delivery went smoothly Sealers easy to install and despite riding on heavy terrain do not let go I recommend highly.

Review translated automatically

Reliable opinion

2025-10-14, 11:40

View original

salmon Sébastien

The equipment is exactly as described. Very good value for money. Delivery was very fast. Site to recommend

Review translated automatically

Reliable opinion

2017-07-07, 10:12

View original

Slabdoor

Zumico GR500 It's a pity that in the picture there are still dust seals but otherwise ok After all, for such a price they must meet my requirements

Review translated automatically

Reliable opinion

2023-05-24, 07:13

View original

Remi

Sealers well made, there was no problem with the installation which indicates well-behaved parameters. Tight, oil no longer leaks.

Review translated automatically

Reliable opinion

2020-02-11, 17:50

View original

Piotr

Sealers very good quality not some cheap plastic. There are 2 springs on each sealer. Fast shipping. Recommended.

Review translated automatically

Reliable opinion

2025-05-13, 07:11

View original

Kenn

Fit perfectly which I also expected. Would definitely recommend others to order. Relatively fast shipping, but ok

Review translated automatically

Reliable opinion

2023-07-29, 07:17

View original

Sika

Product of good quality as always fast shipping art.I installed in Honda CB 750 Steven fifty degree of difficulty of installation 2/5 I recommend

Review translated automatically

Reliable opinion

2018-10-23, 18:45

View original

Karol

I own a 2004 Yamahe dt 50 r.The product made very well easy to install.The product did its job as much as possible.

Review translated automatically

Reliable opinion

2025-01-15, 05:37

View original

Ondrej

Bearings to the shock absorbers beautifully for the fit it works and the shock absorbers move beautifully fit there without any no its a problem for me good

Review translated automatically

Reliable opinion

2024-06-22, 08:03

View original

Rafał

The seals fit suzuki gsx600f. Finally stopped leaking from the suspension and its operation improved significantly. I recommend

Review translated automatically

Reliable opinion

2025-01-12, 17:44

View original

Barlet

Perfect for my 2004 Hornet. They fit perfectly, good quality for a decent price. Perfect shipping.

Review translated automatically

Reliable opinion

2024-09-11, 14:40

View original

Marcin

Very good quality workmanship fit perfectly to the lags 2 sets mounted on Moto and miles fly nothing leaks.

Review translated automatically

Reliable opinion

2020-04-05, 11:54

View original

Tomasz

Honda nt650v deauville 1999. The set of shock seals fit perfectly, the installation was done without any problems.

Review translated automatically

Reliable opinion

2018-02-03, 13:44

View original

Filip

Honda cbr125r year 2004 . The seals fit perfectly, they are well made, I have no complaints about them ;)

Review translated automatically

Reliable opinion

2022-08-02, 22:26

View original

Andrzej

I own a motorcycle brand: Honda CB 500F 2013 material was well packed, fit and complete.

Review translated automatically

Reliable opinion

2024-01-08, 12:55

View original

Krzysztof

Complies with the description. Very well made and fit perfectly. Shipping very fast. I recommend these bearings to everyone.

Review translated automatically

Reliable opinion

2020-04-05, 08:45

View original

Tomasz

Honda NSR 125 2002.Solid quality workmanship after installation nothing leaks everything holds well. I recommend!

Review translated automatically

Reliable opinion

2025-05-25, 15:12

View original

Silvio

I liked it. You were great and the fit was perfect. They were very difficult to get in but no problem

Review translated automatically

Reliable opinion

2024-05-02, 15:54

View original

Adrian

Product of very good quality, fit very good, fit the motorcycle for which it was recommended.

Review translated automatically

Reliable opinion

2022-04-09, 10:24

View original

Irek

Product of very good quality, meets my expectations. No need to buy more expensive sealers.

Review translated automatically

Reliable opinion

2023-06-30, 12:51

View original

Rafał

Recommended. The product is consistent with the photo. Carefully packed in foil, you can see that no one rummaged at it.

Review translated automatically

Reliable opinion

2020-04-17, 17:42

View original

Michał

Hyosung gt 125 on telescopes (not upside down) from 2006 fits perfectly and finally the lags do not leak.

Review translated automatically

Reliable opinion

2017-04-17, 10:05

View original

Kamil

Sealers very good quality athena,I installed in MOTORHISZPANI rx50,highly recommend

Review translated automatically

Reliable opinion

2025-10-14, 07:32

View original

Miroslav

Fast delivery. I haven't installed them yet, but the product looks good quality!

Review translated automatically

Reliable opinion