Manufacturer
Price
Sort
Rozmiar:
Products reviews
2018-07-07, 21:46
Krzysztof
Ogar 200 from 88 - bushings go into the shock absorber , but there is no way to insert the lower lag , or after installation the suspension does not have the ability to work. The bushings are very hard - getting them to the right size was not a simple matter , but maybe this will make them last a little :) My suspension had fatal clearances , after replacement everything returned to normal , but I would not want to do it a second time without access to a lathe .
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-11-23, 10:51
Krzysztof
Good prices, some products available only here. I bought rubber shock covers - they fit bicycle shock absorbers. The originals are not produced, so this is the only place to get such a thing at normal money. The quality does not knock, but for the price it is as OK as possible. I recommend!
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-12-15, 14:44
Czesław
KOMAR - I bought for a mosquito, the dimensions match the original ones I removed. A big plus for GMOTO for the well-stated dimensions in the item description - as if I had suggested only the name of the type of bushings for the mosquito, they would not fit my equipment.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-15, 02:45
Tomasz
The quality of the plastic and the workmanship itself is very good. Unfortunately, but the bushings are kind of oversized and to install them you need to fit them to the lags. I sanded them from the inside with a multi-sander. Pi fitting is very good. Assembly of Ogar 200
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-14, 20:56
Marek
As the name suggests: delux. The rubbers complete the image of the front suspension of the Mosquito, they fit perfectly, look beautiful, are of very good quality, optimally flexible. In a word: perfect. I highly recommend
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-12-14, 08:27
Adam
The bushings before being scooped into the fork fit nicely after scooping it was no longer so good you need to keep this in mind preferably after powder coating the fork clean the bushing area to bare metal then there will be no problem.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-01-03, 11:50
Krystian
I own a Komar 2350 from 74r with s38 2 gear engine . Axle fits perfectly but it is a pity ze bearings for it are in a separate auction you have to search a little. The solution is better than the old garlands. I recommend.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-03-01, 15:41
Paweł
Worthless product. The place of bearing seating- the middle part of the axle has a smaller diameter( 9mm) than the thread ( 10mm). The bearing after installation has a play on the axle of 1 mm.I advise against the purchase of this product
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-02-23, 21:07
Greg92PL
Romet Ogar 200, does not fit. Too tight need to saw with a file to make the suspension work. Lack of flange causes the bushing to move "up" the telescope
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion