Clutch baskets

2024-09-25, 18:26

View original

Kamil

I recommend, the installation went smoothly and smoothly , it fit my motorcycle perfectly. I recommend to point the mounting screws so that they do not unscrew. Below I add a photo of the basket after about 200mth.

Reliable opinion

2024-08-03, 06:21

View original

Jakub

The basket seems to be slightly lighter than the original, whether this is bad or good is not for me to judge, since the replacement I have not had any problems with it. The serrated hole in the middle fits snugly, I had to convince the basket with a rubber hammer to go into place, on the other hand there is no play (xD). Since this procedure it goes in and out smoothly, so it's not that it's impossible to remove it later (although it's possible that it's the fault of some mess in my clutch). The piece is carefully made, with no cavities or damage. I recommend

Reliable opinion

2024-08-12, 10:22

View original

Tobiasz

Fits perfectly on the MRF 80 Runner as a replacement for the original. Included everything needed for installation - flat washer, lock washer and nut. Replacement solved the problem of slipping when firing on cold and pulling when starting on the pressed lever from high revs. Recommended!

Reliable opinion

2024-01-11, 23:12

View original

Adamsky73

Dimensionally all ok, the material also seems solid. It would be better if the contact surface with the discs was raw. WSK has already ridden a little and everything works as it should. In the spring a more thorough inspection.

Reliable opinion

2024-09-29, 08:00

View original

Dawid

Clutch basket Romet good is the quality of workmanship well done clutch basket not zawony and new thank you gmoto.pl for parts for romet ogar 205 and I recommend gmoto.pl this site because parts som new

Reliable opinion