Forgot password
Order status
Free delivery from 150 euro
Electrical installations - motorcycle wiring harnesses - Page 3
Browse Electrical installations - motorcycle wiring harnesses - Page 3 by manufacturer
Products reviews
Kinroad xt 50q - with the installation I am satisfied , but it has one small drawback, it fits only the model with one meter. Everything else fits. The pictures show the cube that is missing.
Review translated automatically
Reliable opinion
The product itself I evaluate positively, the cables fit the Ogar 205 model perfectly. The plugs are of good quality, the length of the wires is appropriate. Included is a very helpful drawing showing the locations and how to connect the cables. The price is quite high for a few cables, but you won't find a lower one on the market (unless someone buys the cables separately and tries to put the whole thing together, which is a bit time-consuming and misses the point). I encourage you to buy a new installation, the old wires that are several decades old are sometimes cracked and snotty, the new installation in my Romet has improved the efficiency of the entire electrical system and good conduction of electricity. Before replacing it, I recommend buying plastic pullers (allow you to fix the wires to the frame above the engine) and heat shrink covers (but this is cosmetic). Romet Ogar 205, model year 1987
Review translated automatically
Reliable opinion
I purchased this installation, in order to carry out the renovation of my Komar, in which the installation was severely decomposed, and the art of it would trump wirework. Also, for a really small amount, in this store, you can buy a complete installation, which is a faithful reproduction of the factory installation, with the difference that it is made of modern, quality materials. Thus, the factory installation can be reproduced, and the Mosquito will be able to return to traffic in small steps. The store's stock is so huge that you can practically buy any missing part, for the purpose of restoration. I highly recommend for professionals as well as amateurs, or for those taking their first steps in restoring a vintage.
Review translated automatically
Reliable opinion
This installation is some kind of farce.the wires from the stop sensors too short, the only thing that matched was the entire rear with directions. I'll give a plus for the fact that there is an additional wiring to the ignition, in fact, I do not know why, ignoring the colors compared to the original installation, because everyone can guess and connect according to themselves. The manual itself, too, is a piece of cake, in fact, I do not know why it is there, it is the usual platinum connection to 6V. Those who have the usual platinum sim will be satisfied.
Review translated automatically
Reliable opinion
I bought an electrical harness for Romet Ogar 205 and I must say that I am satisfied. The product is a good fit for my moped, so the installation went fairly quickly, even though I am not a professional mechanic I was helped by the instructions which were well described and easy to understand. The wires are solid and the insulation seems durable, which is important because I use my moped in different weather conditions it is of very good quality
Review translated automatically
Reliable opinion
WSK 125 Kos 79' from my grandfather's barn Thanks to the parts (including this one) purchased from Gmoto, I was able to breathe a second life into this motorcycle. Feel the spirit of communist Poland, the wind in your hair and flies in your teeth.besides, it's a good investment in the future. Each part carefully packaged, in good quality and fits like the original. Regards, Arek PS. I recommend buying while someone is still producing it!
Review translated automatically
Reliable opinion
romet ogar 200 1986 unfortunately disappointment I thought that the visage will be complete for the whole motorcycle but there are 2 wires missing too that the installation should be slightly reworked the workmanship of the installation is not accurate after all it is good and it is worth to buy it and to put it on if someone is not afraid of small works
Review translated automatically
Reliable opinion
Purchased electrical system and the diagram included in it perfectly fits Simson S51 . We can connect everything ourselves and do not look on the Internet for the diagram we need to connect the installation in the motorcycle . The diagram is clear so no one has to think how to do it .
Review translated automatically
Reliable opinion
ROMET OGAR 200 capacity 60ccm, year 1989. good workmanship, careful termination of wires, and the diagram that the store adds is very helpful despite the fact that on the Internet there are plenty of it, but this one is better readable, I recommend to everyone here this product ;) really careful workmanship ;)
Review translated automatically
Reliable opinion
Romet Ogar 205 50ccm 1988r I rate the quality as a five, but as for the fit there is something to complain about, namely from the engine there are cables that come out of the engine that have female plugs and in the cables should be male and they are female. The second problem is that the yellow cable that leads to the rear lamp is too short.
Review translated automatically
Reliable opinion
Romet Ogar 200 year unknown, overall the installation case looks good, the diagram is clear and as simple as possible, so anyone should be able to cope with it, shipping in about 2 days, due to the fact that I ordered a couple of other parts. I am satisfied with the purchased product.
Review translated automatically
Reliable opinion
The installation harness has female pins at the engine output. I have no idea if someone is so ill-informed or simply the offered harness is pure Chinese. It takes modifications to make it fit the moped. Other than that, the quality and aesthetics of workmanship on 5
Review translated automatically
Reliable opinion
Ogar 200, 1985. The old installation made by me (I'm an electronics engineer so wires and soldering iron with tin are no strangers to me) was good but I wanted a finished and new one. The diameter of the wires in the new one is thicker and what makes it stronger for abrasion etc. I highly recommend.
Review translated automatically
Reliable opinion
The product conforms to the original to this included installation instructions (diagram) to connect so simple and clear that I think even a person who has not dealt with it can cope with it, the only condition for proper connection is knowledge of colors.
Review translated automatically
Reliable opinion
The harness can be.Connection(lamp signal light switch)colors other than factory at least in my mosquito(mosquito 4),could be added terminals(male and female),added short wires I do not know for what(maybe for other models?)which I will not use
Review translated automatically
Reliable opinion
I honestly did not expect this installation to be of such good quality! The cables look good and are sturdy, really very well insulated. Also a plus is the insulation on the "plugs" and the diagram we get in the kit. Everything fits as it should.
Review translated automatically
Reliable opinion
Installation as described. Fits my Zumico Aion scooter. With disassembly there is no problem. Just a moment to see what is 5. Also, it remains only to properly connect the plugs with which there is also no problem. It is impossible to confuse each plug is different.
Review translated automatically
Reliable opinion
The harness is well done but there are a few wires missing from the ignition module to the ignition and from the module to the high voltage coil. The wiring diagram would be good if you could see where the white and gray wires go-not visible against the white sheet.
Review translated automatically
Reliable opinion
A 1984 WSK 125, this is another of very many purchases from GMoto. This product and others are of good quality and meet the standards for rebuilding and restoring old motorcycles. Based on parts from g.moto I have already rebuilt a 1976 Kobuz 175. I recommend
Review translated automatically
Reliable opinion
Wsk b3 last release with ignition as from charta. The ground wire is missing, which in the original wiring went from the ignition to the tail lamp and was screwed under the seat. One has to search on the force now for some ground to the ignition and tail lamp.
Review translated automatically
Reliable opinion
Quad 110 ATV, the quality of the installation very good connection without major problems (I had to make a small adjustment). I'm still waiting to replace the installation in the ATV 125 and a better one I'm sure I won't find. I highly recommend! Store No.1
Review translated automatically
Reliable opinion
Romet motorcycle, installation harness Cable length and colors, everything is like the original Conducts electricity well Works very well, and the instructions pinned to the installation helps a lot in installation I recommend:)
Review translated automatically
Reliable opinion
I own a Romet Ogar 200 with a Czech jawa engine with a capacity of 50 cm3. The product made really very well fits everything, I recommend anyone who has an ogar and some old harness to exchange to this one.
Review translated automatically
Reliable opinion
The harness very aesthetically made, all ends terminated as in the original. For the money, it is not worth playing with building a harness from scratch. The diagram included in the kit is very helpful for installation.
Review translated automatically
Reliable opinion
Electric motorcycle wiring harness is perfectly matched, wires of the right thickness with length. Assembly takes a moment. Included color scheme in accordance with the colors of the cables. I recommend buying it. It will serve many years
Review translated automatically
Reliable opinion
Romet Ogar 205; 1988r; 50 cm3. The harness of good quality thick wires, not made in china. Only the connectors in the wires, to connect with the wires protruding from the engine are female, the same as in the engine.
Review translated automatically
Reliable opinion
Installation in general in order but the wires to the light resistor are missing. In addition, the wires in the ignition and voltage regulator cubes were swapped places so you need to pay attention to this when installing.
Review translated automatically
Reliable opinion
INSTALLATION IN THIS FORM IS SUITABLE ONLY FOR 2T SCOOTERS. IN THE DESCRIPTION WAS TO FIT, AMONG OTHERS. THE DESCRIPTION WAS SUPPOSED TO FIT, INTER ALIA, TO THE OWL 4T. IT IS NECESSARY TO CHANGE THE ENDS OF THE MODULE, SPARK PLUG AND COIL CANDLE.GREETINGS PIOTR
Review translated automatically
Reliable opinion
not very good. all joints are just twisted and then taped. connector pins not clamped properly, only held in wire. had to redo the whole thing in order to use it.
Review translated automatically
Reliable opinion
A quick listing of new cables. You disconnect the old ones attach the new ones. Fitted and of good quality. We managed with ease. Without the help of a mechanic.
Review translated automatically
Reliable opinion
All OK. Good quality and fast delivery. No defects. Cooperation and purchases on Gmoto were without problems. Will be installed on Kinroad XT50Q.
Review translated automatically
Reliable opinion
Installation git well done. The only problem is a few cables are different. Now just looking for a schematic :D By the way, I recommend it :)
Review translated automatically
Reliable opinion
workmanship , appearance good, there could still be some description of the plugs what to connect to them.Overall rating scale Good.I recommend the product.users.
Review translated automatically
Reliable opinion
The installation in general is well orchestrated,only the quality of workmanship could have been better,but there is no surprise in the end it is for Chinese.
Review translated automatically
Reliable opinion
Zumico Guowei 50cc 4t. The harness is much better done than the original. No loose wires in the cubes. Very good quality
Review translated automatically
Reliable opinion
The product 100% as described. Very good quality of workmanship. Package secured perfectly. I recommend to everyone.
Review translated automatically
Reliable opinion
Everything as described,goods well packaged and good quality,fast delivery,I recommend this store
Review translated automatically
Reliable opinion