Forgot password
Order status
Returns up to 14 days
Manufacturer
Price
Sort
€31.78
Lowest price from 30 days before discount: €31.78
Fork and dust seal kit All Balls - 56-168-A
Browse by manufacturer
Products reviews
Ogar 200 from 88 - bushings go into the shock absorber , but there is no way to insert the lower lag , or after installation the suspension does not have the ability to work. The bushings are very hard - getting them to the right size was not a simple matter , but maybe this will make them last a little :) My suspension had fatal clearances , after replacement everything returned to normal , but I would not want to do it a second time without access to a lathe .
Reliable opinion
Honda Hornet 600 pc34 from 2001, they fit perfectly to the lags of the motorcycle, quality of workmanship at a high level, the rubber is not old and holds very well, the sealers and anti-dust themselves come in a box, in which there are nicely separately sealer and anti-dust, in addition, the timing of implementation, shipping and delivery at a fast level, as highly recommend :)
Reliable opinion
The quality of the plastic and the workmanship itself is very good. Unfortunately, but the bushings are kind of oversized and to install them you need to fit them to the lags. I sanded them from the inside with a multi-sander. Pi fitting is very good. Assembly of Ogar 200
Reliable opinion
Romet Ogar 200, does not fit. Too tight need to saw with a file to make the suspension work. Lack of flange causes the bushing to move "up" the telescope
Reliable opinion
Ogar 2000/1988. The bushings are made of good material, but the outside and inside diameters had to be matched on a lathe and not everyone has access to a lathe.
Reliable opinion
Romet Ogar 200. product as fit as possible, good quality for a good price. I replaced the bushings with new ones in no time. Everything is playing at 102.
Reliable opinion
Everything according to the description and with the photo, fits like the original. Fast and hassle-free delivery, I am very satisfied .
Reliable opinion
Romet Ogar 200 1988 Similar situation as with the bushing with a flange. It is mandatory to roll the bushing before installation
Reliable opinion
Very good product now the suspension no longer has play it flexes and works like new I highly recommend this product.
Reliable opinion
The workmanship as well as the reproduction to the original is ok. Fits as much as possible to the fork. (Romet Ogar 200 50cm3).
Reliable opinion
Bushing too tight as outside as inside, need to roll li fit. The material itself good.
Reliable opinion
It does not fit a narrow fork. Need to look at the dimensions before buying. Quality ok
Reliable opinion
I am satisfied with the product, Item well made, everything works beautifully
Reliable opinion
Motorcycle TOO tight needs to be redone.
Reliable opinion