Forgot password
Order status
Free delivery from 150 euro
Motorcycle brakes - Page 14
Manufacturer
Price
Sort
€11.62
Brake hose - 75240
€5.23
KOS brake shoes - 74906
€3.68
PY-5 brake rod - 74475
Options +2 
€6.83
Brake hose 900mm - 74105
€4.30
Jaw spreader - 63512
€19.40
PY-5 brake caliper - 63421
from 318
Browse Motorcycle brakes - Page 14 by manufacturer
Products reviews
I own a 3+1 quad with a capacity of 110cm from the year 2003. The products that I ordered were the left ATV brake master cylinder, the installation of which was very fast and efficient. High quality product without any defects. To install it, all I had to do was unscrew only two screws and connect to the pressure brake hose. It was also necessary to pour brake fluid into the master cylinder reservoir and bleed the brake system. The master cylinder also has a stop sensor, from which there are two outputs for hooking up to the system.
Review translated automatically
Reliable opinion
I am refurbishing my ETZ 150, yesterday I got this master cylinder, after connecting it, it works very smoothly,it can lock the wheel hard, so the braking power is at a high level. Beautiful black paint fits just right for my machine.
Review translated automatically
Reliable opinion
Yamaha XT125r from 2010r. There were no problems with the installation of the tank, only the hose was a little too long, I shortened it and it is great. The tank seems to be solid for the price. I am satisfied, regards ;)
Review translated automatically
Reliable opinion
Zumico gr 500 engine rearranged from a 125cc cross, master cylinder with installation went fast and everything is okey. I have owned the motorcycle for more than 7 years everything done on time and with heart
Review translated automatically
Reliable opinion
Router scooter The installation went extremely fast and smoothly. Although it was difficult to pull off the old pads but the big problem was not I am satisfied Works OK
Review translated automatically
Reliable opinion
I bought the pads for Romet ADV 150, year 2016. Product quality good, made decently, fit perfectly. I recommend the price/quality in a very good ratio!
Review translated automatically
Reliable opinion
Super quality and fast shipping to the Czech Republic, for me the best deal. Thank you, so far great satisfaction ? the brake brakes and holds as it should. I can only recommend.
Review translated automatically
Reliable opinion
Brake pads super. I also find the workmanship quality very good. They fit my 300cc quad. I have also attached review photos; Greetings
Review translated automatically
Reliable opinion
Assembly very simple well packaged solidly made everything works perfectly pads free and I had a pattern for the second caliper
Review translated automatically
Reliable opinion
The quad bashan 150 fits perfectly , the installation was quick , the shipment arrived very quickly without any damage .
Review translated automatically
Reliable opinion
I got an yamaha xt350 of 1991. I am very glad with this item. Very good quality / price. Recomend it.
Review translated automatically
Reliable opinion
I own a 150ccm quad, Chinese. The caliper fits perfectly, it is identical to the one put on from the factory.
Review translated automatically
Reliable opinion
Unfortunately, the acquired brake caliper is a string of constant problems. The original caliper for the Romet Ogar 900 attaches with two M 8 flange bolts with a standard thread pitch. The supplied caliper has screw slots reamed to dimension 10, and additionally threaded exactly the same as the brake line screw, i.e. M10/1.1 . (i.e. a very tight thread) Of course, it would not be a problem if the caliper was supplied not only with a screw for the brake fluid line, but together with the mounting screws (only a slight drilling of the holes on the right fork shank would remain. I've been looking for matching bolts for over a week now, unfortunately they are out-of-catalog and as a result I'm not even able to check how the caliper works (and, by the way, how the master cylinder I acquired at the same time works).
Review translated automatically
Reliable opinion
I own a 3+1 quad with a capacity of 110cm from the year 2003. The products that I ordered were the left ATV brake master cylinder, the installation of which was very fast and efficient. High quality product without any defects. To install it, all I had to do was unscrew only two screws and connect to the pressure brake hose. It was also necessary to pour brake fluid into the master cylinder reservoir and bleed the brake system. The master cylinder also has a stop sensor, from which there are two outputs for hooking up to the system.
Review translated automatically
Reliable opinion
I own a 3+1 quad with a capacity of 110cm from the year 2003. The products that I ordered were the left ATV brake master cylinder, the installation of which was very fast and efficient. High quality product without any defects. To install it, all I had to do was unscrew only two screws and connect to the pressure brake hose. It was also necessary to pour brake fluid into the master cylinder reservoir and bleed the brake system. The master cylinder also has a stop sensor, from which there are two outputs for hooking up to the system.
Review translated automatically
Reliable opinion
I own a 3+1 quad with a capacity of 110cm from the year 2003. The products that I ordered were the left ATV brake master cylinder, the installation of which was very fast and efficient. High quality product without any defects. To install it, all I had to do was unscrew only two screws and connect to the pressure brake hose. It was also necessary to pour brake fluid into the master cylinder reservoir and bleed the brake system. The master cylinder also has a stop sensor, from which there are two outputs for hooking up to the system.
Review translated automatically
Reliable opinion
Shopping at Gmoto is a pleasure. I previously bought from another vendor where I waited up to 2 weeks for delivery. I had to callely remind myself so they would ship at all. At Gmoto shipments arrive very quickly, they are very well packaged, and more importantly the price. The prices are low, the quality of the products is high. I highly recommend buying on Gmoto without wondering if this company is good. You order after two or three days the courier knocks on the door.
Review translated automatically
Reliable opinion
MZ ETZ 250 1983. The aesthetics of the workmanship itself is not questionable, and there would be nothing to complain about if it were not for the fact that the hole for the spreader has a diameter far too large, which, in my opinion, makes the part unsuitable for installation in a motorcycle. Even with the maximum tightening of the screw nut, which is designed to clamp on the spreader shaft, the lever is too loose, which will result in cutting the cutter after a short time of use.
Review translated automatically
Reliable opinion
Suzuki Freewind XF650 1998. Replacement of the original rubber cable with a steel braided one, purchased on Gmoto, went smoothly and took half an hour. The new cable makes it much easier to dispense locking force, which translates into increased safety. I definitely recommend such a replacement. Especially since the cost of the whole "fun" did not exceed 50 PLN.
Review translated automatically
Reliable opinion
Disappointing quality! Brake light switch could not be screwed in because both threads of the brake lever mount and the switch are uncleanly processed, had to order a new switch, pressure bolt to the brake cylinder was not properly mounted! All together for a safety component an absolute NO-GO!
Review translated automatically
Reliable opinion
Hi, not long ago I bought these pads for my mrf 140 rc due to the fact that my orginal ones have reached the end of their life. I have been riding on them for about two weeks and so far they brake very nicely. The wheel stops without a problem they don't wear out as fast as the previous ones. And one of their big advantages is the price is really low. I recommend.
Review translated automatically
Reliable opinion
Aprilia rs 50 I bought the pump and for the first month all good but now the pump from the bottom began to leak slightly and on the lever rubbed off the black material. In general as for the operation I have nothing to complain because the brake razor blade only according to me it should not leak after a month. Greetings
Review translated automatically
Reliable opinion
Brake pads purchased for motorcycle sachs ZZ 125.They fit perfectly in 100% match the description.Made with high accuracy, covered with varnish which in combination with such an attractive price will certainly satisfy any motorcyclist who takes into account the quality/price ratio.Greetings and recommend Bartek
Review translated automatically
Reliable opinion
I own a quad atv with a power of 250 . Pads made of very good material, probably with an admixture of copper, they are very durable do not peel off quickly like the rest of the "hardened" pads ;) I recommend, I will definitely use this company when buying more parts for my quad ;))))
Review translated automatically
Reliable opinion
I ordered the brake pads and fitted them. Unfortunately, I found that the inner brake pad was a bit too thick and pressed the brake caliper bracket into the brake disk. After a bit of grinding, however, everything works as it should.
Review translated automatically
Reliable opinion
I purchased for Junak 121 (year of manufacture 2011) and it fits perfectly, works flawlessly. Installation carried out independently, without problems. The quality of the product seems to be very good (I use only 2 weeks). Aesthetics of the product at a good level.
Review translated automatically
Reliable opinion
Very super parts very solid company within two days I received the package completely undamaged there are not many companies like this one they have good parts and they are not expensive I would recommend it to all my friends who have scooters thank you and best regards
Review translated automatically
Reliable opinion
Hello I have a zipp vz1 year 2015 pads fit but there is a problem with installation because the metal base is thin from the original and it barely holds on to the guide of course over time as the pad wipes it will hold better
Review translated automatically
Reliable opinion
The rear brake pads are a super product because of the elegant workmanship. It holds together and I think it can serve me for a long time. I will definitely be ordering more from the store for various parts because of the large selection and super workmanship.
Review translated automatically
Reliable opinion
Quad 150 Chinese 2005. I searched everywhere for the caliper , but could not find. Until I went to the site gmoto where I found ! Clamp fits like a glove, installation is quick because 2 screws turn and after the matter. I recommend
Review translated automatically
Reliable opinion
I bought the cable with the application to the front brake on a 1995 BMW F650. It fits perfectly. Braking power and efficiency without comparison with ordinary rubber cable. Workmanship at a very high level.
Review translated automatically
Reliable opinion
yamaha xt 600 3TB 1994 YEAR FRONT BRAKE original length is 120mm and the cable is yours with a length of 110mm is ideal for this model and 3 times cheaper than the service and in performance and quality does not differ from the original
Review translated automatically
Reliable opinion
The tank itself looks quite solid and aesthetically pleasing, compared to the "original", however, the hose is softer, has a thinner wall a bit, besides, it fits the 2015 Mash SeventyFive 125cm3 motorcycle ;)
Review translated automatically
Reliable opinion
Highly recommended. The pictures represent what we actually purchase. They do not hide any defects. Shipping is very well packaged. As for the delivery is very fast. As for me, only pluses.
Review translated automatically
Reliable opinion
Fits simson perfectly stop light works again, very good material. I sincerely recommend everything nax this site, this is not the first purchase and I am satisfied and impressed all the time
Review translated automatically
Reliable opinion
I bought it for the Junak 901 model, however, it turned out that this model has an implanted ankle. However, this was not a problem. After a little modification, it also fits the 901. A solid part, it works flawlessly.
Review translated automatically
Reliable opinion
Quad atv Kingway 150, very solidly made product, the location of the air vent makes it very easy to vent, plastic cover for the pads prevents the entry of dirt, highly recommended
Review translated automatically
Reliable opinion
I recommend as for this price very worthwhile. The shipment came quickly . The product in accordance with the order. If someone needs blocks just like this I recommend. I assess the seller positively
Review translated automatically
Reliable opinion
SHL M11 from 1968. The quality of today's products, unfortunately, does not equal the quality of the original ones, but you can also use them, but unfortunately it is no longer the same as the old original parts.
Review translated automatically
Reliable opinion
Hello I am a motorcycle mechanic I deal in our company with repair and rework of engines electrical installations, general service of single-track vehicles of all Brands .
Review translated automatically
Reliable opinion