Motorcycle carburettor components
Keeway Matrix 25 V4 2010

2024-12-27, 18:42

View original

IOANNIS MAKRIS

I have attached a photo of the factory reed next to the reed I installed.There is a difference in the size of the intake so that more air enters and I have more compression.With the first start the difference was immediately apparent having a 17.5mm carburetor.When I put 21mm it will be even better. The compression is higher and it works very fast.

Review translated automatically

Reliable opinion

2018-05-06, 09:43

View original

Krzysztof

The nozzle is ideal for adjusting the carburetor on a Chinese 2t scooter (zipp quantum). This is the most common nozzle size for unlocking scooters by removing the constriction in the air filter. The difference between before and after is 5km/h V-max and feel a marked improvement in performance.

Review translated automatically

Reliable opinion

2020-04-10, 14:20

View original

Marek

Romet RXL 2011 2t It fits this carburetor, unfortunately I changed from 68 (original) to 75 and it ran worse(on the old one it reached 8k rpm on the new one 6k). I would recommend buying someone with a better air filter(such as a conical). Overall the jetting ok, size shows, screws in well.

Review translated automatically

Reliable opinion

2022-06-25, 10:12

View original

Karol

Junak 104 2t 2013 Very good quality workmanship, the nozzle actually size is about the dimensions it should be, the only thing to which can be attached is that it is slightly higher than the original but it does not interfere with anything.

Review translated automatically

Reliable opinion

2020-05-18, 17:14

View original

Adrian

Benelli 491 98r Valve in working order without any defects or sharp edges Construction is polished hard plastic, contact surfaces are elegantly sanded evenly, plates are quite hard I think this will prolong the life and at the same time strengthen the machine.

Review translated automatically

Reliable opinion

2020-05-31, 11:43

View original

Paweł

Suzuki AP50 97. EVERYTHING as described. I HAD TO REDO THE BASE BECAUSE THE CARBURETOR WAS SET IN A DIFFERENT DIRECTION THAN ON THE ORIGINAL BUT I RECKONED WITH IT. NOW THE SCOOTER HAS MORE POWER.

Review translated automatically

Reliable opinion

2017-08-31, 15:53

View original

Tomasz

I recommend this nozzle precisely made I installed it in the Pegasus gasser from wsk 175 so far I have not fired the engine on it, but I think it will be ok.

Review translated automatically

Reliable opinion

2020-09-05, 23:18

View original

Piotr

The quality of the nozzle not earthly as well as other products have really super durable and improving performance accessories and thus are not expensive .

Review translated automatically

Reliable opinion

2021-01-30, 20:17

View original

Tadeusz

Ursus C308 year of manufacture 1959 Jikov carburetor 30. screwing the nozzle failed M6 thread has a pitch of 1mm. I received a nozzle with thread M6x0.75

Review translated automatically

Reliable opinion