Forgot password
Order status
Free delivery from 150 euro
Motorcycle counters - Page 4
Manufacturer
Price
Sort
from 12
Browse Motorcycle counters - Page 4 by manufacturer
Products reviews
Motorcycle Ural M66 from 1974.Built from scratch.Not yet installed meter , Speedometer very solidly made , A tiny description of the pins in the cubes would be useful. (Only if the meter is mounted to another motorcycle than intended)
Review translated automatically
Reliable opinion
Hello, I am the owner of a 2001 mz rt 125 for which you can't buy anything so I went for a shortcut and pasted from an older version (etz) glasses with frames for the previously mounted rubbers also from an older version so it doesn't look too bad
Review translated automatically
Reliable opinion
Product in terms of fit very poor. Frames too shallow ( low) collapsing possible only after giving up the rubber seal. Glasses OK although also a little thinner than org.
Review translated automatically
Reliable opinion
MZ Ts 150 motorcycle etz 150 bushing + Ts 250 speed shaft for 18' wheel to that rear chain housing for etz 150 cable from etz 250 everything fits flawlessly to make the meter work
Review translated automatically
Reliable opinion
Hello I have a Zip Quantum I had an older meter I ordered a new one I am very satisfied, it is a meter very good fit, and has a super backlight.
Review translated automatically
Reliable opinion
I own a Romet 747 4t 50 scooter. I repaired the auger with this repair kit in less than 20min from wheel turning to installation. I highly recommend it.
Review translated automatically
Reliable opinion
Barton TZR 50N. The auger of very good quality, everything runs as it should. The only drawback is that the color does not match the motorcycle.
Review translated automatically
Reliable opinion
Meter drive for Simson Sr 50 everything fits and works without any problem is very easy to install my opinion very good .
Review translated automatically
Reliable opinion
It looks cosseting thanks to these new toys the whole thing has taken on its former charm good workmanship of the clocks for such a low price I recommend it
Review translated automatically
Reliable opinion
Parts always as described fast shipping nothing has broken yet after installation I recommend.100% satisfaction.
Review translated automatically
Reliable opinion
"Zipp Neken" The meter drive fits in place of the previous one. The workmanship is very good. It works without any complaints.
Review translated automatically
Reliable opinion
The kit is adequate for the price. During assembly, it requires minor corrections, such as trimming the excess plastic after casting, or the element on which the cable is screwed on, also required a minor sanding, so as not to enter too tightly into the opening of the lid. Beyond that, the kit works, but after 3 months and about 1.5 thousand kilometers, it wore out. Despite a good fresh lubrication. Although the culprit may also be a hard-working meter. The cogs in general have worn out. (They wore out)
Review translated automatically
Reliable opinion
Bought for ETZ 251e. Very low quality meter. The bulb holders literally fall out of the meter sockets, the chrome meter frame inaccurately painted. In addition, the counter shows a speed lower by 30 km/h than the actual speed. Unfortunately, after reworking the bulb holes, it is not returnable. The counter fits very well in the rubber cup. If someone does not care about quality and buys a product just for the sake of art, I recommend it.
Review translated automatically
Reliable opinion
Hi. I own a Romet zk 50 and unfortunately in my case the mount did not fit, I had to translate from the old counter which involved cutting the wires and re-soldering in the new counter. Unfortunately I do not have photos because it has already been mounted. But overall this meter is very well made works as it should and of course at a good price. Matching I will give 3 because of my case. Greetings :)
Review translated automatically
Reliable opinion
The counter drive qualitatively looks Ok, except for one minor factory error. Before putting it on, you need to tighten the metal piece into which the cable enters. Factory in My copy the cable entered loosely and was spinning inside. Of course, it was enough to use a pair of pliers and gently clamp the element with the cable inserted, and only then assemble and screw the whole thing together. Of course, remember to use grease on the friction parts. :)
Review translated automatically
Reliable opinion
The counter drive is not working. After installation, the counter does not count. After measuring with a meter on the resistance of the sensor does not indicate any values, unlike the disassembled original which was mechanically damaged. The cable is half too short and the plug is quite different. It is necessary to re-solder from the old one and thanks to this procedure, for known reasons, return is not an option. Only the trash.
Review translated automatically
Reliable opinion
Driving my TS 350 80km/h the counter shows 50km/h. There are no tabs in the housing that base the angle of rotation of the dial around the pointer axis. The hole for the backlight socket is too large; there is a noticeable play, and it should go in pressed. Made nicely, the pointer does not jump, but so what; the product is not suitable for use on a motorcycle used for riding. Maybe on a display copy it would work well?
Review translated automatically
Reliable opinion
Marek mz 251 r 91 frames nice glass also. But the frame has too little material to bend on the housing. It is missing about 1 to 2 millimeters. After mounting on the table in compressions _mightily to seal was about 1 millimeter. I bought a tachometer and a speedometer in the store and there it is as it should be. My thoughts are that on my originals the frames will hold and will not fall off.
Review translated automatically
Reliable opinion
The sleeve required minor adjustments after the factory, like cutting the burrs from the casting or screwing it down by 1mm to make everything fit according to the factory. And also the plastic itself of poor quality, as the locking screw very quickly stopped "locking" and the whole thing had to be set with light glue.
Review translated automatically
Reliable opinion
damaged counter does not indicate speed only kilometers stood at 90 km / h and at shocks a little pointer moved jawa 350 model if I had not fallen when dismantling it I would have already returned it to you such parts are removed from the box and look at whether the new does not mean that it is good.
Review translated automatically
Reliable opinion
I have a 2010 Romet zk 50 my motorcycle was not garaged, it stood outside, after eight years of parking, the counters got wet and rusty and stopped working, so I decided to buy brand new and I bought it, the counters work great display also works, the cans are well nickel plated.
Review translated automatically
Reliable opinion
Not recommended. Poor fit of components. The drive did not fit, did not mesh on the sprocket, after many modifications I was able to fit it, but after driving a few miles it stopped working, worn out cutters on the worm. The plastic nut lacked a hole for the locking pin.
Review translated automatically
Reliable opinion
Set to drive the meter Simson S 51 - I put on it goes without a problem, only in the set there is no clip that is put on the larger worm wheel but without it also goes . I recommend, especially since the price is low and the set is well made.
Review translated automatically
Reliable opinion
Unfortunately, I do not recommend it. Quality poor, workmanship even worse. The cable enters very tightly and wedges, it took a lot of time to set up otherwise the plastic sprocket could break. After twisting, no play, the drive presses against the wheel and locks.
Review translated automatically
Reliable opinion
MZ ETZ 150, 1990, 25000 km mileage, unfortunately it had to be returned, because after recalculating the teeth it turned out to be 24, and as we all know that's how many teeth a worm wheel from 250'tki should have, the correct number of teeth is 27, also this part will not go to etz 125/150/251
Review translated automatically
Reliable opinion
Glass in general okay looks good after installation, diameter correct only slightly thinner than the original DDR but under the chrome frame also not original it is even better because it is lower and with thinner glass you can tighten it
Review translated automatically
Reliable opinion
Hello I own a motorcycle Piaggio 50 1994 The product is made of good material I recommend for others very much. With the installation there is no problem it took me about 15minutes with the installation of the cable. The auger I purchased meets its requirements.
Review translated automatically
Reliable opinion
Hello, since I bought leftovers from laica, and the engine was changed, I decided to put on this set of meters, I am satisfied with the product, cheap fast, good contact with the courier, I can only recommend 100% the seller and the goods
Review translated automatically
Reliable opinion
MZ ETZ 150 Glasses fit perfectly, worse with the frames. The chrome is not perfect, the rim for bending the bezel on the meter housing is much too small, this will not fit the gasket between the bezel and the glass. I coped in another way.
Review translated automatically
Reliable opinion
Moped-Barton Fighter Eco 2020. Before installing it, I recommend opening, cleaning and giving fresh tavot because otherwise it runs very reluctantly. I installed and it works as expected. I hope it will last longer than the original.
Review translated automatically
Reliable opinion
The clock looks really nice, for a replacement for the original MZA clocks. The only thing they lack is that distinctive logo. As for the pluses are their aesthetics, while they work terribly, they distort terribly.
Review translated automatically
Reliable opinion
Benzer aston 125 . 2010 vintage . counter very solidly made . after a small modification due to the fact that the counter is not intended for my motorcycle . works very well and looks great . recommend
Review translated automatically
Reliable opinion
The meter works flawlessly. it would be useful to change the photo of the meter because it is misleading the mounting of the meter sent to the domain is different than in the photo and this causes a very big problem with fixing it. Thanks
Review translated automatically
Reliable opinion
Counter for CZ 350. I needed a new counter for my CZ 350. I replaced it and my bike is as good as new.You always find the best parts I need I am happy to buy from you.Fast and honest.
Review translated automatically
Reliable opinion
Holder cheap until I was surprised and made very nice everything fits nicely like the original to what can be attached to the quality but for this money I recommend to everyone very good product
Review translated automatically
Reliable opinion
WSK M06 B3 1985. Visually does not differ from the original except that the screw and grease fitting visually does not match. Materials and workmanship worthy of recommendation. The counter works smoothly and efficiently. The price is also a revelation.
Review translated automatically
Reliable opinion
Satisfied 100%. Another order of the same part, unfortunately I damaged the previous one myself. Does not differ in quality and appearance from the original. Easy to install very well made.
Review translated automatically
Reliable opinion
Jawa 350 ts 638 Very nice speedometer. Aesthetically made and, most importantly, removed the motive with jumping of the pointer whether on the valleys or after unclutching the handle. I recommend
Review translated automatically
Reliable opinion
romet router XL scooter 2013 mileage 20500 km the quality of this item is b. good it fits perfectly it is made of b. good material I did not have any trouble with it
Review translated automatically
Reliable opinion
romet router XL scooter 2013 mileage 20500 km the quality of this item is b. good it fits perfectly it is made of b. good material I did not have any trouble with it
Review translated automatically
Reliable opinion