Forgot password
Order status
Free delivery from 150 euro
Motorcycle cylinders and cylinder heads
Skutery z Chin QM50QT-2 50 4T Capriolo 2007
Manufacturer
Price
Sort
Options +3 
€20.33
50cc 4T solo head - 104782
ilość zębów:
from 2
Browse by manufacturer
Products reviews
I bought 2 sets of cylinders. There was nothing wrong with one of them. On the second, the liner was honed at an angle. In the upper area of the liner, an approx. 3 x 5 cm area was not covered. One piston had the recesses for the valves milled at an angle. See photo. The other is obviously already an oversize piston. As I have access to appropriate machines, it wasn't too bad for the hobby project.
Review translated automatically
Reliable opinion
Product as described. Fitted to a Eurocka GTR-B 50cc. I changed the valve clearance. The original valves had too much clearance for the kit to work. Normally intended for a kymco (I didn't test fit a kymco agility 50cc). I've driven over 1000km with no problems. Big power gain 20km/h
Review translated automatically
Reliable opinion
Very interesting kit, valves already fitted and sealed. Presence of the EGR system (minor deburring required). Cylinder head is the right size for 47 mm. One small regret: it's hard to tell which is which - 1 segment marked "M" and the other marked "2M". In short, I'm very satisfied with the kit.
Review translated automatically
Reliable opinion
Hello! The goods arrived after two days, (I did not expect such a fast delivery). As for the cylinder it is in excellent quality, there is nothing to complain about. When putting it on, there were no complications everything fits together perfectly. My scooter got a second life thanks to Gmoto! I highly recommend it!
Review translated automatically
Reliable opinion
Repair kit for my project maybe ridiculous but a very good quality product. For such a price I got the piston with the rings on. Half an hour and the scooter works back fired up from the first kick The parts look very good I did not expect such accuracy for such ridiculous money. RECOMMEND TO EVERYONE!!!
Review translated automatically
Reliable opinion
I recently tunigowal a scooter zipp astec used to be 50 now 80 ccm3 year of production 2008. I bought a set of head cylinder piston rings and everything needed. The quality of the parts was at a very high level. The piston perfectly matched to the cylinder. When assembling the engine on these parts there were no complications.
Review translated automatically
Reliable opinion
Cylinder+head without shaft Gy6 4t 80cm3 47mm very well made with attention to detail add a lot of power to your scooter recommend to everyone fits without a problem
Review translated automatically
Reliable opinion
Product very well made great fit for motorcycle with 139qmb gy6 engine. The description of the goods is very accurate and with the real.
Review translated automatically
Reliable opinion
Cylinder MCN 80cm3 4T cylinder a very good class cylinder gives a lot of power I recommend to all who want to increase the capacity of the scooter recommended
Review translated automatically
Reliable opinion
Valve cover gasket 4t o-ring very good quality nothing worth replacing when adjusting valves recommend to all
Review translated automatically
Reliable opinion
Head 90cm very good head for 90cm cylinder well made with attention to detail recommend to all
Review translated automatically
Reliable opinion
14 year old son's first tuning and learning how to install...
Review translated automatically
Reliable opinion
I guess this 90cc NARAKU kit must work well. It would be much more professional of the seller to specify that you absolutely need a specific ECU for this new displacement when installing it on a 50cc! Otherwise, it just doesn't work, and there's no one to help you! When I asked them for help, they told me to go and see a garage. That's cool, but not everyone can afford to go to a garage. So I don't think it's right.
Review translated automatically
Reliable opinion
Cylinder and piston good quality but rings unfortunately not. After 150 km of mileage the gap of the rings after inserting into the cylinder was 3.2 mm Yes does not lie. The engine did not smoke but did not have its power. The solution to this was to put on rings made professionally from good quality materials. The cored rings lasted 13,000 km in a Chinese scooter. In my opinion, it is worth it to buy the made-up rings for 40 PLN than to take apart the engine every 2 weeks.
Review translated automatically
Reliable opinion
Cylinder and piston good quality but rings unfortunately not. After 150 km of mileage the gap of the rings after inserting into the cylinder was 3.2 mm Yes does not lie. The engine did not smoke but did not have its power. The solution to this was to put on rings made professionally from good quality materials. The cored rings lasted 13,000 km in a Chinese scooter. In my opinion, it is worth it to buy the made-up rings for 40 PLN than to take apart the engine every 2 weeks.
Review translated automatically
Reliable opinion
Greetings sincerely. The goods arrived brilliantly packaged but to the point. After unpacking and completing the parts, everything fit perfectly together. I rate the workmanship as very good, the parts of high quality. Everything fit plug-and-play. Piston, rings, everything fit perfectly. With a clear conscience I can recommend
Review translated automatically
Reliable opinion
very good quality cylinder head, adds power when the engine revs up, which can be felt on acceleration and top speed, gaining at least 10km/h if you add an A9 camshaft or more, you'll gain even more, that's for sure! Perfectly packaged .thank you Gmoto .
Review translated automatically
Reliable opinion
Hello I naprowiam skutrey,Qady etc.Ordered parts really are OK . If you order a good part, it rather has to fit, personally as a mehanik I recommend cylinder 65cm for GY6 4T IS in my opinion the best, fragile, 50 has too little power, 80 can take oil in a short time exploatation Greetings
Review translated automatically
Reliable opinion
I own a scooter brand kingway coliber 50 4t. I wanted to increase its power therefore I ordered the whole tiuning set. Immediately after ordering the scooter ignited without any problems. Parts of this set are made of good materialsmtwn the set is very cheap compared to others I recommend.
Review translated automatically
Reliable opinion
Cylinder and heads I ordered for Router Bassa 50 fit perfectly there were no problems scooter after putting it on was much more spry. I highly recommend this product because it is a real tuning of a 50ccm scooter. If you want to upgrade your 50ccm scooter this is what you are looking for. Recommended.
Review translated automatically
Reliable opinion
The set was bought in September 2022. So far it works flawlessly, especially since the scooter is ridden by people who are just learning to ride. So it is loaded in different ways. Cylinder and head and everything that was included in the kit performs well. It simply works. I recommend the product.
Review translated automatically
Reliable opinion
Nuts at an excellent price for 4 hard replacements for the original exhaust mounts on the Honda XR 125. Excellent value for money and a compromise between the original ones difficult to find only in Honda service, for a much larger sum! Highly recommended! 30 years of experience in mechanics!
Review translated automatically
Reliable opinion
Head as for any Chinese is power +30 to horses +30 to awe +100 to fly on the wheel oil no longer takes oil before I had to borrow from my grandfather burned 30l of superol from ursus c 360 now I have no problem with it fitted everything nicely
Review translated automatically
Reliable opinion
The kit is of good quality in my order in the head was a hole for exhaust gas recirculation (EGR), which is not visible in the photo or in the description I recommend for certainty to order a plug for the kit. Apart from this shortcoming 100% compliance with the description I recommend.
Review translated automatically
Reliable opinion
Router Sport 4t. I redid the engine but had a head that was too small, I ordered this product and it is very good, workmanship really high, no leftovers from the processes, the camshaft with the bridge fits elegantly. I recommend
Review translated automatically
Reliable opinion
Goods as described fast processing of the order and shipping of the goods well made perfectly fitting production you do not need to correct anything just unpack install and enjoy the use works flawlessly heartily recommend.
Review translated automatically
Reliable opinion
Hello I have a moped company kingway tiggero poj.50ccm with small modifications to90ccm. I ordered from you a gasket and head which is in working order and 100% perfect,Goods ordered from you are worthy of recommendation
Review translated automatically
Reliable opinion
Very good quality product.The whole kit is available.The camshaft tuning.Gives a very good start to the machine.In addition, it looks very good.I dare say that the value for money in place.Fast delivery and pleasant service.I definitely recommend.
Review translated automatically
Reliable opinion
As for the cylinder head, unfortunately, I have a big minus because after installation it turned out that it is damaged (microcrack) and oil leaks from the engine onto the exhaust pipe.Valve keypad and camshaft ok with no complaints.
Review translated automatically
Reliable opinion
I own a longija 50 QT scooter, the ordered parts fit perfectly, very easy assembly in the set included all the necessary components, after assembly, the measurements of parameters including compression gave amazingly good results.
Review translated automatically
Reliable opinion
Hello I am a mechanic and I buy at Gmoto, various items now I have purchased the above mentioned cylinder has already been mounted on the engine.Engine after overhaul started and the vehicle is already running .Cylinder in my opinion of excellent quality
Review translated automatically
Reliable opinion
Toros Fresco 50 scooter purchased cylinder in the store made of good quality materials. Everything fits elegantly , there were no problems with installation. Now nothing but to ride. I recommend to everyone.
Review translated automatically
Reliable opinion
Cylinder and head assembled just fine , all gaskets fit perfectly , fulfill their role for sure , very solid , carefully made , perfectly shaped , highly recommend!!!!
Review translated automatically
Reliable opinion
I highly recommend. Purchased gaskets fit the engine perfectly and are made of very high quality materials by which nothing differs from the original. The installation went without the slightest problem.
Review translated automatically
Reliable opinion
Four-stroke scooter with engine design of a large number of brands of other scooters. The product fits any valve pomrywy of this type super fast to install without any unnecessary tools.
Review translated automatically
Reliable opinion
It's OK. Suitable for Kymco agility without problems. Otherwise just a standard aluminium cover - use half the official torque, exhaust manifold bolts preferably 5 Nm tighter than the recommended torque, etc.
Review translated automatically
Reliable opinion
romet 2014r cylinder and head fit my romet without any problems I had previously bought a cylinder and piston from another seller the rings did not fit and in this set it was ok
Review translated automatically
Reliable opinion
Gaskets fit perfectly, the only purchase with which I am 100% satisfied in this store. The material from which they were made and the precision of all the holes stands at a high level!
Review translated automatically
Reliable opinion
It fits, but the quality of workmanship is very average and it is a pity that there is no exhaust gasket, which is sorely missing No exhaust fumes fly by the row because there is no even plane.
Review translated automatically
Reliable opinion
Head of poor material, fit to the serial cylinder.tragedy, valves had to be tightened because they barely held. Lots of filings were needed to clean everything.
Review translated automatically
Reliable opinion