Motorcycle electrical & lighting - Page 49
Manufacturer
Price
Sort
Browse Motorcycle electrical & lighting - Page 49 by manufacturer
Products reviews
2019-06-04, 17:38
Radzio
I have a 2006 Baotian bt49qt-9 scooter and before the coil was fitted it was muddling and sometimes dimming. Most simply put, it did not run evenly. So I ordered an "ignition coil tuning Chinese scooters GY6 4T", which as it turned out after installation a hit. The engine began to "smoke" less from the exhaust and began to run evenly. I recommend this purchase to everyone who has the same symptoms. Above all, it stopped "mulling" and became more sprightly. I highly recommend it!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-07-07, 20:11
Bartłomiej
Unfortunately, someone made a mistake in the installation of electrical wires and pins. Have to correct the factory, bulb, "no name" without any markings. Overall from the appearance nice. Lampshade and chrome frame minimally smaller in diameter than the originals, to put on the original lampshades you need to sand the edges of the lampshade minimally.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-02-05, 18:39
Mateusz
My machine is a 1982 ROMET OGAR 205 with a capacity of 50cc. Signal revelation, gives a slightly louder signal than the original so that everyone can hear it from a distance. The signal fits nicely to the frame of my ROMET.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-07-06, 13:41
Adamsky73
WSK 125 B3 1977. In the absence of the original signal - this one fits perfectly. It is smaller, but makes up for it with sound. Installation without problems - price and quality revelation.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-02-13, 06:52
Jacek
Purchased lampshade fits as well as possible, made aesthetically without any burrs like others from allegro, installation very fast handles hit the holes. I RECOMMEND
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-03-02, 20:15
WALDEMAR
Cz175 487 year prod.1988, the mount fits, I had to rework the contacts because the predecessor did something, it burns from a kick but does not go into rotation, probably a matter of adjustment.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-02-19, 20:05
Krzysztof
Greetings. I applied the capacitor to a 1966 SHL 175 motorcycle. It fits, it works, so nothing more is needed for happiness ;) I recommend greetings.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-24, 20:45
Daniel
Simson s53 2001. The lampshade very nice very good match with red bulb and transparent blinkers perfect match I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-17, 09:28
Marcin
The coil does its job however the cable is a little too long for the Honda Dio but it's supposed to be a universal product so no surprises there
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-08-24, 05:39
Jari-Matti
14 year old son's first tuning and installation project...https://media.tenor.com/K21I7mWGh3wAAAAM/spinning-donuts-viralhog.gif
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-07-24, 23:22
Kacperowsky
Simson S51 enduro 1990 lampshade is made of pretty good material but it is very well made and looks very good
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-09-19, 05:52
Arion
Works really well and is a robust product. Can recommend. It was easy to install and worked right away.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-07-12, 18:15
Artur
About a year ago I installed a colleague in a Honda CB500 - probably 1998.To this day he does not complain. Recently another colleague had a charging problem (also CB500, 1999) and asked for advice (the previous regulator - "more branded", read much more expensive - seemed to overcharge the battery [colleague's opinion, I did not check]. It turned out that everything was OK, the one evaluated remained stock). In both cases, the spacing of the mounting holes did not fit very well, but it's 0.6 mm max - just "lick" the housing with a suitable conifer. There could be a little more charging voltage (original :14.5 V, evaluated : 14.17 and 14, 22 V - two copies). If someone "embraces currents" and would like to check the reg. "dry", just like the "classic" ones. - regulated power supply, bulb voltmeter - then you may be strongly surprised. But after installation in the motorcycle everything OK. Probably some "more advanced" technology (perhaps - it's a little undervoltage is also not always so ?) Considering the price / quality ratio - I recommend. In general - in Hondas (at least of these vintages) you need to take care of the charging installation. Most often the problems begin at the connectors of the 3 yellow cables from the alternator. Corrosion, oxidation, increase in resistance, overheating, the rectifier-regulator begins to overheat, the internal electronics fall apart, no longer regulate the voltage and we have a "bubble" from the battery. It is worth checking these areas carefully. With Hondas (CB500, Transalp) I have done a little more than 80 kkm, and also a little at colleagues' repair.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-23, 16:42
Grzegorz
I have a Romet Router RM 125 motorcycle and the horn I purchased works great. It is very easy to connect and screw it to the motorcycle. The signal is so great that even Moses would not be ashamed of it during the parting of the Red Sea. In addition, it is aesthetically made and after a period of use could successfully serve as a paperweight on the desk of the President of the United States. I believe that at this price there is no equal, let alone more equal. I recommend with a pure heart.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-03-28, 10:50
Łukasz
Kingway XT50Q. Direction indicators are made fairly well, but you need to be careful not to tighten them too much because the rubber that holds the screw by which you tighten it, tends to tear :/ connection is very simple plus to plus minus to minus. The indicators shine with a good visible light even on a sunny day. They do not protrude much beyond the outline of the motorcycle, they are short and sleek, do not come apart after the first better deczsz or mud. In general, I recommend them to those who do not want to have a mega protruding lights :D
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-06-16, 10:25
Michał
I bought 4 pieces for the front and rear. The motorcycle looks much better than on the old directions. These are smaller, more aesthetically pleasing and, most importantly, they are Led, less current-consuming and better visible. They are shorter than the factory ones, which makes the machine look better, because they are conspicuous only after they are turned on, when they are off it is hard to notice that the motorcycle has directions at all ;-)Most to the plus. The price is not high. I recommend Zumico GR 200
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-08, 08:10
Jan
The above module , fits almost perfectly to my Yamaha CW 50 Spy , after its installation the scooter got a better engine operation , and its performance ( and especially "screwing" in the revs ) gives a nice sound effect , as for aesthetics it is well-fitted , I would even dare to compare it to modules from a higher price range. I highly recommend this module is worth the money.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-09, 15:23
Mateusz
Hi!!I am the owner of a quad 150 atv for which I decided to purchase the above spark plug.The product is doing a great job,I have no reservations about it,you can really use it for a long time .The plug fits perfectly in the hole to the combustion chamber and gets the right temperature during the spark which allows you to keep the combustion chamber very clean.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-12-28, 09:31
Krzysztof
The only module well suited for 250 cc, 167FM engine. Stable operation throughout the rev range. It sets the slow revs well and smoothly enters higher revs. I recommend this product, others, although in the description also dedicated, unfortunately did not work. The only downside is that there is no description, no specification, to be sure of the purchase.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-03-18, 19:33
ADAM
The signal fits the WSK 125 motorcycle perfectly - it replaces the weak factory horn. I will place it in the housing of the original one and without changing the appearance of the motorcycle I will be sure that I can be heard ;) I recommend the product - it is well made and serves its purpose in 101%. For these few zlotys I could not find anything better.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-03-22, 17:58
Patryk
Hi I am Patryk and I own a 1962 WSK 125 m06 z2 , and I buy all parts and accessories from GMOTO. The parts are always matched and good quality.They are well packed and protected in the package. I highly recommend this store just in time to buy parts for our vintage motorcycles.Regards
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-04-19, 17:00
Przemysław
Honda CB 500 S, 1999. Before replacement charging only above 3000 rpm at slow 12.3 volts without load, after replacement 14.3 volts after load 14.1-14 volts (you would have to check the battery and the pradnic-alternator itself before you proceed with the replacement) In summary - good purchase quality / price I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-10-02, 15:11
Mikołaj
Etz 250 element fits and that is its only advantage the first day the white element fell off it turned out that the lampshade is glued with hot glue terrible junk. Red reflector in the middle of the lampshade is glued in the same way and in addition, only on the sides the glue was sticking out and it did not look aesthetically pleasing.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-05-14, 11:15
Marcin
I ordered an eight-coil, five-wire spark igniter for my engine Z S 162 F M J. Stator has the same parameters is the original, dimensions quality workmanship commendable goods met my expectations. Works flawlessly, wires longer than the original which is an advantage
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-04-14, 09:16
Andrzej
Honda cbr 600 2002 year . The directions are very carefully made while driving do not move and there is no effect as if it is about to fall off as it is in some other Chinese counterparts. I recommend this product even for very demanding users of two-wheelers.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-03-04, 05:36
Stefan
Like everything else, the ignition module is of very good quality and workmanship...and was also delivered quickly. I am very satisfied with all the parts I ordered and glad that I found your site. Here you can find spare parts that you won't find elsewhere.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-04-19, 16:05
Marcin
WSK M06B3 80 r: The capacitor does its job - but before it did I had to ream one of the mounting holes a bit because they have too much spacing, and I had to bend the sheet metal to the other side because the cable is too short to mount it the way it is originally bent.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-02-19, 10:51
Piotr
Hello I have a lot of motorcycles in my garage, currently I am dealing with Jawa 350Ts, the installation went without a problem Jawa runs without any complaints .The next motorcycle in my plan to restore will be a 1976 Kmar Sport and I will certainly buy some parts in your store greetings
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-13, 09:04
Michał
Chinese Longjia 150ccm 4t scooter Bought a starter at a very good price. The quality of the starter at a very high level matched perfect fulfills its task 100% scooter burns immediately after pressing the starter :) I recommend a very well-stocked store 11/10
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-08-14, 21:38
Krzysztof
LED turn signals with very good visibility. Made of very high quality materials making my gem look even more defiant ! I recommend the product wholeheartedly to people who want their motorcycle to look even better !
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-08-19, 08:58
Andrzej
I rate the product as very good. I ordered for the scooter Router New City Line 2 and it fits perfectly. Qualitatively, the lampshade is switched super is strong and durable, aesthetically it is no different from the original. I recommend for anyone who owns Chinese scooters.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-07-28, 08:12
Krzysztof
APRILIA RALLY 2001 year 50cc 2t. I ordered a minarelli starter. Fast delivery after just two days I received the shipment. The product as in the description and in the photo. Super thank you. Ps. And so I will still use gmoto services for further rebuilding of aprilka.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-05-10, 08:49
Rafał
The module as in the pictures with a rubber band to mount rigidly holds the module so it does not slip, well made, pin inputs ok to fit under the male cubes from the quad .spark on the plug returned after replacing the module bashan 200-s7 AC
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-04-30, 23:51
Mateusz
Kingway holigans poj.50 year 2009. i bought ignition coil from this site and it turned out that the quality of this coil is very good, the fit is 100% without any problem I installed, and the appearance is also great this coil looks nice when it is installed
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-17, 14:49
Tomasz
Loncin 250 year of manufacture 2007 Ignition module fits my motorcycle,a sharp increase in power over the entire rpm range.Now colleagues smell the stench of exhaust fumes and have no chance to me.They all said that they also buy this module.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-10-06, 08:29
Łukasz
I purchased parts for my WFM 125 M06 from 1954 first models engine . I had concerns about whether I would get parts suitable for this model but the product I purchased fit . Express shipping , I received the parts on the second day . I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-02-22, 08:51
Ireneusz
I own a 2020 KDX Avenger 125cc quad and had a major problem with the ignition. The purchased spark igniter needed to be reworked, because the input did not fit on the pins. But it was done successfully, the quad runs like gold. I recommend the product.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2015-11-29, 18:50
Wiktor
An indispensable piece of replacement equipment for further trips as well as the home workshop. Part of good quality. Recommended. More about replacement equipment for distant travel at: http://125cmmieszanychuczuc.blogspot.com/.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-06-17, 21:40
MAGDALENA
PRYMUS VENTUS 4 SCOOTER . INSTALLATION VERY FAST AND EASY. MODULE AT A LOW PRICE AND GOOD QUALITY. SINCE THE REPLACEMENT FOR THIS MODULE SCOOTER WORKS VERY SMOOTHLY. BARD FAST SHIPPING.I HIGHLY RECOMMEND THIS MODULE AS AND STORE Gmoto.pl
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-02-24, 18:44
Piotr
The lampshade is made of a very good material that fits on the frame just as you need the lamp can be seen in it very nicely the quality is really very good and best of all it has a very ideal distribution of slits in which you can see the light perfectly
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion








































