Forgot password
Order status
Free delivery from 150 euro
Motorcycle electrical & lighting - Page 65
Manufacturer
Price
Sort
from 356
Browse Motorcycle electrical & lighting - Page 65 by manufacturer
Products reviews
The holder solidly made thick plates with a special slide-out. The holder for p21/5w bulb touches both plates on the sides and style and the bulb shines on 2 filaments. The quality is very good, you can feel that it is not the cheapest holder, but well made and fitted to the lamp. I sincerely recommend and Greetings Marcel Blacharski
Review translated automatically
Reliable opinion
WSK 1969 year b1, the so-called two-frame. This cover is nice because it is made of solid material, it was quite difficult for me to doggone hooks and a little to profile to the shape of the age-old lamp, but this is normal if it combines old after the transitions with new. In the end it fits and sometimes it rains, blows, dusts and the ignition is well shielded and still works. I recommend
Review translated automatically
Reliable opinion
WSK 1969 year b1, so called two frame. The glass fits super well. I had concerns about whether it would sometimes sweep too much space in my lamp (I've had that happen before) but it's all as it should be. It works nicely, gives good light, bulb mounting also without problems. The look is also reminiscent of products from that era. I recommend and greetings
Review translated automatically
Reliable opinion
WSK 125 B! 1971r. The second of the low budget coils I have installed and it works as expected. The first one has already traveled about 500km in extreme conditions, so this one will probably also serve well. The piece is done quite aesthetically - the dimensions match, but the wire could go from the bottom - away from the magneto.
Review translated automatically
Reliable opinion
WSK M06 B1 1970. Coating very good and so many pluses. Requires a lot of work to fit the serrations to the holes in the lamp. In addition, the thickness of the sheet metal makes it difficult. Also, do not overdo it with the thickness of the rubber under the cover, because you will not have enough serrations to fix it.
Review translated automatically
Reliable opinion
WSK of 1969, the so-called two-frame, fits shines, light bright good, installation simple everything fits. The same bulbs apply to SHL from 1966 and 1967. All of them so far serve their purpose
Review translated automatically
Reliable opinion
RECOMMEND !!! Store super :) have all the parts - contact satisfactory.Good quality parts - large selection Fast delivery ! ! ! Effects of work and new parts in the picture :)
Review translated automatically
Reliable opinion
Romet Ogar 125 (2015) The element fit perfectly. Installation consisted of removing the remains of the previous reflector and screwing the new element to the fender.
Review translated automatically
Reliable opinion
I purchased a capacitor for a 1980 Jawka M23 with a capacity of 49 cc. After installation in the engine, it works properly. The spark is there, the engine smokes, you can go to the world.
Review translated automatically
Reliable opinion
Jawa 50 ogar 200 received a new capacitor from gmoto.pl. capacitor very good quality. I would also add that the contact with the store is very good.
Review translated automatically
Reliable opinion
Headlight spring fits Simson sr 50 easy installation nothing moves or falls out quality of material is very good .
Review translated automatically
Reliable opinion
SHL m11 1967. The lamp fits perfectly, as for workmanship the quality does not knock. If it was better made I would recommend it to others.
Review translated automatically
Reliable opinion
6V 2W light bulb. Bought them for my KE125. Fitted exactly as per description. Very good light and overall quality.
Review translated automatically
Reliable opinion
I am restoring a 1970 WSK M06 B1 purchased lamp fits without problems. The appearance does not differ from the original. I recommend.
Review translated automatically
Reliable opinion
The light springs were a perfect fit for attaching a light insert to the headlight bezel on my Moto Guzzi V50III.
Review translated automatically
Reliable opinion
Romet Ogar 200 A decent condenser for not much money. Works very well so far. I recommend
Review translated automatically
Reliable opinion
I have purchased an ignition cover for my Wska 125 M06 B3 and so briefly and to the point: - visually it looks very good, although the quality of the plastic slider could be better while the chrome is first class - fit the cover with the holes in the lamp after a small correction with pliers, and here it should be noted that the overlapping of the plates requires more strength and technique because it is a hard material, but it is better to take a little trouble than to complain that it is plasticine.isn't it? - I like the aesthetics, there are no unnecessary parts of the casting and for the money I think it is worth buying. Regards K.
Review translated automatically
Reliable opinion
Romet Kadet , the capacitor fits in place of the old one without reservation, the installation went without a problem. Wire minimally shorter than the original about 3mm, but reaches the same with the same arrangement in the spark gap. Remember during installation to soak the felt in oil and properly bend it to adhere to the magnet cam (if you install without bending it will not lubricate).
Review translated automatically
Reliable opinion
Romet Ogar 205 from 1990.I received this smaller capacitor with a length of 22 mm , it has a shorter wire and there was a problem with connecting it to the coil.After talking to the store staff I was immediately sent the longer capacitor -27 mm without any additional cost.This capacitor has a wire 5 mm longer and fits perfectly to the above type of Romet. I recommend this store.
Review translated automatically
Reliable opinion
A capacitor is an important component in an electrical system. It is really worth replacing from time to time preventively. Fits into a rometa ogar 205, a little work to put on (pulling off the cover, magneto, etc.), but there were no problems with fitting into the spark gap. After installation, the whole installation works well. Romet Ogar 205, year of manufacture 1987
Review translated automatically
Reliable opinion
Hello .Evaluating this product , I will write briefly . The product matched perfectly to my lamp not some counterfeit from the east , you can see that the material from which the spring is made is of high quality and I am sure that the glass mounted on this spring will certainly hold firmly in the housing of the lamp. I recommend for sure.
Review translated automatically
Reliable opinion
Junak M16 - the cartridge fits almost perfectly; the quality is incomparably better than the original from Rice (all Chinese plastic, frosted-milk glass - causing blinding light scattering of the bulb). Aside from the mismatched spring attaching the bulb holder, the effect of replacing the headlight insert is worth any money. Recommended.
Review translated automatically
Reliable opinion
The lamp performed very correctly as a faithful copy of the original. It lies on the fender at a satisfactory level, admittedly with a slight gap between, but personally it does not bother me. I used a total of only the base of the lamp and with the original shade it blends practically perfectly. I heartily recommend it!
Review translated automatically
Reliable opinion
A weboldal tökéletes, minden igényt kielégítő. A szállítás még így is, hogy nemzetközi (Lengyel - Magyar) gyorsabb volt, mint sokszor Magyarországon belüli szállítás. A kifizetett alkatrészekről, a csomagom állapotáról folyamatos jelzést kaptam. Az alkatrészekkel 100 %-ban elégedett vagyok :-) *****+*
Review translated automatically
Reliable opinion
Headlight springs do their job perfectly, very well press the rim of the lamp to the reflector, they are bent at a slightly smaller angle than the original but this does not affect the quality and fit. I highly recommend gmoto store, very good quality parts and you can easily find everything.
Review translated automatically
Reliable opinion
Hi I am Patryk and I own a 1962 WSK 125 m06 z2 , and I buy all parts and accessories from GMOTO. The parts are always matched and good quality.They are well packed and protected in the package. I highly recommend this store just in time to buy parts for our vintage motorcycles.Regards
Review translated automatically
Reliable opinion
Hi I am Patryk and I own a 1962 WSK 125 m06 z2 , and I buy all parts and accessories from GMOTO. The parts are always matched and good quality.They are well packed and protected in the package. I highly recommend this store just in time to buy parts for our vintage motorcycles.Regards
Review translated automatically
Reliable opinion
I ordered parts for ogar 200 year 89 Plates very good quality, installation went without any complications. I recommend Gmoto the best parts at great prices only at them. Express shipping, of course InPost oaczkomaty, the most convenient form of shipment, I received the package after 11 p.m. I recommend!!!
Review translated automatically
Reliable opinion
Romet Kadet 87. Does not fit in the original base. Too large diameter of locating pins. A failure! Execution poor. Spacing of screws-fits. Cables very thin. Not a Polish manufacturer as I was assured. Goods to return. I do not recommend this coil, avoid from afar!
Review translated automatically
Reliable opinion
For the mosquito 2350 with the s38 engine (egg), the coil purchased does not fit in the holes of the spark arrestor (the spacing of the pins is wider by about 0.5mm, which makes it impossible to install without interference from a file). As for the materials, I have no major complaints, however, the wire could be a little longer.
Review translated automatically
Reliable opinion
I have a Romet 200 with an engine from a 88 year old warbler. The purchase was really successful. It was put on without any problems 0 modifications, everything fitted like a dream. I RECOMMEND SHOPPING AT GMOTO SHOP IS SUCH A SUCCESS.
Review translated automatically
Reliable opinion
Mr2375, Ogar 205 and 50-T1 toners. This coil will recall the ignition of any of them in the 2375 has worked for 5 years and I have no complaints. It always required a slight grinding, but that's a minor thing. The best part is that the spark would kill a horse and until you hear it crackle beautifully.
Review translated automatically
Reliable opinion
Mosquito Mosquito s38 1975-purchased parts are of high quality in terms of workmanship, aesthetics, efficiency of operation -I recommend many motorcycles I assemble and with this company super to cooperate-mega efficient shipping 24 hours to the other end of the Polish b.good contact with the seller.RECOMMENDED
Review translated automatically
Reliable opinion
The cover is nice, but to fit this to the lamp in the humpback, I had to grind all the brackets and the contact surface itself, because it is flat (and the lamp is not). In a word, the fit is hopeless, but somehow it can be pushed in there and looks quite nice.
Review translated automatically
Reliable opinion
Jawa 50 Mustang. An essential item to purchase when refurbishing a spark arrestor. Especially in motorcycles that undergo a complete restoration, as in my case. This element immediately "revived" the motorcycle which gave hope for further progress.
Review translated automatically
Reliable opinion
The parts I ordered (capacitor, platens and ignition coil) actually match the description. After a year's break, my Romet ogar 200 moped finally came to life (it has a spark) and I can enjoy riding it again. Thank you very much!
Review translated automatically
Reliable opinion
Ignition lock for Peugeor Sum-Up 125 fits and fulfills its purpose. The electrical connections work, you just have to take the 6-pin plug from the old cable. I can only recommend the price and service.
Review translated automatically
Reliable opinion
Romet Ogar 205 The ignition coil is a tragedy. It does not fit in the mounting holes. After reaming the holes and installing the coil, it was impossible to put on the magnet wheel. It was necessary to file the coil. Final mounted worked 50 seconds and died.
Review translated automatically
Reliable opinion
Wsk 125 1976.Everything in the best possible order although there are minor differences in comparison with the old lampshade and bulb mounting, but everything can be matched. You just need to remember to buy a new headlight bulb, because it is a different mount.
Review translated automatically
Reliable opinion
It fits perfectly in the original frame. The glass layout is at first glance the same as the original. The mirror is super chrome plated. A big plus is the parking light bulb mount included, it saves us money. I confidently recommend.
Review translated automatically
Reliable opinion