Manufacturer
Price
Sort
Browse by manufacturer
Products reviews
2019-09-19, 12:32
Sebastian
I own a jawa 50 ogar 200 moped.I purchased an ignition coil for this model and am very pleased with the product. Well made, safely packaged and, of course, efficient. After installation the jawka fired up and I can still enjoy the ride. I highly recommend the product and gmoto.pl store for their professional service and low parts prices.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-09-20, 17:42
Krzysztof
WSK 1969 year b1, the so-called two-frame. Junak m10 1963 and 1965 SHL 1966 and 1967 All these models have such bulbs. This product rarely burns out for me. The light gives good, installation oki so I recommend and greetings.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-02-05, 18:39
Mateusz
My machine is a 1982 ROMET OGAR 205 with a capacity of 50cc. Signal revelation, gives a slightly louder signal than the original so that everyone can hear it from a distance. The signal fits nicely to the frame of my ROMET.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-07-06, 13:41
Adamsky73
WSK 125 B3 1977. In the absence of the original signal - this one fits perfectly. It is smaller, but makes up for it with sound. Installation without problems - price and quality revelation.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-12-31, 18:43
Szymon
I purchased a capacitor for a 1980 Jawka M23 with a capacity of 49 cc. After installation in the engine, it works properly. The spark is there, the engine smokes, you can go to the world.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-09-19, 12:43
Sebastian
Jawa 50 ogar 200 received a new capacitor from gmoto.pl. capacitor very good quality. I would also add that the contact with the store is very good.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-06, 14:10
PAWEŁ
Pipe not bad but fragile fully shielded candle clamp only on the thread so the thread is destroyed price adekfatna to quality
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-06-29, 16:42
AnoniM
Romet Ogar 200 A decent condenser for not much money. Works very well so far. I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-07-20, 15:07
Miłosz
As for such a low price it is worth buying fits perfectly to Romet ogar 205 so far works well. recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-21, 14:20
Tomasz
Simson s51. Fulfills its purpose and on top of that a cool feature.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-04-12, 17:56
Franciszek
I put the coil on the MZ 250.2 ES TROPHY, late last autumn, so that the motorcycle, practically was already in "winter sleep". When I started riding with the new coil in March this year, unpleasant events began to happen, as the motorcycle had difficulty firing up, and while riding, unexpectedly stopped working. After a while, it was again somehow possible to start the engine, but the ride was uneventful, and I finally put the motor in the garage to determine the cause of the problems. Somewhat accidentally, I brought my hand close to the area of the coil when the motorcycle briefly fired up, and I nearly fell to the ground due to an electric shock, which instead of the spark in the spark plug, accumulated on my person. I don't know if this new coil had a puncture from the beginning, but it certainly does now. So, after using it for a short time, I know that this coil, is not suitable for operation. It brought me a lot of worry, because I did not suspect that a new product, could be so unreliable. Refers to the purchase of November 2018 - order 497413
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-03-04, 23:37
Jacek
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-04-09, 16:36
Daniel
Ignition pipe bought for a WSK 125 motorcycle, at first glance it looks perfect, a very important advantage is the covers to protect against moisture or driving in the rain. Why aesthetics "could be better", because the workmanship is good, but not refined. The important thing is that it works as it should, and I am also very satisfied with the service of the GMoto store, also recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-09-06, 16:45
Filip
Jawa 50 type 20, I recommend to everyone. At first I thought it would be disgusting to ride with a glowing pipe, but this is nonsense. If a person does not look closely, the light will not see. And from the point of view of operation it is a super solution. You don't have to unscrew the spark plug to check if there is a spark. I sincerely recommend and install in all my Jawkas and Rometas.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-18, 08:19
Pawel
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-18, 08:17
Pawel
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-11-14, 17:21
Mariusz
WSK 175 coil gives spark but the engine did not run properly. I put it in another motorcycle and the same thing, the engine only ran at idle and when I added gas it did not go into higher revs. After installing a used PRL coil, the moto runs without problems. Be careful, a new part and there is no assurance that the engine will work properly.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-03-18, 19:33
ADAM
The signal fits the WSK 125 motorcycle perfectly - it replaces the weak factory horn. I will place it in the housing of the original one and without changing the appearance of the motorcycle I will be sure that I can be heard ;) I recommend the product - it is well made and serves its purpose in 101%. For these few zlotys I could not find anything better.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-03-13, 14:40
Oliwier
I own a 2008 Yamaha TZR 50 brand motorcycle the installation of the product was fabulously easy no effort required the product fulfilled its task 100% if someone is looking for an ignition pipe I recommend this model, because it is an excellent quality product. I heartily recommend and greetings.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-01-22, 10:01
DAWID
I RECOMMEND THAT YOU DO NOT HESITATE TO CONTACT ME ON THE OLD CEFCE THERE WAS A WEAK SPARK AND WE WERE LOOKING FOR THE CAUSE NOW AFTER REPLACING IT WITH THIS ONE THERE IS A VERY VISIBLE AND STRONG STABLE SPARK I RECOMMEND THAT IN MY CASE THE PROBLEMS WITH THE SPARK DISAPPEARED DURING REPAIRS WITH THE ELECTRICIAN EVERYONE SHOULD CHANGE IT FOR PEACE OF MIND AND CORRECT SPARK
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-06-18, 13:14
Piotr
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-12-26, 11:24
Andrzej
Lambretta C125 1951 year of production. The wrench is very good, short, only with it I can reach the candle. In addition, it has hexagonal sockets cut in the handle to handle bolts and nuts in sizes often encountered. The wrench fits very much with the climate of my old scooter.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-10-13, 19:06
Zita
Wsk 125 gil. Trying to restore it after 20 years of sleep in garage. Had to change spark plug. Chose tool randomly; I was a bit worried, that spark plug key won' t fit cause engine head looked kind of big, but it fit just fine. Spark changed. We have ignition :).
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-01-15, 12:30
Hubert
I own a 1988 Romet Ogar 200, I needed a new bulb and decided on this very model. The replacement went very smoothly, everything fits perfectly :) the quality is visible to the naked eye. It shines great and I no longer have to worry and riding in the evening :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-04-25, 12:39
michał
I warmly recommend gmoto.pl store is here a lot of parts for motorcycles and mopeds parts as described and also fit motorcycles fast shipping and also fast turnaround time parts made of good solid materials.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-01-11, 20:25
Jarosław
I bought for my motorcycle works flawlessly and at the same time looks nice. The pipe is held very well so that the motorcycle does not "lose" the spark, the light is also useful during malfunctions, because you can easily see what is broken plug or ignition.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-02, 19:39
Paweł
The pipe checks out, spark ok, no puncture, especially since the vehicle lacks an ignition switch and pulling the pipe takes care of it. There were no kicks (although I know that this should not be done, but well. who is blameless let him be the first. ?
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-08-10, 15:21
Łukasz
The parts I ordered (capacitor, platens and ignition coil) actually match the description. After a year's break, my Romet ogar 200 moped finally came to life (it has a spark) and I can enjoy riding it again. Thank you very much!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-02-17, 09:48
Jan
Romet ogar 205, 50 cm³, 1987r The wrench fits nicely with the old tools for my ogar, it's very similar to the ones from the communist era, the only downside is that it's not exactly bent and has a slight play on the spark plug itself, but other than that I recommend it
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-06-05, 21:50
Miłosz
Ogar 200 This pipe the only pipe maker will really make you happy. Do you have a problem with the disappearing spark? try to replace the pipe and you will find that the spark will not escape anywhere ! quality good everything fits robukt made aesthetically and nicely.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-09-15, 15:45
Wiesław
I bought this product "in stock" , however, it looks very good. As soon as I mount it somewhere I will write what and how, but I can already see that it will be good as with the previous pipe only that straight mounted to Yamaha Majesty 125 1998 vintage.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-09-27, 14:09
Dawid
Lights up nicely in a motorcycle, no loss of power or firing can be seen Bought as a spark tester for ignition, among other things in such engines. For the price I recommend as a tester, I do not know how in the long run, but I assume it will last
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-10-17, 23:52
Dawid
Romet Ogar 205, a gadget that makes it much easier to work on the engine during activities such as adjusting the ignition, you can control the spark without unscrewing the spark plug. Once the engine is fired up, it looks striking, especially in the dark.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-01-17, 07:14
Tomasz
Hello, I own two 1985 M-2 motorcycles and one 1987 M-3. I am currently in the process of rebuilding each in turn. The parts I bought from Gmoto met my expectations. They were of good quality and fit without any problems.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-04-03, 15:34
JERZY
Motorcycle 50 ccm,year of production 1986 it is known not the first youth .When starting sometimes the spark disappeared.So it had to be replaced with a new one and I heard the first sounds of the long unheard of engine of my youth
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-06-27, 06:02
Mariusz
Unfortunately the glow pipe is not even worth the few zloty. I should return, but not worth the trouble. Generally at slow speeds it still works, at higher speeds it stops conducting - a loose "connection" in the middle.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-03-09, 21:20
Łukasz
Romet Ogar 200 engine 223 capacitor fits into the spark plug socket, after installing and adjusting the ignition the bike has a strong spark and turns on the revs well, I strongly recommend this capacitor for Ogar 200
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2014-09-11, 21:30
Jerzy
I have been shopping with this seller for a long time and each time I am very satisfied with the quality, speed and contact with the seller. I have already recommended several offers to my friends, who are also very satisfied.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-07-23, 06:27
Łukasz
First, I bought elsewhere a supposedly original coil for 300 zł. It turned out that it worked for 2 hours and that was it I decided to buy a replacement, so far since Friday it works flawlessly.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-09, 10:14
Mariusz
Ogar 205 pon 50 cm year 1987.Product of good quality, the shape resembles the original which is a plus, the way of assembly is trivially simple.Product 100% consistent with the seller's description.Price revelation.I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion









