Forgot password
Order status
Free delivery from 150 euro
Motorcycle electrical & lighting
Jawa TS 350
Options +3 
Browse by manufacturer
Products reviews
I own a jawa 50 ogar 200 moped.I purchased an ignition coil for this model and am very pleased with the product. Well made, safely packaged and, of course, efficient. After installation the jawka fired up and I can still enjoy the ride. I highly recommend the product and gmoto.pl store for their professional service and low parts prices.
Review translated automatically
Reliable opinion
Unfortunately, someone made a mistake in the installation of electrical wires and pins. Have to correct the factory, bulb, "no name" without any markings. Overall from the appearance nice. Lampshade and chrome frame minimally smaller in diameter than the originals, to put on the original lampshades you need to sand the edges of the lampshade minimally.
Review translated automatically
Reliable opinion
The bulb has the specifications as shown in the description,fits under the BA9S socket,It looks like a good quality product,but it remains to be seen,I attach a photo that may help someone in choosing the right bulb.
Review translated automatically
Reliable opinion
My machine is a 1982 ROMET OGAR 205 with a capacity of 50cc. Signal revelation, gives a slightly louder signal than the original so that everyone can hear it from a distance. The signal fits nicely to the frame of my ROMET.
Review translated automatically
Reliable opinion
Pipe without comments. On the other hand, the cable (at this stage of installation I can not comment on the quality) is simply too short by about 10 cm. After installation, I may be able to connect the pipe to the carburetor.
Review translated automatically
Reliable opinion
RECOMMEND !!! Store super :) have all the parts - contact satisfactory.Good quality parts - large selection Fast delivery ! ! ! Effects of work and new parts in the picture :)
Review translated automatically
Reliable opinion
WSK 125 B3 1977. In the absence of the original signal - this one fits perfectly. It is smaller, but makes up for it with sound. Installation without problems - price and quality revelation.
Review translated automatically
Reliable opinion
Cz175 487 year prod.1988, the mount fits, I had to rework the contacts because the predecessor did something, it burns from a kick but does not go into rotation, probably a matter of adjustment.
Review translated automatically
Reliable opinion
The wrench may be minimally too long, although it depends on what motorcycle you use it for. Overall I am satisfied. In the photo SHL M11, for Romet Ogara 205 perfect.
Review translated automatically
Reliable opinion
GOOD QUALITY . HANDY ITEM . VISUALLY ALSO OK . MATERIAL FROM WHICH IT WAS MADE SEEMS OK .
Review translated automatically
Reliable opinion
I bought the battery for an electric Jeep for my son. It charges quickly and lasts a long time. Definitely recommend.
Review translated automatically
Reliable opinion
GOOD QUALITY . HANDY ITEM . VISUALLY ALSO OK . MATERIAL FROM WHICH IT WAS MADE SEEMS
Review translated automatically
Reliable opinion
I put the coil on the MZ 250.2 ES TROPHY, late last autumn, so that the motorcycle, practically was already in "winter sleep". When I started riding with the new coil in March this year, unpleasant events began to happen, as the motorcycle had difficulty firing up, and while riding, unexpectedly stopped working. After a while, it was again somehow possible to start the engine, but the ride was uneventful, and I finally put the motor in the garage to determine the cause of the problems. Somewhat accidentally, I brought my hand close to the area of the coil when the motorcycle briefly fired up, and I nearly fell to the ground due to an electric shock, which instead of the spark in the spark plug, accumulated on my person. I don't know if this new coil had a puncture from the beginning, but it certainly does now. So, after using it for a short time, I know that this coil, is not suitable for operation. It brought me a lot of worry, because I did not suspect that a new product, could be so unreliable. Refers to the purchase of November 2018 - order 497413
Review translated automatically
Reliable opinion
I purchased a 12V turn signal interrupter. The product is solidly made, with durable materials that ensure long life. The interrupter works flawlessly, providing smooth and regular flashing of the turn signals, which improves visibility and safety on the road. Installation is simple and intuitive, compatible with most 12V systems on motorcycles and cars. Aesthetically it looks good, its small size allows it to be discreetly placed in the vehicle. The product is reliable and weatherproof, making it a great choice for anyone looking for a durable and effective solution for their turn signal system.
Review translated automatically
Reliable opinion
I write opinions from my point of view . this cable I would not use it anywhere A especially as a fuse for the battery and because it is not a product but a tragedy. Chinese something! For 10 zl I expected it to be solidly made. The appearance is great. But the cable . cross section like a wire from the headphones in the phone. The eyelet at the end of this fuse is held thanks to this lagging on this cable because there is not much copper there. Withdraw it from the trade because it makes no sense. Don't suggest putting it on and especially for motorcycles because you will kick the installation. Unfortunately I had to solder other cables with a thick cross section.
Review translated automatically
Reliable opinion
Hello I own a Romet ogar 200 the list of works to do as it is in 1987 vintage did not encourage to start work I started looking for parts and surprise gmoto huge parts great description affordable prices quality very good. Understandable descriptions cool kits. First purchase for 500 zloty in two days delivery. More parts in the basket and more and more knowledge Thank you and recommend. Gwalbert
Review translated automatically
Reliable opinion
Hello. I own an ETZ 250 motorcycle - for it I also purchased the product shown above (4 pieces). Each of the bulbs shines well; they were not broken, did not require complaints. They fit 'tightly' into the BA7S holders - and that's good. There is then no risk of them slipping out while driving. Aesthetics leave nothing to be desired - a bulb like any other. I recommend this product.
Review translated automatically
Reliable opinion
The products purchased are the audible signal, clutch cover gasket, oil pan gasket and oil filter. All the above mentioned parts are for Yamaha XJ600 Diversion motorcycle. Gaskets made bdb The sound signal in zinc does not rust and finally the sound is as it should be and as ram. Oil filter as it is a filter once again from hiflo company bdb.
Review translated automatically
Reliable opinion
Interrupter decent, when you turn on the turn signal works without unnecessary delay. Workmanship as precise as possible. It works flawlessly. Terminals made very well, the connectors stick like glued, They are wide enough that you have to use force to slide the connectors onto them, which is a great advantage. This is a really solid and refined design.
Review translated automatically
Reliable opinion
Despite the opinions presented by dissatisfied customers I decided to complete the order.I am pleasantly surprised by the speed with which the order was completed,the goods were carefully secured and consistent with the order.Let's hope for more such companies with THAT kind of service.Best regards to all those who will use Gmoto.pl company thanks to my opinion.
Review translated automatically
Reliable opinion
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
Reliable opinion
I've been putting together a 1983 Etz 250 for a few days for a neighbor who is the first owner of this beautiful motorcycle. Unfortunately, the blinkers were not working, it turned out that the fault was the turn signal interrupter. Immediately with help came ,,gmoto,, fast delivery super workmanship, easy installation and beautiful aesthetics. Until it is nice to repair the motorcycle!
Review translated automatically
Reliable opinion
WSK 175 coil gives spark but the engine did not run properly. I put it in another motorcycle and the same thing, the engine only ran at idle and when I added gas it did not go into higher revs. After installing a used PRL coil, the moto runs without problems. Be careful, a new part and there is no assurance that the engine will work properly.
Review translated automatically
Reliable opinion
The signal fits the WSK 125 motorcycle perfectly - it replaces the weak factory horn. I will place it in the housing of the original one and without changing the appearance of the motorcycle I will be sure that I can be heard ;) I recommend the product - it is well made and serves its purpose in 101%. For these few zlotys I could not find anything better.
Review translated automatically
Reliable opinion
A weboldal tökéletes, minden igényt kielégítő. A szállítás még így is, hogy nemzetközi (Lengyel - Magyar) gyorsabb volt, mint sokszor Magyarországon belüli szállítás. A kifizetett alkatrészekről, a csomagom állapotáról folyamatos jelzést kaptam. Az alkatrészekkel 100 %-ban elégedett vagyok :-) *****+*
Review translated automatically
Reliable opinion
Bolts for the installation of platinums have too large a diameter. To assemble the ignition you need to grind the hole of the "anvil" minimally, the hammer fits ok. The hole of the anvil (for the screws for adjusting the gap behind the platynes) too small/poorly profiled, you need to grind with a small file to freely adjust everything.
Review translated automatically
Reliable opinion
Simson S51, 50ccm, 1989. I recommend the 12V bottle ignition coil, very easily and successfully passed the installation. The product 100% fulfills its purpose. You can see that the coil is decently made. The only drawback is the execution of the thread on the terminals 15 and 1 but just re-thread and it is ok. I recommend
Review translated automatically
Reliable opinion
Purchase very solid and durable. Fits the ignition coil perfectly as well as the spark plug. I have not seen any ignition pipe that holds so tightly. The product is very well made, close to the original. The rubber on the pipe is also a very good idea, as it insulates the plugs from water, etc.
Review translated automatically
Reliable opinion
I RECOMMEND THAT YOU DO NOT HESITATE TO CONTACT ME ON THE OLD CEFCE THERE WAS A WEAK SPARK AND WE WERE LOOKING FOR THE CAUSE NOW AFTER REPLACING IT WITH THIS ONE THERE IS A VERY VISIBLE AND STRONG STABLE SPARK I RECOMMEND THAT IN MY CASE THE PROBLEMS WITH THE SPARK DISAPPEARED DURING REPAIRS WITH THE ELECTRICIAN EVERYONE SHOULD CHANGE IT FOR PEACE OF MIND AND CORRECT SPARK
Review translated automatically
Reliable opinion
I ordered parts for ogar 200 year 89 Plates very good quality, installation went without any complications. I recommend Gmoto the best parts at great prices only at them. Express shipping, of course InPost oaczkomaty, the most convenient form of shipment, I received the package after 11 p.m. I recommend!!!
Review translated automatically
Reliable opinion
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
Reliable opinion
Nw why but after adjusting the cam to the "marks" to the rotor(checked on several rotors, even on a new one purchased here) the ignition alignment does not match, i.e. the ignition opens the platens at the wrong moment, you need to move the cam in relation to the marks by about 15-20*
Review translated automatically
Reliable opinion
Hello I have a lot of motorcycles in my garage, currently I am dealing with Jawa 350Ts, the installation went without a problem Jawa runs without any complaints .The next motorcycle in my plan to restore will be a 1976 Kmar Sport and I will certainly buy some parts in your store greetings
Review translated automatically
Reliable opinion
Hello I have a lot of motorcycles in my garage, currently I am dealing with Jawa 350Ts, the installation went without a problem Jawa runs without any complaints .The next motorcycle in my plan to restore will be a 1976 Kmar Sport and I will certainly buy some parts in your store greetings
Review translated automatically
Reliable opinion
Hello I have a lot of motorcycles in my garage, currently I am dealing with Jawa 350Ts, the installation went without a problem Jawa runs without any complaints .The next motorcycle in my plan to restore will be a 1976 Kmar Sport and I will certainly buy some parts in your store greetings
Review translated automatically
Reliable opinion
Hello I have a lot of motorcycles in my garage, currently I am dealing with Jawa 350Ts, the installation went without a problem Jawa runs without any complaints .The next motorcycle in my plan to restore will be a 1976 Kmar Sport and I will certainly buy some parts in your store greetings
Review translated automatically
Reliable opinion
I have a Romet 200 with an engine from a 88 year old warbler. The purchase was really successful. It was put on without any problems 0 modifications, everything fitted like a dream. I RECOMMEND SHOPPING AT GMOTO SHOP IS SUCH A SUCCESS.
Review translated automatically
Reliable opinion
Lambretta C125 1951 year of production. The wrench is very good, short, only with it I can reach the candle. In addition, it has hexagonal sockets cut in the handle to handle bolts and nuts in sizes often encountered. The wrench fits very much with the climate of my old scooter.
Review translated automatically
Reliable opinion
Wsk 125 gil. Trying to restore it after 20 years of sleep in garage. Had to change spark plug. Chose tool randomly; I was a bit worried, that spark plug key won' t fit cause engine head looked kind of big, but it fit just fine. Spark changed. We have ignition :).
Review translated automatically
Reliable opinion
Ordered to replace the same coil (model and brand) which no longer worked. The old one lasted almost 10 years. These don't work when fitted, the vehicle won't start. So I ordered a LUCAS elsewhere. 30€ lost!
Review translated automatically
Reliable opinion