Forgot password
Order status
Free delivery from 150 euro
Motorcycle electrical & lighting
MZ ETZ 250
Options +3 
Browse by manufacturer
Products reviews
Hello As for the product re: quality and aesthetics are OK but there is a small but about their fit: I have a reservation about the lampshades that I received from you and namely I received two pieces with different patterns. One lampshade has a circular embossing pattern and the other lampshade is embossed in a pattern of spreading rays. I don't know what the issue is here. Motorcyclist
Review translated automatically
Reliable opinion
Money thrown down the drain in the front lights bulbs 5W and in the original I have 21W I thought what's the problem I'll put the old ones and here's the problem they don't fit, you can't screw on the cover of the turn signal, now on these bulbs blink very quickly you need to look for the orginals
Review translated automatically
Reliable opinion
Zipp Neken 50 4T 2017.Just a bulb,and very happy.There is a huge difference in comparison with the factory-installed Ba20D.Mounting trivially easy and more convenient,because there is a much shorter base of the bulb.Perfectly copes.Greetings and thanks.
Review translated automatically
Reliable opinion
Mz Etz 250 1989. The product did not meet my expectations mainly the quality of the chrome. There is no effect of ,,mirror," besides that the frame is about 5 mm narrower than the original. The fit itself is good there was no problem with installation.
Review translated automatically
Reliable opinion
The turn signal lamp shade fits Simson Sr 50 I recommend the product is made of very good material like the original everything fits without any problem the aesthetics are very nice in my opinion it is worth buying
Review translated automatically
Reliable opinion
Regulator very well made. It could be a little smaller, it would be easier to install because, for example, in the tropics it is tight under the lid. Moto on the regulator works elegantly, no problems with charging.
Review translated automatically
Reliable opinion
Regulator very good charging has improved immediately much better than the old mechanical possibility of connecting to the installation which has 5 cables to the regulator I recommend to everyone
Review translated automatically
Reliable opinion
Moped Simson s51 enduro N version very good I can recommend but they are not in appearance like the original umnie it could be factory defects but they look good for the price
Review translated automatically
Reliable opinion
The wrench may be minimally too long, although it depends on what motorcycle you use it for. Overall I am satisfied. In the photo SHL M11, for Romet Ogara 205 perfect.
Review translated automatically
Reliable opinion
Keeway Superlight 125cc, grille mounted without any problem , Plastic but looks cool. Fits without combining , attached with screws (included)
Review translated automatically
Reliable opinion
The item gives the impression of being solid. Plastics of good quality, a set of properly matched fuses included. Recommended product
Review translated automatically
Reliable opinion
Headlight spring fits Simson sr 50 easy installation nothing moves or falls out quality of material is very good .
Review translated automatically
Reliable opinion
Simson s51 enduro 1990 turn signal is really very well made,very well fitted and very good looking
Review translated automatically
Reliable opinion
MZ ETZ 150 z1990 r,turn signals and rear lamp color white installation went ok I am satisfied b.good purchase I recommend.
Review translated automatically
Reliable opinion
Etz 125- very well made, very good quality, super sie presents I am very satisfied with this product.
Review translated automatically
Reliable opinion
The light springs were a perfect fit for attaching a light insert to the headlight bezel on my Moto Guzzi V50III.
Review translated automatically
Reliable opinion
GOOD QUALITY . HANDY ITEM . VISUALLY ALSO OK . MATERIAL FROM WHICH IT WAS MADE SEEMS
Review translated automatically
Reliable opinion
Mz etz 250 material good and workmanship Great nice appearance, workmanship aesthetic. I recommend!!!
Review translated automatically
Reliable opinion
I purchased a 12V turn signal interrupter. The product is solidly made, with durable materials that ensure long life. The interrupter works flawlessly, providing smooth and regular flashing of the turn signals, which improves visibility and safety on the road. Installation is simple and intuitive, compatible with most 12V systems on motorcycles and cars. Aesthetically it looks good, its small size allows it to be discreetly placed in the vehicle. The product is reliable and weatherproof, making it a great choice for anyone looking for a durable and effective solution for their turn signal system.
Review translated automatically
Reliable opinion
I ordered it not for mz-ki but suzuki ts 50 xk with 6v installation and as far as I know it should go up ( if it is like this:wzb.-voltage not reduced,szcz.-mass,+6 to the ignition and to the battery),the quality of the product is satisfactory but I recommend those who are considering buying to see the dimensions because it is easy to miss and then there may be a problem with the installation (it is quite large).Here is a link to the topic on the forum in which it is described how to connect.
Review translated automatically
Reliable opinion
I recommend this model of Polish regulator. It is much better than the blue one on 5 contacts! Charging is very good 12,6 - 13V at idle (on the blue regulator it was only 11,5 - 11,9V). The voltage regulator works great. I also have the same one in my other motorcycle and have been riding it for more than 9 years without failure! I highly recommend it! My motorcycle is a Mz etz 251 1990r
Review translated automatically
Reliable opinion
The motorcycle is a MZ ETZ 150 89r. The optical element of good quality. Only a little rework is needed to power the position bulb, because the original bulb mount to which the ground is connected does not fit the element. Due to the fact that the position bulb needs a separate ground cable, you simply have to make one and crimp a flat connector on the original power supply.
Review translated automatically
Reliable opinion
It's cheap, quality is average, but for the price it flashes. If you do not require it to be a one in 10 years purchase, but something that is expected to withstand the conquest of the review and the first encounter with another hard part after which it will break. This I think can be recommended. ^^ A good option for inexpensive restoration of equipment that is expected to stand more as an ornament than if used. :)
Review translated automatically
Reliable opinion
Interrupter decent, when you turn on the turn signal works without unnecessary delay. Workmanship as precise as possible. It works flawlessly. Terminals made very well, the connectors stick like glued, They are wide enough that you have to use force to slide the connectors onto them, which is a great advantage. This is a really solid and refined design.
Review translated automatically
Reliable opinion
I've been putting together a 1983 Etz 250 for a few days for a neighbor who is the first owner of this beautiful motorcycle. Unfortunately, the blinkers were not working, it turned out that the fault was the turn signal interrupter. Immediately with help came ,,gmoto,, fast delivery super workmanship, easy installation and beautiful aesthetics. Until it is nice to repair the motorcycle!
Review translated automatically
Reliable opinion
Jawa 350 model 634 1983. The voltage regulator does its job,finally the charging returned,so I can enjoy the ride. Assembly to this motorcycle requires drilling a new hole in the mount,as the existing ones do not coincide with those present on the motorcycle. Other than that, the installation is successful. I recommend this product !
Review translated automatically
Reliable opinion
Hello .Evaluating this product , I will write briefly . The product matched perfectly to my lamp not some counterfeit from the east , you can see that the material from which the spring is made is of high quality and I am sure that the glass mounted on this spring will certainly hold firmly in the housing of the lamp. I recommend for sure.
Review translated automatically
Reliable opinion
A weboldal tökéletes, minden igényt kielégítő. A szállítás még így is, hogy nemzetközi (Lengyel - Magyar) gyorsabb volt, mint sokszor Magyarországon belüli szállítás. A kifizetett alkatrészekről, a csomagom állapotáról folyamatos jelzést kaptam. Az alkatrészekkel 100 %-ban elégedett vagyok :-) *****+*
Review translated automatically
Reliable opinion
A weboldal tökéletes, minden igényt kielégítő. A szállítás még így is, hogy nemzetközi (Lengyel - Magyar) gyorsabb volt, mint sokszor Magyarországon belüli szállítás. A kifizetett alkatrészekről, a csomagom állapotáról folyamatos jelzést kaptam. Az alkatrészekkel 100 %-ban elégedett vagyok :-) *****+*
Review translated automatically
Reliable opinion
Headlight springs do their job perfectly, very well press the rim of the lamp to the reflector, they are bent at a slightly smaller angle than the original but this does not affect the quality and fit. I highly recommend gmoto store, very good quality parts and you can easily find everything.
Review translated automatically
Reliable opinion
Hi I am Patryk and I own a 1962 WSK 125 m06 z2 , and I buy all parts and accessories from GMOTO. The parts are always matched and good quality.They are well packed and protected in the package. I highly recommend this store just in time to buy parts for our vintage motorcycles.Regards
Review translated automatically
Reliable opinion
Simson s51B- front turn signal lamp shade The lamp shade is made of very good quality materials, the ethics is at a very good level. Assembly went well except for the holes which turned out to be a little too small after that everything is fine. I RECOMMEND
Review translated automatically
Reliable opinion
Simson s51 1984r. The lampshade fits perfectly into the blinker housing, it looks nice it is aesthetically made well performs its function. I am satisfied with this purchase as with others at G-Moto. I highly recommend everyone to buy from G-Moto store
Review translated automatically
Reliable opinion
Direction indicators made as in the original appearance of high quality material of course time verifies it better:) personally, I would recommend selling in a set with mounting screws because with the old ones there is always a problem because they do not look as necessary.
Review translated automatically
Reliable opinion
MZ ETZ 250.I am very satisfied with the purchase of lampshades for Mz. I ordered three new lampshades,because I had one original,but I will have to order another one.Because it is much nicer,and above all refreshed.I recommend heartily :)
Review translated automatically
Reliable opinion
Mz ETZ 251 of 1990 vintage . The product looks great and fits like the original. This is not my first time shopping at Gmoto and I am satisfied. There is everything I need for my motorcycle huge plus all in one place. I HIGHLY RECOMMEND
Review translated automatically
Reliable opinion
I am an owner of a 1983 Simson s51. The switch I purchased is of very good quality, the purchase was hassle-free and the shipping was very fast, the package arrived after 2 days. I heartily recommend this product and gmoto store.
Review translated automatically
Reliable opinion
The patches do not fit the MZ ETZ 250 because of the fit, the part that should push against the cam does not reach it, so you can not adjust the ignition (perhaps the reason is the old cam) although the old patches fit without a problem.
Review translated automatically
Reliable opinion
WSK 125 year prod 1980 KOS I am a satisfied customer,I am shopping for another time,I prefer contact with the seller and here is a very good service.I willingly and often browse the assortment of your store and I will certainly store more than once.
Review translated automatically
Reliable opinion
This interrupter is OK. I connected it in place of the old one and it works. The frequency is good. Only a small problem with the mounting. It does not fit in the original holder. However, this is not a problem just a simple tritrite and you are done. CZ 350
Review translated automatically
Reliable opinion