Motorcycle electrical & lighting
Romet Arkus 717 50 - Page 2
Manufacturer
Price
Sort
€9.07
Lowest price from 30 days before discount: €12.10
RMS Racing spark plug pipe, SAE 90°, black - Rms 24 633 0120
€6.03
Lowest price from 30 days before discount: €8.04
RMS spark plug pipe, M4 90°, black - Rms 24 633 0060
€4.98
Lowest price from 30 days before discount: €6.64
RMS Silikone spark plug pipe, M4 90°, red - Rms 24 633 0070
Browse by manufacturer
Products reviews
2019-03-21, 20:38
Krzysztof
The WM Motor battery stands out in several ways. First of all, it has a transparent top casing. We were a bit puzzled by this, because it looked like there was no electrolyte in it. But this is just an impression, because in batteries the electrolyte is in the form of gel. I-GEL - GEL ELECTROLYTE INSTEAD OF ACID WM Motor's batteries are filled with a dense gel instead of the usual acid. This is to prevent accidental leakage of electrolyte, which can cause unwanted corrosion. Gel batteries are called maintenance-free because the gel does not evaporate or volatilize, so the batteries do not need to be refilled with electrolyte. They do not need to be placed vertically and are more shock resistant. This type of battery works more efficiently than traditional lead-acid batteries and is more resistant to varying temperatures. It meets the requirements of starting current at temperatures from -30ºC to +50ºC. In batteries, the electrolyte is completely absorbed and immobilized by special glass mat separators. LCD DISPLAY Another distinguishing feature of WM Motor batteries is the LCD display. Thanks to the built-in chip, it allows easy reading of data and appropriate response to battery states. The LCD display allows full monitoring of the battery's operation, including indicating the voltage, informing about the battery's charge level, alerting when the battery is discharged and measuring the battery's operating time from the first connection.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-06-04, 17:38
Radzio
I have a 2006 Baotian bt49qt-9 scooter and before the coil was fitted it was muddling and sometimes dimming. Most simply put, it did not run evenly. So I ordered an "ignition coil tuning Chinese scooters GY6 4T", which as it turned out after installation a hit. The engine began to "smoke" less from the exhaust and began to run evenly. I recommend this purchase to everyone who has the same symptoms. Above all, it stopped "mulling" and became more sprightly. I highly recommend it!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-21, 14:23
Tomasz
The wrench is made of good quality materials. There is nothing to compare to the Chinese. The bolt, as for me, is good because I will not pull the candle too much, but if someone will have trouble unscrewing it can even put a screwdriver :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-09-20, 18:51
Krzysztof
Hello cordially. such a candle I screw in the engine of a motorcycle SHL m11 of 1966 and 1967 (WIND) and Junak M10 of 1963 and 1965. The candle works evenly both in the summer and winter seasons. Good product I recommend and greetings
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-01-02, 18:59
Mateusz
Router Metro City. Router brand capacity 50 year of production 2013 Mileage 10000. I bought the ignition module for the scooter and it helped me to give power and acceleration, the rating for the product is 10/10 I recommend a good product.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-02-11, 21:45
Krzysztof
The module is made of a very good plastic is perfectly matched to the connector despite the shocks nothing happens to it dodakowo ribs support cooling module I sincerely recommend this product
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-09-13, 21:08
jerzy
Super case company reliable and fast shipping I highly praise this company and highly recommend. I am satisfied as much as possible with everything I bought everything fits barton ranger clasic motorcycle
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-06-04, 07:52
Mateusz
The spark gap came in perfect condition with no complaints, it performs its function and gives a very good spark and I hope that with this quality of the product will last as long as possible
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-23, 18:59
Jakub
The bulb, like a bulb, shines, even very well. When driving at night it illuminates the whole road well, the color is rather yellow, in my classic it looks great.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-17, 09:28
Marcin
The coil does its job however the cable is a little too long for the Honda Dio but it's supposed to be a universal product so no surprises there
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-20, 15:30
Paweł
I have a moped dafier yankee 50cm product very well made and the starter relay works 100 percent in the moped
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-09, 10:47
Monika
Bemdix starter gy6 4t very good quality materials with attention to detail fits without any problem recommend to everyone
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-27, 22:16
Mikołaj
WSK M06 B3 "Hunchback" 1975, bulb like original from those years! :-) They shine well and replacement hassle-free.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-01-30, 07:16
Klaudiusz
Romet Ogar 200.Currently after 4 years of riding it was time for an overhaul. One of the things I replaced was the spark plug.During these 4 years I never once replaced the spark plug, because there was no need. Now, when the opportunity to buy came, I decided that I would buy the identical one I had, because it is proven, (I also thought about a new Spark F80, which was originally installed, but after reading reviews about new Sparks - I gave up). Of course, the old one still works, but nevertheless it's been a while and I just preferred to buy a spare just in case. The prudent always insured ;) In short: a very good candle for not much money.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-09-10, 14:41
Sebastian
Barton volcano 50 with the installation there was no problem I recommend only to add that in my model I would have a problem because the plugs were different in barton I had a square and the module half round so you can call it but it is easy to convert the plug in the electrical system you can go buy a new one or pull the pins and put them in without or just so you grind the plug to enter it and hold it I do not know maybe it is my fault or maybe a factory defect I do not know if it was my fault or maybe it was a factory defect, but after 3 days the module stopped giving a spark but fortunately gmoto company has a very nice staff and it is possible to come to an agreement :) .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-04-04, 21:24
Dawid
The battery I purchased surprised me very positively. I bought it only to re-activate the starter in my moto. However, when I opened the package (which came very quickly and efficiently) I smiled. The battery has served me for several months now and so far it works very well. The energy loss is very small, and this display and the sounds that warn of discharge complete my positive opinion. Simply put, for a low price you get a good quality and durable product. I highly recommend it.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-19, 15:43
Maciej
As for the performance of the module, I have no reservations, the most important thing is that it works and does not burn out and fits. The bike revs faster, which results in the fact that when starting from a standstill it has become lighter, it does not wonder after turning off the gas whether to go or wait a while. Only you have to be careful when plugging in if you had the original module with the cable on top. When connecting, you need to remove the black cable (+) from the cube after the ignition, otherwise it causes a short circuit and blows the main fuse.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-05-26, 07:40
Wiktor
Part I own a QUEST Q9 scooter and decided to stiunning it a bit to start with I removed all the locks and now I bought a C.D.I module when it arrived it was so well packaged it would survive any fall. After unpacking and putting it on, the scooter cranked to higher revs, and well the module itself looks cool, overall good quality and great fit. In the future I also plan to purchase from Gmoto.pl a larger cylinder and variator. I heartily recommend. :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-07-16, 21:09
Patryk
I bought a battery for my scooter zipp astec 50 battery made of good quality without any problem fits me. The display in the battery helps me a lot because I know when I need to charge it and what voltage I have to supply. Built-in alarm at very low battery drop gives a sign where it starts to squeal. Overall the battery is very cool. If someone would need it, I suggest buying this battery I highly recommend it
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-06-29, 07:12
Karol
MZ ETZ 250 1983 For the price, the wrench is really well made, so you can be sure that it will not fall apart at the first better unscrewing of the plug, as is sometimes the case with Chinese products made of thin sheet metal. The only drawback is the length of this pin - it should be about 5 cm longer. If the candle is screwed in tighter, you need to spin through a rag or replace it with a longer rod.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-10-15, 09:57
Jan
Small, sleek, handy. Thanks to the removable pin, we have the opportunity to significantly reduce its size, and thus pack it into a handy tool kit. It is not tall, so it will easily fit between the cylinder and the tank on most unicycles. The overall glossy galvanized finish makes a very good impression. In good conscience I recommend it!!!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-08, 08:10
Jan
The above module , fits almost perfectly to my Yamaha CW 50 Spy , after its installation the scooter got a better engine operation , and its performance ( and especially "screwing" in the revs ) gives a nice sound effect , as for aesthetics it is well-fitted , I would even dare to compare it to modules from a higher price range. I highly recommend this module is worth the money.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-09-21, 08:35
Hubert
Module very cool, changed the life of my scooter for new! When buying, I ask users to pay attention to the clip that is sometimes on the right and sometimes on the left at the scooter or it is not there as in my case. This, the clip can make it difficult for us to mount the module to the scooter, it is good that at the module it is not there because you can fit it on the right as well as on the left.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-04-23, 11:26
Jan
CPI Oliver Sport 50ccm 2005. Works and fits :) Thanks to this part, the long-awaited by me spark on the spark plug finally appeared. The new spark allowed me to start my equipment and cover thousands of kilometers. I'm curious to see how many thousands this rig will last, for now it has 30tys of them, 20 of which are the last 3 years :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-12-14, 07:28
Mateusz
MOTOBI ROCKY 50 year 2008 parts you can see that solidly made nowhere are broken all plastic parts are okey. Spark plug very solidly packed and well protected against damage. The parts are very aesthetically packaged and the appearance is also aesthetically pleasing. I had no problem with the assembly RECOMMEND.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-07-14, 19:57
Marcin
Module C.D.I tuning ribbed Chinese 4T GY6-I believe that this is the best tuning module for scooters available on the market.It improves the dynamics as well as speed significantly.You can feel that the engine has immediately a different torque-so-called down(info for people in the subject).If you want to surprise others with the qualities of your scooter this module is for you.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-07-04, 10:28
Gracjan
Ogar 205, Dezamet 023, 2-speed. As two people have written before, the bulb does not fit the ogar 205, it has too large a diameter first of all. To gmoto team: Please do not write that I should send the bulb back and there will be a refund because it is a waste of my time and yours well as shipping costs and the bulb cost only 5 zl.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-09-29, 09:50
Grażyna
hello,I am very satisfied with the module purchased from your company ie.GMOTO.pl the operation of the engine has improved,previously it was very sludgy,especially when starting on small hills,now the engine has what it was missing.The module has met my expectations.Do not combine with the removal of locks this module is enough.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-05-21, 17:19
Timi
The picture shows an old and original product that broke, I ordered a solenoid from here for a really cheap price (I was surprised myself), it is pretty much the same as the original one, works and flowers well. Thank you very much. And to all good future driving until summer 2025. And long miles with gmoto products, heh
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-03-15, 19:08
Dominik
The module is of good quality. The fact that Chinese and for Chinese scooters, but by the casing and plug you can see that it is not shoddy. For such money I recommend it. In appearance it is a bit poor. The downside is that they do not add rubber mounts to it in my old module this rubber had already broken and I had no way to fix it
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-08-20, 05:10
Tendl
When you consider that I have paid 3-4 times the price in other stores...it needs no comment how happy I am as a classic car fan to have gotten these lamps for this fair price. Great service perfect and fast delivery. Thank you gmoto. You have a new customer and fan. thank you
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-06-24, 14:52
Jakub
I currently have a Toros f16 scooter.One day my turn signals did not work so I ordered a turn signal interrupter because the previous one burned out installation was quick and easy.And then I bought a gas switch because the previous one did not suck in the fuel I bought the product was as described I am very pleased.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-05-28, 00:16
Rafał
Scooter 2017 Toros El Rio Fit 99,coma 8% The most important thing is that everything works.I AM satisfied with this store more than on allegro because here everything is described in detail before buying to which I fit all models listed is solid and clear .This store I like the MOST .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-07-14, 20:03
Marcin
Bendix starter GY6 4T-element failure-free, I have had the opportunity to install this element more than once in several already scooters and the operation has always been satisfactory.The assembly is made precisely and with good materials.Even after a long time of use does not show any problems.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-02-18, 16:42
Damian
The starter is highly recommendable, after disassembly the elements in which there is friction are well lubricated housing equipped with o-rings sealing also the weather conditions are not terrible for him in the kit there is also a screw to screw on the power cord.greetings
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-13, 19:15
Rafał
Gmoto is a professional company that I recommend . Quick implementation and the goods described actually fit. Immediately upon receipt I installed and it works flawlessly. If you are looking for parts that fit and at a good price for your unicycles then you have just come to the right company. I highly recommend!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-06-18, 13:15
Piotr
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-06-18, 13:14
Piotr
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-07-11, 03:33
Adrian
Motobi spider 4t scooter converted to 80cc. Before buying it I had a factory module with the lock removed and it had no power to run. After buying the module from moretti not only is it finally livelier, but also well cooled. As highly recommend for scooters that are converted.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-03-04, 05:36
Stefan
Like everything else, the ignition module is of very good quality and workmanship...and was also delivered quickly. I am very satisfied with all the parts I ordered and glad that I found your site. Here you can find spare parts that you won't find elsewhere.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion


































