Browse by manufacturer
Products reviews
2019-12-20, 08:50
Marek
Zipp quantum gt5 2013 I ordered two xeon bulbs. And when they reached me. One of them had a crooked shade (It's the blue glass). I put it on without touching the glass with my hands, of course. It was fun, but it ended quickly after 7 minutes of driving I had to go home on stoplights because there was a short circuit in the installation. I checked what was wrong and it turned out that one had reached the end of its life (visible in the photo). There was a horrible sweet smell coming out of the lampshade as well as from that bulb even though it didn't look burnt, that's what it was. And the 2 also did not want to be alone and 15 min of driving also made a short circuit and would not light up. Interestingly, the same smell accompanied 2, so from this I deduced that it was burnt and even swapping its place in the lampshade did not help.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-09-29, 12:32
Patryk
I recommend this product, the battery holds very well. Quality of workmanship in relation to price very good . Advantages : Lightweight Durable Price Disadvantages: The size of the battery pack is not very large due to which I had to put something under it in the glove box, So that it did not fly all over the compartment and the rubber strap could hold it. So far I have not noticed any other disadvantages Greetings ! I attach a photo showing its dimensions .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-29, 15:28
Patryk
Hello the spark igniter I purchased works very well I only had a problem with connecting to the station because the cables are a different color and with setting the platens. Other than that, the product performs very well I own a simson s51 and with this spark ignites without question Regards. :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-05-18, 16:39
Dominik
The bulb has the specifications as shown in the description,fits under the BA9S socket,It looks like a good quality product,but it remains to be seen,I attach a photo that may help someone in choosing the right bulb.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-02-05, 18:39
Mateusz
My machine is a 1982 ROMET OGAR 205 with a capacity of 50cc. Signal revelation, gives a slightly louder signal than the original so that everyone can hear it from a distance. The signal fits nicely to the frame of my ROMET.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-08-07, 08:24
Adam
Turn signals very good quality well fit and look I can sincerely recommend them to all owners of German classics and not only I am very satisfied with the purchase thanks
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-07-06, 13:41
Adamsky73
WSK 125 B3 1977. In the absence of the original signal - this one fits perfectly. It is smaller, but makes up for it with sound. Installation without problems - price and quality revelation.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-02-13, 06:52
Jacek
Purchased lampshade fits as well as possible, made aesthetically without any burrs like others from allegro, installation very fast handles hit the holes. I RECOMMEND
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-06, 09:30
Robert
I would like to give a good opinion about the bulbs but I can not because they did not meet my requirements because after two days they turned white inside and do not work .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-23, 18:59
Jakub
The bulb, like a bulb, shines, even very well. When driving at night it illuminates the whole road well, the color is rather yellow, in my classic it looks great.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-24, 20:45
Daniel
Simson s53 2001. The lampshade very nice very good match with red bulb and transparent blinkers perfect match I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-03-22, 11:37
Seweryn
I installed them in a bike but very good fit even in a simson only a few scratches but they fit very well good fit
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-07-24, 23:22
Kacperowsky
Simson S51 enduro 1990 lampshade is made of pretty good material but it is very well made and looks very good
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-06, 14:10
PAWEŁ
Pipe not bad but fragile fully shielded candle clamp only on the thread so the thread is destroyed price adekfatna to quality
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-25, 22:43
Zbigniew
The lamp is made very well. After it is screwed on, everything fits nicely. There is no problem alby connecting it.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-10-13, 14:33
Thomas
The indicators are basically OK, unfortunately one of the indicators was already broken in the packaging.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-27, 22:16
Mikołaj
WSK M06 B3 "Hunchback" 1975, bulb like original from those years! :-) They shine well and replacement hassle-free.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-07-20, 15:07
Miłosz
As for such a low price it is worth buying fits perfectly to Romet ogar 205 so far works well. recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-10-10, 13:46
Krystian
The color and brightness of the light satisfactory, however, burned out after three days, shining a total of about 3h.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-08-31, 21:34
Sławomir
Simson scooter 1980, quality on 4, used goods or return, because screws violated, fits moped.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-23, 16:42
Grzegorz
I have a Romet Router RM 125 motorcycle and the horn I purchased works great. It is very easy to connect and screw it to the motorcycle. The signal is so great that even Moses would not be ashamed of it during the parting of the Red Sea. In addition, it is aesthetically made and after a period of use could successfully serve as a paperweight on the desk of the President of the United States. I believe that at this price there is no equal, let alone more equal. I recommend with a pure heart.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-03-04, 23:37
Jacek
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-14, 22:09
Przemek
WRONG!!! If someone has nothing to do with money this is a great choice. After firing it came 2s and burned. And long and short. It is better to buy any for 5 zeta sle zeby it works. I heartily do not recommend. In these piebiadzach I recommend something that works and not something thanks to which you will have to return from a night ride without lights. Expensive, does not work, no sense, I do not recommend and sympathize with the buyers.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-08-22, 20:13
Mirosław
WSK 125 1985. I chose an electronic interrupter because the traditional one with a resistance wire used so far sometimes jammed while driving under the influence of vibrations - the indicators lit up with a continuous light. Now the problem has disappeared. Only its interruption frequency is a tad too high, but this is probably because it is designed for LEDs and I have ordinary two bulbs of 21watts per side. I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-01-01, 15:35
Krzysztof
I own a Romet C1 moped. I was positively surprised by the power of the light and its pleasant color. Unfortunately, it blinds other drivers and I changed to my old 25W "bubble". My "motorcycle" does not have high and low beam in separate shades,so I can not give it as a road light, however, if you own a cross etc., I recommend it. Mine is already waiting for this fate, only the cross is still missing
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-30, 09:48
Jacek
The spark gap for this price is quite Ok. (although it would be good to additionally varnish/protect the coils) After taking measurements in MY copy, all of them almost perfectly hold the standard, both resistance and generated voltage. The coil responsible for charging and the stop light, when connected by a rectifier block, gives 1.4A at idle and 1.8-1.9A at full speed.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-04-09, 16:36
Daniel
Ignition pipe bought for a WSK 125 motorcycle, at first glance it looks perfect, a very important advantage is the covers to protect against moisture or driving in the rain. Why aesthetics "could be better", because the workmanship is good, but not refined. The important thing is that it works as it should, and I am also very satisfied with the service of the GMoto store, also recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-04-14, 11:33
Michał
Hello. I own an ETZ 250 motorcycle - for it I also purchased the product shown above (4 pieces). Each of the bulbs shines well; they were not broken, did not require complaints. They fit 'tightly' into the BA7S holders - and that's good. There is then no risk of them slipping out while driving. Aesthetics leave nothing to be desired - a bulb like any other. I recommend this product.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-09-06, 16:45
Filip
Jawa 50 type 20, I recommend to everyone. At first I thought it would be disgusting to ride with a glowing pipe, but this is nonsense. If a person does not look closely, the light will not see. And from the point of view of operation it is a super solution. You don't have to unscrew the spark plug to check if there is a spark. I sincerely recommend and install in all my Jawkas and Rometas.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-28, 09:49
Robert
The products purchased are the audible signal, clutch cover gasket, oil pan gasket and oil filter. All the above mentioned parts are for Yamaha XJ600 Diversion motorcycle. Gaskets made bdb The sound signal in zinc does not rust and finally the sound is as it should be and as ram. Oil filter as it is a filter once again from hiflo company bdb.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2014-10-17, 17:16
Wanda
Despite the opinions presented by dissatisfied customers I decided to complete the order.I am pleasantly surprised by the speed with which the order was completed,the goods were carefully secured and consistent with the order.Let's hope for more such companies with THAT kind of service.Best regards to all those who will use Gmoto.pl company thanks to my opinion.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-18, 08:19
Pawel
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-18, 08:17
Pawel
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-03-18, 19:33
ADAM
The signal fits the WSK 125 motorcycle perfectly - it replaces the weak factory horn. I will place it in the housing of the original one and without changing the appearance of the motorcycle I will be sure that I can be heard ;) I recommend the product - it is well made and serves its purpose in 101%. For these few zlotys I could not find anything better.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-05-28, 00:16
Rafał
Scooter 2017 Toros El Rio Fit 99,coma 8% The most important thing is that everything works.I AM satisfied with this store more than on allegro because here everything is described in detail before buying to which I fit all models listed is solid and clear .This store I like the MOST .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-11-04, 19:01
Daniel
SHL M11 - interrupter inserted for the previous one that had run out, size-wise this one is a little bigger. It gives the impression of being more solid than the one I had before. Installation without any problem due to the fact that the entire turn signal installation was done by me (there were no factory turn signals in SHLs).
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-08, 21:36
Arkadiusz
MZ ETZ 150 year of production 1989. turn signals very nice. I had to shorten the screw this side of the handle because it rested on the mounting tube screwed to the lagi. When you prubub screw it in by force you twist the thread in the turn signal. I don't know if the original ones had holes in the tubes or shorter screws.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-04-03, 20:36
Jakub
Simson S51, 50ccm, 1989. I recommend the 12V bottle ignition coil, very easily and successfully passed the installation. The product 100% fulfills its purpose. You can see that the coil is decently made. The only drawback is the execution of the thread on the terminals 15 and 1 but just re-thread and it is ok. I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-03-30, 14:53
Grzegorz
My Simson S51, in which the turn signals were not working properly, did not look good. Diagnosis ? Replacement of Elba, which was delivered in express time and performs its task without reservation. Installation very easy, took literally a minute. At last I can safely go on the road :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-03-13, 14:40
Oliwier
I own a 2008 Yamaha TZR 50 brand motorcycle the installation of the product was fabulously easy no effort required the product fulfilled its task 100% if someone is looking for an ignition pipe I recommend this model, because it is an excellent quality product. I heartily recommend and greetings.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion





































