Forgot password
Order status
Free delivery from 150 euro
Motorcycle electrical & lighting
Simson SR 50 - Page 2
Manufacturer
Price
Sort
Options +2 
from 7
Browse by manufacturer
Products reviews
Bulb holder in My case completely unusable without self-intervention. Crookedly assembled, the glue (weld) only in one place, which after an attempt to insert the bulb the whole thing began to fall apart. In addition, the metal plate inside which the bulb's dynx is supposed to catch is not in the correct position, making it impossible to seat the bulb properly. (It falls out by itself) After taking it apart, correcting the factory and gluing it back together somehow it is usable, but still the bulb is still not seated very securely. (Photos from the state after purchase)
Review translated automatically
Reliable opinion
It does not fit my Simson. It does not have a cut-in due to which it does not give spark. Better to check the old magneto well and buy something better. Photo of old Magneto with characteristic cutout. I bought a new one without the notch but it had extra material inserted in the same place where the notch was and now the Simson has spark.
Review translated automatically
Reliable opinion
Money thrown down the drain in the front lights bulbs 5W and in the original I have 21W I thought what's the problem I'll put the old ones and here's the problem they don't fit, you can't screw on the cover of the turn signal, now on these bulbs blink very quickly you need to look for the orginals
Review translated automatically
Reliable opinion
The bulb has the specifications as shown in the description,fits under the BA9S socket,It looks like a good quality product,but it remains to be seen,I attach a photo that may help someone in choosing the right bulb.
Review translated automatically
Reliable opinion
The product as described. Dimensions in accordance with the original. Good workmanship. Everything fits perfectly recommend
Review translated automatically
Reliable opinion
Simson s51. Fulfills its purpose and on top of that a cool feature.
Review translated automatically
Reliable opinion
WSK 125 1985. I chose an electronic interrupter because the traditional one with a resistance wire used so far sometimes jammed while driving under the influence of vibrations - the indicators lit up with a continuous light. Now the problem has disappeared. Only its interruption frequency is a tad too high, but this is probably because it is designed for LEDs and I have ordinary two bulbs of 21watts per side. I recommend
Review translated automatically
Reliable opinion
Hello. I own an ETZ 250 motorcycle - for it I also purchased the product shown above (4 pieces). Each of the bulbs shines well; they were not broken, did not require complaints. They fit 'tightly' into the BA7S holders - and that's good. There is then no risk of them slipping out while driving. Aesthetics leave nothing to be desired - a bulb like any other. I recommend this product.
Review translated automatically
Reliable opinion
The products purchased are the audible signal, clutch cover gasket, oil pan gasket and oil filter. All the above mentioned parts are for Yamaha XJ600 Diversion motorcycle. Gaskets made bdb The sound signal in zinc does not rust and finally the sound is as it should be and as ram. Oil filter as it is a filter once again from hiflo company bdb.
Review translated automatically
Reliable opinion
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
Reliable opinion
Simson SR50, Unfortunately the quality of this product is poor, After lengthy investigations it turned out that the magneto was the culprit of the ignition problems, the huge radial runout caused that the spark was or was not, the engine does not work on this magneto. The difference in clearance on one side and the other side between the magneto and the stator up to several mm.
Review translated automatically
Reliable opinion
SHL M11 - interrupter inserted for the previous one that had run out, size-wise this one is a little bigger. It gives the impression of being more solid than the one I had before. Installation without any problem due to the fact that the entire turn signal installation was done by me (there were no factory turn signals in SHLs).
Review translated automatically
Reliable opinion
After changing the ignition from Platinum to Ducati Energy, the engine has an ignition advance and the Simson no longer runs like a typical Simson, but it turns better, fuel consumption decreased by at least 0.5l/100km. The only downside is that you have to work a little when setting it up, but overall I recommend.
Review translated automatically
Reliable opinion
I own a 1989 simson sr50 i ordered a 12v platinum spark arrestor complete with magneto. Everything would be good if the cables were not too short and I had to extend. The biggest problem is the wrong labeling of the isrovator: on the box it says 12V, and inside is a 6V isrovator.
Review translated automatically
Reliable opinion
Hello I have a lot of motorcycles in my garage, currently I am dealing with Jawa 350Ts, the installation went without a problem Jawa runs without any complaints .The next motorcycle in my plan to restore will be a 1976 Kmar Sport and I will certainly buy some parts in your store greetings
Review translated automatically
Reliable opinion
Lambretta C125 1951 year of production. The wrench is very good, short, only with it I can reach the candle. In addition, it has hexagonal sockets cut in the handle to handle bolts and nuts in sizes often encountered. The wrench fits very much with the climate of my old scooter.
Review translated automatically
Reliable opinion
Wsk 125 gil. Trying to restore it after 20 years of sleep in garage. Had to change spark plug. Chose tool randomly; I was a bit worried, that spark plug key won' t fit cause engine head looked kind of big, but it fit just fine. Spark changed. We have ignition :).
Review translated automatically
Reliable opinion
As for the lamp it's ok, but the turn signals are already poor, two were missing bulbs and the gaskets were so hard that they cracked when putting them on, while the other two were normal rubber but the glass fit required new screws (shorter).
Review translated automatically
Reliable opinion
Disappointed, the bulbs are the ones I ordered but the shipping is not cheap, instead of delivering it to the shipping address they left it at a collection point and I had to go personally to pick it up, I will not recommend Gmoto to any friend.
Review translated automatically
Reliable opinion
Romet ogar 205, 50 cm³, 1987r The wrench fits nicely with the old tools for my ogar, it's very similar to the ones from the communist era, the only downside is that it's not exactly bent and has a slight play on the spark plug itself, but other than that I recommend it
Review translated automatically
Reliable opinion
Merchandise does not fit sr50 because Magneto enters too deep o can not be tightened. Which results in damage to the wedge on the first firing attempt.When replacing the wedge, it turns out that there is a bigger groove in the magneto than the wedge.
Review translated automatically
Reliable opinion
Simson S51 E/4. A poorer and cheaper version of the S51 E in terms of electrical system, identical to the S51 N model. It had a 4-speed transmission. Production ended in 1988. Assembly mileage very easy.
Review translated automatically
Reliable opinion
The turn signals came to me in good condition but unfortunately I sent back due to the fact that the turn signals came on plastic mounts. The photo is not consistent with the delivered product. This was the case with mine
Review translated automatically
Reliable opinion
Aesthetics and quality leave a lot to be desired. A typical cheap Chinese product. On the other hand, it fits in place of the luminaire well. One can only hope that it will shine for more than a season.
Review translated automatically
Reliable opinion
WFM M06, high voltage cable transparent 50 cm, very good quality, flexible, because it is transparent you can see very well whether it is well screwed into the coil and into the pipe.
Review translated automatically
Reliable opinion
Replacement of a plug in a WSK 125 Gil, went without a problem, the key fits, and has the look of a key of the era and that was the point, to collect a set of keys similar to those of those years. I recommend
Review translated automatically
Reliable opinion
Sound signal made of good material wogule does not differ from the original. I recommend the product because it met my expectations and improved the aesthetic appearance of my ogar.
Review translated automatically
Reliable opinion
Very good alternative to change the original to LED looks identical and yet stands out in the midst of others, very nice appearance at dusk ;) highly recommend.
Review translated automatically
Reliable opinion
Wsk 125 1984 Parts fit great. Immediately wsk got shine :-) Company worth recommending, full professionalism and if it does not fit seamless return.
Review translated automatically
Reliable opinion
I installed in the Java 634-7 on the alternator excitation bulb and charging is much better, you can drive all the time at the lights without worrying about the battery.
Review translated automatically
Reliable opinion
Junak 902. the original lights after attaching the leather trunk is hardly visible. The lamp mounted on a self-made bracket. Now it is O.K.
Review translated automatically
Reliable opinion
renovation of the motorcycle wsk 125. Moto looks like new. It would not be without these parts. Great contact with the seller.I recommend among friends:)
Review translated automatically
Reliable opinion
Simply superb. I would never have thought that I could get these lamps for my vintage motorcycles at this price. I am simply thrilled, THANK YOU.
Review translated automatically
Reliable opinion
Wsk 175 M21w2 Interrupter works flawlessly.The previous one, which I bought complete with led bulbs, on the switched on engine gave a stroboscopic effect .
Review translated automatically
Reliable opinion
Simson S51 1982 year light bulb fits the counter. Well made illuminates the counter and turn signal light without any problem. Installation fast, I recommend.
Review translated automatically
Reliable opinion
Fuses bought for MZ during electrical repair which admittedly burned all of them, but better fuses than bulbs I recommend buying to spare
Review translated automatically
Reliable opinion
Everything ok I recommend allegrowicz, fast shipping goods as described. Transactions with such sellers are pure pleasure !!!
Review translated automatically
Reliable opinion
In my opinion very good workmanship Works very well is not a failure I have no comments about this item
Review translated automatically
Reliable opinion
The bulb, as it is gray bulb fits perfectly. A little weakly shines on the position, but for this it will take less current.
Review translated automatically
Reliable opinion
I purchased a fuse for a 1977 WSK 125 so-called humpback. It fits, works properly. It fulfills its function. I recommend
Review translated automatically
Reliable opinion