Forgot password
Order status
Free delivery from 150 euro
Motorcycle electrical & lighting
WSK 175
Options +3 
Browse by manufacturer
Products reviews
The lamp company makes sure that the customer is satisfied. I believe that the tail lamp for my wska is made of good quality products, not like Chinese replacements.The lamp is made with great accuracy and care, retained the details of the originality with which I am very pleased. Sufficient length of cable which allows convenient and fast installation. I think I should enjoy its brilliance for many years.
Review translated automatically
Reliable opinion
The lampshade is very close to the original. I would even say that a person who does not know what to look at will not notice that something is wrong. The embossing is identical. It is known that the inscriptions on the lamp will also differ. To the biggest difference between the original and this part that the store is the reflector. In the original it is flush with the rest and here convex. But I still recommend it. In the photo the original is mounted on the lamp
Review translated automatically
Reliable opinion
I bought this reflector for myself for a 2007 Yamaha Drag Star 650. I had a similar one before on my Intruder, so I decided to glue it here as well, not only for safety but also for beauty. I glued it on the rear of the passenger backrest. Made really precisely with convenient self-adhesive tape. The whole job two minutes, looks great, as if it was always there! Greetings Maciek
Review translated automatically
Reliable opinion
Greetings. I have used the light switch - zinc in my two motorcycles: A '63 Junak m10 and a '66 SHL 175. This product works perfectly in both cases. To the eye it looks excellent, but what is important is also a product that is easy to install and works correctly in further exploration. I recommend, in my case it works without complaint . Regards
Review translated automatically
Reliable opinion
WSK 1969 year b1, the so-called two-frame. This cover is nice because it is made of solid material, it was quite difficult for me to doggone hooks and a little to profile to the shape of the age-old lamp, but this is normal if it combines old after the transitions with new. In the end it fits and sometimes it rains, blows, dusts and the ignition is well shielded and still works. I recommend
Review translated automatically
Reliable opinion
The front lamp insert from Wesem, it looks very nice, there is nothing to complain about as far as the insert is concerned, while as for the tail lamp, it is aesthetically made, but there is no possibility of connecting a stop light, and it is a pity that there is no reflector as in the original, only a piece of sheet metal. Awiny bulbs without approval.
Review translated automatically
Reliable opinion
WSK 1969 year b1, so called two frame. The glass fits super well. I had concerns about whether it would sometimes sweep too much space in my lamp (I've had that happen before) but it's all as it should be. It works nicely, gives good light, bulb mounting also without problems. The look is also reminiscent of products from that era. I recommend and greetings
Review translated automatically
Reliable opinion
hello front lamp insert as well as the frame fit very well but the rear lamp is some kind of Chinese thing the spacing of the screws does not match and in general far from the original on the photo no1 original on the right rear lamp from g-moto.ps please take care of the details and relying on the originals we are restoring old motorcycles not Chinese vacuum cleaners :)
Review translated automatically
Reliable opinion
WSK M06 B1 1970. Coating very good and so many pluses. Requires a lot of work to fit the serrations to the holes in the lamp. In addition, the thickness of the sheet metal makes it difficult. Also, do not overdo it with the thickness of the rubber under the cover, because you will not have enough serrations to fix it.
Review translated automatically
Reliable opinion
WSK 125 M06 B3, 1984. The front lamp insert of very good quality, perfectly matched. As for the tail lamp, its workmanship is also very good. The only thing to complain about is the lack of possibility to connect the stop.
Review translated automatically
Reliable opinion
Pipe without comments. On the other hand, the cable (at this stage of installation I can not comment on the quality) is simply too short by about 10 cm. After installation, I may be able to connect the pipe to the carburetor.
Review translated automatically
Reliable opinion
WSK 125 B3 1983. Visually very good. Also chrome very aesthetically pleasing and durable. Matching to the original as well as currently manufactured optical element perfect.
Review translated automatically
Reliable opinion
The wrench may be minimally too long, although it depends on what motorcycle you use it for. Overall I am satisfied. In the photo SHL M11, for Romet Ogara 205 perfect.
Review translated automatically
Reliable opinion
WSK 125 B1 1969. Mount made very carefully and accurately . Fits perfectly and very good galvanic coating makes this small item worth recommending!
Review translated automatically
Reliable opinion
Romet Ogar 200 r.prod 1986. the switch fits perfectly. It works as it should and looks ok, also recommend at my place it works perfectly.
Review translated automatically
Reliable opinion
Yamasaki YM50-8 4T year 2010 installation of reflectors went very quickly not a whole minute it is difficult to get such reflectors with M6 thread.
Review translated automatically
Reliable opinion
Headlight spring fits Simson sr 50 easy installation nothing moves or falls out quality of material is very good .
Review translated automatically
Reliable opinion
Turn signals well made nice fit aesthetic look only bulbs need to buy 6v because they add with 12v bulbs
Review translated automatically
Reliable opinion
WSK 175 1986. When rebuilding my wski, the turn signals super fit and wonderfully convey a resemblance to the original.
Review translated automatically
Reliable opinion
Turn signals made aesthetically, beautifully presented, at this price I can recommend as much as possible.
Review translated automatically
Reliable opinion
The light springs were a perfect fit for attaching a light insert to the headlight bezel on my Moto Guzzi V50III.
Review translated automatically
Reliable opinion
Very good quality workmanship, fits my WSK 125 perfectly. The chrome on the frame is of very good quality.
Review translated automatically
Reliable opinion
GOOD QUALITY . HANDY ITEM . VISUALLY ALSO OK . MATERIAL FROM WHICH IT WAS MADE SEEMS
Review translated automatically
Reliable opinion
I do not recommend wole buy used. In the picture the black plastic is rubber. Lamp for one bulb. Trash.
Review translated automatically
Reliable opinion
I have purchased an ignition cover for my Wska 125 M06 B3 and so briefly and to the point: - visually it looks very good, although the quality of the plastic slider could be better while the chrome is first class - fit the cover with the holes in the lamp after a small correction with pliers, and here it should be noted that the overlapping of the plates requires more strength and technique because it is a hard material, but it is better to take a little trouble than to complain that it is plasticine.isn't it? - I like the aesthetics, there are no unnecessary parts of the casting and for the money I think it is worth buying. Regards K.
Review translated automatically
Reliable opinion
I thought for a long time what to write about the ignition key for WSKi. And I came up with it, here is my opinion: The key is flat, has a milled arrowhead, thanks to which we can start probably every WSK in the country, if the technical condition of such a WSK allows it to run ;) The handle fits perfectly in the hand and the hole will allow you to attach even the most bizarre key ring we can think of. Holding this key in your hand you have the impression that you are holding a key from a Ferrari parked in our garage :)
Review translated automatically
Reliable opinion
Hello I own a Romet ogar 200 the list of works to do as it is in 1987 vintage did not encourage to start work I started looking for parts and surprise gmoto huge parts great description affordable prices quality very good. Understandable descriptions cool kits. First purchase for 500 zloty in two days delivery. More parts in the basket and more and more knowledge Thank you and recommend. Gwalbert
Review translated automatically
Reliable opinion
Hello .Evaluating this product , I will write briefly . The product matched perfectly to my lamp not some counterfeit from the east , you can see that the material from which the spring is made is of high quality and I am sure that the glass mounted on this spring will certainly hold firmly in the housing of the lamp. I recommend for sure.
Review translated automatically
Reliable opinion
Junak M16 - the cartridge fits almost perfectly; the quality is incomparably better than the original from Rice (all Chinese plastic, frosted-milk glass - causing blinding light scattering of the bulb). Aside from the mismatched spring attaching the bulb holder, the effect of replacing the headlight insert is worth any money. Recommended.
Review translated automatically
Reliable opinion
A weboldal tökéletes, minden igényt kielégítő. A szállítás még így is, hogy nemzetközi (Lengyel - Magyar) gyorsabb volt, mint sokszor Magyarországon belüli szállítás. A kifizetett alkatrészekről, a csomagom állapotáról folyamatos jelzést kaptam. Az alkatrészekkel 100 %-ban elégedett vagyok :-) *****+*
Review translated automatically
Reliable opinion
Headlight springs do their job perfectly, very well press the rim of the lamp to the reflector, they are bent at a slightly smaller angle than the original but this does not affect the quality and fit. I highly recommend gmoto store, very good quality parts and you can easily find everything.
Review translated automatically
Reliable opinion
Purchase very solid and durable. Fits the ignition coil perfectly as well as the spark plug. I have not seen any ignition pipe that holds so tightly. The product is very well made, close to the original. The rubber on the pipe is also a very good idea, as it insulates the plugs from water, etc.
Review translated automatically
Reliable opinion
Hi I am Patryk and I own a 1962 WSK 125 m06 z2 , and I buy all parts and accessories from GMOTO. The parts are always matched and good quality.They are well packed and protected in the package. I highly recommend this store just in time to buy parts for our vintage motorcycles.Regards
Review translated automatically
Reliable opinion
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
Reliable opinion
Platinums fit after a slight grinding of the hole in the hammer, because it was too tight, after a gentle filing sits without any play, also gently had to bend the contact on the base of the interrupter to evenly contact the elements, after a moment of fiddling fits perfectly. I recommend.
Review translated automatically
Reliable opinion
Mosquito Mosquito s38 1975-purchased parts are of high quality in terms of workmanship, aesthetics, efficiency of operation -I recommend many motorcycles I assemble and with this company super to cooperate-mega efficient shipping 24 hours to the other end of the Polish b.good contact with the seller.RECOMMENDED
Review translated automatically
Reliable opinion
The cover is nice, but to fit this to the lamp in the humpback, I had to grind all the brackets and the contact surface itself, because it is flat (and the lamp is not). In a word, the fit is hopeless, but somehow it can be pushed in there and looks quite nice.
Review translated automatically
Reliable opinion
Ogar 200 88' The kit was purchased as a spare , no less I was hoping to receive a black cable and black pipe - arrived red cable and black pipe. This does not affect the operation of what, but I would prefer to receive everything in one color
Review translated automatically
Reliable opinion
The cable looks ok, maybe a tad too thin. Unfortunately worse is the pipe. The quality is poor and it had no transition at all when checked with a meter. Maybe the spark would jump, but wouldn't it reflect on the strength of the spark. After trying to repair it, the pipe broke.
Review translated automatically
Reliable opinion
The front lamp insert matches the old original lamp although this can no longer be said of the bulb, but after a little modification it shines very well. Tail lamp nothing to add nothing to add. The frame of the headlamp nicely you chrome and add flash to the lamp.
Review translated automatically
Reliable opinion