Forgot password
Order status
Free delivery from 150 euro
Motorcycle engine - parts - Page 68
Manufacturer
Price
Sort
€44.95
Simson S60 cylinder - 80179
Options +1 Inne warianty:
Inne warianty:
€4.27
Backlash sensor - 77428
from 948
Browse Motorcycle engine - parts - Page 68 by manufacturer
Products reviews
I bought 2 sets of cylinders. There was nothing wrong with one of them. On the second, the liner was honed at an angle. In the upper area of the liner, an approx. 3 x 5 cm area was not covered. One piston had the recesses for the valves milled at an angle. See photo. The other is obviously already an oversize piston. As I have access to appropriate machines, it wasn't too bad for the hobby project.
Review translated automatically
Reliable opinion
SHL M11 175 Lever very good quality preserved all dimensions and the same assembly is a pleasure fits like the original , and what is important is the galvanic coating which is a very high level I highly recommend
Review translated automatically
Reliable opinion
A set of rear gearbox bearings for a 4t scooter very good quality bearings very well made with attention to detail fit without any problem recommend to everyone
Review translated automatically
Reliable opinion
SHL M11 ( 175cc) , prod year 1963. - Discs of very good quality , no problems with installation . The clutch got a second youth! - Highly recommended. LWG!
Review translated automatically
Reliable opinion
I bought the lever for my motorcycle I am very satisfied with it because it is made of good material. I buy all parts on Gmoto I recommend
Review translated automatically
Reliable opinion
Product very well made great fit for motorcycle with 139qmb gy6 engine. The description of the goods is very accurate and with the real.
Review translated automatically
Reliable opinion
Washer+shaft protector kickstand 4t very good quality materials with attention to detail fits without a problem recommend to all
Review translated automatically
Reliable opinion
My engine had to be renovated with new crank, cylinder and piston also bought oil pump, so bought gasket sets for the entire engine. Jan
Review translated automatically
Reliable opinion
Cylinder MCN 80cm3 4T cylinder a very good class cylinder gives a lot of power I recommend to all who want to increase the capacity of the scooter recommended
Review translated automatically
Reliable opinion
A set of gy6 bearings very good quality bearings very well made with attention to detail fit without any problem recommend
Review translated automatically
Reliable opinion
Romet pony clutch discs good quality everything fit without reworking after assembly clutch works well
Review translated automatically
Reliable opinion
Manual gears in the Mosquito everyone knows and their ills too, so I did not expect miracles. My problem was a molded insert, but since I'm trying on a general overhaul I ordered the whole thing hoping that in the end I won't have to fight with the gears. After the first inspection, the quality of the alloy (aluminum?) does not throw off the quality seems quite fragile. This was confirmed during assembly. After assembling it came the moment to tighten the whole thing rigidly to the steering wheel. Unfortunately, I used too much force and the clamp that holds the menatke to the steering wheel shot off. Also, I caution against this, tighten with sensitivity! The whole thing makes up for it with a good fit, no extra drilling, grinding, etc. All screw locations drilled properly. Assemble, lubricate, lightly adjust and the gears go in smoothly, smoothly and, most importantly, do not fall out. Overall at this point I am satisfied despite the adventure with the clamp, we will see how the alloy will stand the test of time and miles.
Review translated automatically
Reliable opinion
Romet Kadet, engine 023 The clutch fits without reservation. When replacing the clutch you need to remember to pre-soak the disc in the oil in which it will work (in my case Lux 10) and to distance the basket from the simmer with a special washer. In my case, someone once forgot about this washer and the basket rubbed against the transmission. It is also worth buying a new shaft nut protection . After the proper insertion of the clutch press the spring and analyze the pin heads in the direction of rotation of the shaft . Well, and remember to readjust the cable after installation. I rate the quality and fit of the new clutch positively, at this price it is not worth buying individually, better as a set.
Review translated automatically
Reliable opinion
The clutch disks were delivered incorrectly. The quality corresponds to the price. The subsequent handling with the service department was very poor. I have still not received the correct clutch disks. In the meantime, I got the plates from another supplier. Unfortunately, I cannot therefore recommend Gmoto.
Review translated automatically
Reliable opinion
Hello, I got the order quickly, in the set were additionally a set of ring, but there was no gasket under the exhaust, In the picture there is a gasket but not such because there goes with paranita paper, flat, it fit perfectly,. I made out in 2 hours by flashlight .I offer to buy a bearing under the piston. TGB 101 scooter .super )) .
Review translated automatically
Reliable opinion
Hello I have a motorcycle romet zetka it may not be a super equipment but it is possible to ride I would like to give it a little bit of a boost that is why I ordered a section everything fits everything works as it should certainly I recommend this store delivery 11/10 instant fitting and workmanship at the highest level.Greetings to the whole team gmoto!!!!!!!
Review translated automatically
Reliable opinion
Generally everything is ok. except that for pocket bika when repositioning the cylinder it turns out that the original engine does not fit the bearing on the pin. The piston and piston pin are slightly larger, which makes it impossible to change.You still need to buy separately the appropriate bearing to fit the piston pin that we ordered.
Review translated automatically
Reliable opinion
I bought this set for my 1989 fireplace and frankly I am satisfied, I was not disappointed, the quality of materials is very good, solidly made, the fit is also perfect and aesthetics, I already know where I will order parts all the time, I highly recommend and greet you! :D
Review translated automatically
Reliable opinion
Very good workmanship, fit to the handlebars - the quality of the chrome handle satisfactory, I really wondered about the fit to a 30-year-old moped, but I rate 5+. Nothing is damaged, does not break off if only the installation is correct according to the art. Recommended.
Review translated automatically
Reliable opinion
ROMET CRS 50 (1997) with a HONDA MX 124cc engine from 1974 (and only 1 overhaul !!!) ŻBIK BOATIAN 49 . (WAS ) NOW IS 80cm3 2005 YEAR. KOMAR 49 1972 VINTAGE RIDDEN AFTER 3 ENGINE OVERHAULS .FACTORY PAINTING
Review translated automatically
Reliable opinion
Hello I bought the front sprocket cover black I am very satisfied with the purchase because the product from the seller is very good in general all products are hit in 6 aesthetically packaged so nothing gets damaged during shipping . I recommend 100% seller
Review translated automatically
Reliable opinion
Product ordered for a Chinese cross. In order to fit properly, I had to cut off the end at the bottom of the chain (uncut housing rubbed against the chain). The fit of the screw spacing 100 percent ok. The workmanship itself and the durability of the material without comments.
Review translated automatically
Reliable opinion
Moto Ventus Sport 4T year 2007 gaskets are very good quality,they are very well cut,not damaged,they are very well fitted to the engine housings,MCN gasket company I highly recommend,engine not thin you can see that the gaskets are of good quality pozdrawiam
Review translated automatically
Reliable opinion
Gmoto has a good quality foot starter, I myself own this one and I am a proud as well as happy owner of it, I am satisfied with it because it is made of good quality as well as it is very durable, I recommend this carrier starter to everyone.
Review translated automatically
Reliable opinion
The clutch fits and goes elegantly. Which is not obvious in replacements. I recommend. For how long it will last no one knows. Information for people. Remember to soak the discs in oil before installation overnight, so as not to burn the clutch.
Review translated automatically
Reliable opinion
pitbaike ducar 125cc I bought blindly because I didn't know if it would fit me , but it does . The package was very securely packed so there was nothing to destroy . I am satisfied with the purchase . I highly recommend .
Review translated automatically
Reliable opinion
Hello I own a Baotian 4t rocky 2007 50 cm after tiuning now 72 cm as you know more compression protection hoof needed solid and This just met my expectations compared to the previous I recommend.
Review translated automatically
Reliable opinion
products shown in the photo differ from the delivered shipment, for example, bearings the quality of manufacture of the cylinder gives much to be desired bad casting, grinding done probably with a concrete mixer sea you do not have a quality controller.
Review translated automatically
Reliable opinion
I recommend the limiter works only a small reservation about the installation instructions there is written to connect to the pulser, but it does not work you need to connect to the ignition module power cable that is black and red.
Review translated automatically
Reliable opinion
Yamasaki, 125ccm, 95r. High quality product, very accurately made, which is rare in the case of parts for Chinese gears. The lacquer is resistant to mechanical damage and high temperature.
Review translated automatically
Reliable opinion
Hello I have a motorcycle zipp pro 50 and the Cover fits perfectly. As for the workmanship I have no complaints because it is decent and quite hard made of aluminum. I recommend this product because it is worth buying! Great!
Review translated automatically
Reliable opinion
The kickshaft washer, complete with locking device, solved my problems with the scooter. There were no problems with their installation, the fit was excellent. The quality of workmanship at a very high level.
Review translated automatically
Reliable opinion
left side crankcase looks perfect for the right side crankcase I even got a needle bearing for the set, which I didn't even write anything about getting, but thank you very much it was very useful
Review translated automatically
Reliable opinion
Excellent product has served me for my four-stroke scooter g y6 engine and perfect perfect perfect I have come out very good it has served me it has fit me in the engine very well very perfect.
Review translated automatically
Reliable opinion
The product keeps its promises, there are no unpleasant surprises. So far the quality seems to be good, but time will tell how long it will last.
Review translated automatically
Reliable opinion
The product keeps its promises, there are no unpleasant surprises. So far the quality seems to be good, but time will tell how long it will last.
Review translated automatically
Reliable opinion
Zipp Steed 50 capacity 50ccm converted to 80 ccm set of gaskets ok all fit carefully matched dimensions engine does not leak when assembled on these gaskets.
Review translated automatically
Reliable opinion
I don't have a scooter but the parts fit a diesel water pump. The installation took place a few days ago everything is running smoothly. With these parts will be able to water the crops.
Review translated automatically
Reliable opinion
Zumico Quick 4t 50ccm. The set fit perfectly, the only remark is that the set was missing the bushing seen in the photo, which I replaced with the old one. Overall I recommend :)
Review translated automatically
Reliable opinion
The product is of very good quality despite the low price. It fits perfectly and has no shortcomings. In short, you do not need to overpay to have good quality. I recommend
Review translated automatically
Reliable opinion