Forgot password
Order status
Free delivery from 150 euro
Motorcycle engine - parts - Page 76
Manufacturer
Price
Sort
Options +5 
Browse Motorcycle engine - parts - Page 76 by manufacturer
Products reviews
Junak 104 2T 2013 Very nicely made cylinder for reasonable money If someone gets clogged with a serial cylinder, an interesting solution is to buy this cylinder, for this nozzle is 0.10 more than before and for a little money we have a really dynamic equipment I have already driven 2500 km on this cylinder without any reservations Please do not expect a colossal difference in power compared to the series in my opinion, thanks to this cylinder significantly increases the torque and a little power at higher revs. + Good price + Relatively good performance + Inexpensive way to increase power -Very loose rings which makes it hard to put the cylinder on (once you put it on they come off very nicely) - Sfloor locks are difficult to turn (the push-in ones are better) - Too bad there is no exhaust gasket in the set Final rating: 9/10
Review translated automatically
Reliable opinion
Scooter inca street 50 year of production 2009 mileage of about 14000 I ordered a cylinder + heads 70ccm reason to reduce fatigue of the engine, after opening the box with the parts I started by inspecting the workmanship, I watched all the channels in which there are in the cylinder the workmanship itself is very good, the very tinkerer went through very easily from disassembly after assembly it took me 40 minutes if anyone has the idea to repair vehicles themselves it will do it in a similar or shorter time, currently taken picture is not fully visible but they are newly purchased things
Review translated automatically
Reliable opinion
I own a 1963 shl m11, the bushing is well made, however it is oversized, it is too big for the connecting rod as well as too small for the pin. I would still recommend making a notch on it so that there is lubrication on the pin.
Review translated automatically
Reliable opinion
Fast delivery, very well packaged and complete in 4 words everything you need is. The company (site) wholeheartedly recommend and noti once again I will stop by and buy because it is good and specific
Review translated automatically
Reliable opinion
I bought the shaft from Gmmoto I put it on the engine Everything fits Engine runs like gold The shaft is well made and brewed, nothing beats, no knocking, no rubbing .ENGINE AS NEW I RECOMMEND
Review translated automatically
Reliable opinion
Simering Shaft Sealer left19.8x30x5 for 4t scooter very good quality with attention to detail it is worth replacing when overhauling the engine I recommend to everyone fits without any problem
Review translated automatically
Reliable opinion
In the pictures below you can see a comparison between the chain(left) and the original one(right), taken out of a 1967 shl m11. Everything matches. I can recommend.
Review translated automatically
Reliable opinion
Zumico EOS original 50cc currently 70cc on parts from this site performs very well durability good recommend highly.
Review translated automatically
Reliable opinion
4t 139 fmb ball bearing take-off shaft very well made with attention to detail fits without any problem recommend to everyone
Review translated automatically
Reliable opinion
Timing chain guide roller 4t 139 fmb very good quality recommend to everyone fits without any problem
Review translated automatically
Reliable opinion
Fits a Romet ogar 125 motorcycle and fits 1:1 in the original. After inserting the levers my romet has a lot of power
Review translated automatically
Reliable opinion
The 50 cm³ cylinder for the 139FMB 4-stroke engine is an excellent choice for anyone looking for a reliable and durable replacement or upgrade for their engine. The workmanship is precise and the fit is perfect - installation went smoothly. After installation, the engine runs perfectly again, with smooth running and good performance. The cooling fins ensure efficient heat dissipation, which increases durability. A particularly positive feature is the high-quality material, which promises a long service life. All in all, a top product with a great price-performance ratio! A clear purchase recommendation for anyone who wants to get their 139FMB engine back in top form. ⭐⭐⭐⭐⭐
Review translated automatically
Reliable opinion
Hello. Some time ago I installed a head gasket in a Jawa 250 (1960's kiva) bought from your store. Of course, it is not the original, but only a replacement of which I was aware. As for the diameter fit everything is ok. However, the thickness of the gasket is far too small. It's a good thing that I bought two and put on double (it shouldn't be done like that), but it worked, that is, it sealed. I think that you should sell gaskets with a thickness of 1-1.5 mm for this model. Greetings Jacek
Review translated automatically
Reliable opinion
Product arrived quickly and in full with fast processing and no complications. The price is fair and also very good value for the good quality. Shipping costs are also not as high as with other suppliers. As stated, the parts fit perfectly for my Romet Router WS 50 with four-stroke. I have installed everything new and everything is running great, just as I had hoped. I always order spare parts for my moped here and have never been disappointed.
Review translated automatically
Reliable opinion
I bought the cylinder, piston and head for a 2000 CPI Hussar scooter, changing the factory 50 cc to a purchased 70 cc. Visual assessment of the quality of materials and workmanship is not objectionable. Both the installation and the first start-up without problems. The piston and cylinder are only in the run-in phase, nevertheless, the performance of the engine is flawless, and the power has clearly increased (assessed in terms of top speed).
Review translated automatically
Reliable opinion
GB Motors Street 72ccm The product fit my head perfectly, you can say that it was so good that it fitted by itself :D Namely, it does not leak, everything plays as it should, after firing the motorcycle the old power returned and the pressure did not escape through the valves. I recommend the product as much as possible as well as the store, of course. He buys here all the parts he needs, because all are always here :)
Review translated automatically
Reliable opinion
Barton Fighter BTS 50. parts of very good quality. Delivery within two days. Quick installation and the motorcycle rides like new. I honestly highly recommend ordering parts from this store. I have personally ordered different things several times already and each time I was satisfied. And whenever I need anything I will only order here. Proven and worth the purchase. Regards.
Review translated automatically
Reliable opinion
Zipp Quantum, good quality cylinder, very good price. In general, I recommend so far everything rides like from the factory and I hope it will serve a long time. The scooter is much more dynamic, v-max has improved. Riding has become much more pleasant than on a 50cc I really like Gmoto store because I can order many different things with one shipment. And as for the cylinder I highly recommend
Review translated automatically
Reliable opinion
Hello when it comes to the product recently purchased that is the clutch basket with pressure is my husband is incredibly satisfied with this product.Product at a low price with good material .Your store in this regard is the best product mega super durable as described.I recommend this store to everyone.And more than once I will take advantage of buying from your store.
Review translated automatically
Reliable opinion
"After installing the 70 2T cylinder and head in my scooter, I immediately felt the difference. The scooter has gained power and acceleration, which makes riding more dynamic and satisfying. The solid workmanship of these parts gives me confidence that they are not only efficient, but also durable. Now I can enjoy a smoother and more exciting ride!"
Review translated automatically
Reliable opinion
I own a Junak M10 motorcycle. Visually the gaskets made neatly. I will be able to say something about the fit of all of them only after installation. I have only checked the seals of the side caps and the gearbox caps, and if they all fit like this it will be great. I give "Fitting" a rating of very good, by promotion, based on a "small sample".
Review translated automatically
Reliable opinion
The mechanism works very smoothly, and starting the engine is now much easier than with the old jerk. I also appreciate the fact that the installation was simple and did not require any specialized tools. After a few weeks of use I can say that it works well , but needed reinforcement . I recommend more to buy an aluminum jerk
Review translated automatically
Reliable opinion
I am very satisfied I read the opinion of these cylinders on the forums and I find that people do not rightly embed cheap cylinders I have and my Ferro 803 years like crazy I understand that someone has more money and flies thick with purchases of good branded parts I do not need it and I appeal to others Chinese does not mean bad greetings gmoto
Review translated automatically
Reliable opinion
I purchased the shaft for my Zipp Pro 50. For a long time in my motorcycle in 3rd gear it was very jerky. I decided that it might be to replace the cam shaft. And so I did I ordered it from gmoto.pl installing the gears go very smoothly without any complaints. To my eye the shaft is made of solid material. I recommend this product !
Review translated automatically
Reliable opinion
I own a Chinese chopper 50 cm, all purchased parts fit perfectly. Despite the fact that I am not a mechanic the help of colleagues and Yotuba allowed me to carry out the overhaul of the box, Photos of the elements of the box with dimensions super thing, makes it easier to choose .I highly recommend and thank you for your service
Review translated automatically
Reliable opinion
Kreidler Rmc-c 50cc scooter. I ordered this kit quality of workmanship very good everything fits nicely overall I am satisfied. I ordered this cylinder about a week ago. I just received it everything in is fine. I recommend to each individual and most importantly very fast shipping.
Review translated automatically
Reliable opinion
The screamer shaft looks decent and there is nothing to complain about the quality of workmanship. There was a problem only during installation. It did not fit my engine (152FMH 110cc). Overall, I can recommend if someone is going to buy it for a 50cc or for replacing the chiefs, which I also did myself.
Review translated automatically
Reliable opinion
Jawa 350 ts 638 Automatics, unfortunately, of poor quality. You have to rework the cable mount, because there is no physical possibility that it could get caught on something. It does not clutch, there is no adjustment. The only thing I could use from it was the forks, which I had broken in the old original.
Review translated automatically
Reliable opinion
I own a KTM go 50/70 kit is generally ok everything fits as a budget kit meets its requirements. I only have a remark because I heard that with harsh lapping the piston can melt. I would recommend lapping carefully and pour good oil for example motul 710
Review translated automatically
Reliable opinion
I have a scooter Cpi popcorn 50 the whole kit came quickly it was well packaged I put this kit in the motorcycle and everything runs very well the power increased a lot the kit is cheap and good I highly recommend it. Unfortunately I have no pictures but everything looked good
Review translated automatically
Reliable opinion
very fast shipping very easy assembly, I got the product just as it was shown in the picture without any damage recommend gmoto.pl :) everything was clear from and fast shipping and very fast contact with employees in case of detailed questions
Review translated automatically
Reliable opinion
Everything talks as it should, it took me three hours to put this kit on and on the road I recommend! I've been driving for a few days now, I've already driven 100 km and the power is zero oil burning and tp.Everything as described fits perfectly and goes even better!
Review translated automatically
Reliable opinion
There are hard and soft rollers, I personally prefer the soft one because the roller works in extreme conditions of temperature and oil hardens over time and can crack or there is a breakage of a part, therefore I choose the soft material
Review translated automatically
Reliable opinion
About this particular chain I can't say anything for now, but its predecessor lasted only 2000 km of very economical driving, which is as much as nothing. The clutch basket pinion also to be replaced, after the same mileage.
Review translated automatically
Reliable opinion
Hello, The crankshaft seems to be well made, to be seen in use. Packaging a little short, the connecting rod head was sticking out of the box. No apparent damage. Gmoto, a responsive team, fast delivery. Would recommend.
Review translated automatically
Reliable opinion
I have a 2013 Zipp pro 50/110. I ordered the clutch with pressure plate complete. Everything works flawlessly and everything fit. The clutch with the rest of the components is solidly made . I recommend and Greetings !!!
Review translated automatically
Reliable opinion
Super shipping of parts. Goods received exactly on the specified date. Very satisfied. Always happy to return. Second part for the handle also arrived within the specified time frame. Really very fast for a shipment from abroad.
Review translated automatically
Reliable opinion
The quality makes a very good impression. The look and fit are the same as the original part I replaced with it. Shipping was very fast, everything I ordered was securely packed.
Review translated automatically
Reliable opinion
yamasaki 110 2010r product arrived quickly and was complete clutch works flawlessly.I recommend this service because I have ordered parts here several times before and never had a problem with delivery or payment!!!
Review translated automatically
Reliable opinion
Good quality nickel, long-lasting. I recommend it. I tatolized 2690 km and it turns nickel no particular problem. Just alignment for slightly hard mounting, but nothing else to complain about.
Review translated automatically
Reliable opinion