Forgot password
Order status
Free delivery from 150 euro
Manufacturer
Price
Sort
Options +3 
Browse by manufacturer
Products reviews
I have bought many top ros cylinders from you, or the same model in black or grey ... the pink ones I repainted in grey for discretion ... very good value for money ... I prepared a few bikes for young people who really appreciated the performance ... unfortunately I don't have any pictures ... ke can take some disassembled cylinders and I'm going to reassemble one because I've just tightened a most 86 ... I mount them up to 88cc with vilo C45B90
Review translated automatically
Reliable opinion
Owner of a Supermoto Honda HM derapage 50 , purchased the product from your site I installed myself without much difficulty using an allen wrench , The biggest plus of the item is to match the style of carbon on the motorcycle properly blends into the background with delicate workmanship and during firing performs its proper function .
Review translated automatically
Reliable opinion
Cpi sm 50 vintage 2009 Cylinder made very well as far as budget is concerned. Quality very good everything fit perfectly. Aesthetically it had a couple of factory chips but it does not hurt anything. No reservations when it comes to a cylinder of such an amount :) just put it on and ride.
Review translated automatically
Reliable opinion
I have an Aprila mx 50 so I bought this product due to the reasons of the seizure of the previous one, which was already when I bought the motorcycle and I recommend this product works well and to keep it that way longer. I don't have pictures of how it sits now but I am mega satisfied.
Review translated automatically
Reliable opinion
Rieju MRT 50 2013 year Cylinder workmanship satisfactory for a budget kit.Seals could be better made make it difficult to install. Moto on this kit much more powerful.Much better bottom end. Overall I recommend.
Review translated automatically
Reliable opinion
The product is very well made in terms of aesthetics, fit as well as quality. I am very satisfied with the store and service. They have a large assortment for any type of motorcycle. Efficient and fast shipping.
Review translated automatically
Reliable opinion
I own a 2006 Cross Cpi Sx 50/90 , I purchased a cylinder so-called raspberry I am satisfied with the workmanship as well as the quality of packaging and completeness of what is needed for installation.
Review translated automatically
Reliable opinion
This product is really great I recommend it piss well mounted just not the clips for the piston otherwise otherwise it's really quality.
Review translated automatically
Reliable opinion
I purchased a Cylinder with a head of 90cm3 AM6- price-quality ratio I think excellent. And the assembly. If I had a helper and the right tools.
Review translated automatically
Reliable opinion
Rieju MRT pro 50 2010r I bought this product very good quality and workmanship as folding everything went smoothly and quickly very I recommend.
Review translated automatically
Reliable opinion
I own a 2004 Aprila RX 50 there was no problem with the installation, the old thermostat did not fit the cylinder. I recommend it works black raspberry.
Review translated automatically
Reliable opinion
I have a 2009 yamahe tzr70 with am6 engine the cylinder fit nicely without any difficulty. I highly recommend this kit.
Review translated automatically
Reliable opinion
I bought this cylinder as a replacement for the original one on my CPI SM 50 and it has really lived up to my expectations. The quality of the cylinder is impressive and I immediately noticed an improvement in engine performance. Description of the product: The cylinder is made of durable materials and is a perfect fit for the AM6 engine. With a bore diameter of 40.20 mm and a volume of 50 cm³, it is an ideal solution for those who want to keep their engine optimized without compromising on durability. Installation was simple, thanks to the precise fit and included installation instructions. Vehicle: I installed this cylinder on my 2006 CPI SM 50 You have to remember to take off the black gasket thingy though, I forgot to do that
Review translated automatically
Reliable opinion
The cylinder is very well, the defect that I find is the paint finish as it does not have a professional finish.tendrian to put a little more time to leave the product well painted and the cylinder head has the thread of the spark plug, the thread of the temperature sensor and then takes another thread that does not bring the screw to close and no water out I think that screw should come in the kit as if they come all joints and segment.por lo demás bien muchas gracias y un saludo.
Review translated automatically
Reliable opinion
I own a Husqvarne/CHRacing WXE 50 with a 2007 AM6 engine. Unfortunately my cylinder was seized and with help came the Gmoto website where I could buy the same cylinder but from WM Moto instead of the predecessor (NoName).The difference? The one from WM has a better fit of the piston and ring after measuring the gaps.Its channels are more precisely made (on the predecessor there were pieces of casting left).The price as right,I highly recommend the product.
Review translated automatically
Reliable opinion
In the serial engine still makes sense this gasket, and if you are playing with larger capacities it is not worth buying because the engine has higher temperatures in my engine after 5 motoring hours the gasket melted, and somehow I did not push hard, I did not do long journeys, nor did I pull on the rezo. If it's for the series then yes and if someone wants to 90tka then I recommend more to buy a radiator fan and cut the gasket from copper
Review translated automatically
Reliable opinion
Hello I recommend this product because of its unreliability. The cylinder with the Head can withstand a very long operation of the engine at high speed.I can confidently recommend this product due to the fact that this is the third time I bought this cylinder and I was not disappointed the previous 2 times it lasted up to a year. This is impressive for such a product at such a price. Go ahead and buy you will not be disappointed :)
Review translated automatically
Reliable opinion
CPI cross motorcycle converted to a larger capacity. The cylinder kit fit perfectly there was no problem with installation. Everything was included nothing was missing. The yellow color of the kit highlighted the lines of the Cross. We often order various cylinder kits on Gmoto and there has never been a problem with the quality of workmanship. Customers are satisfied with the quality of the parts. I recommend
Review translated automatically
Reliable opinion
I own an Aprila RS 50/90 On these gaskets I have already driven 600 km Even after cranking it to maximum revs everything holds, nothing spits out, nothing leaks From the moment of unpacking you can see the solidity of the material, and by now my moto confirms it Buying these gaskets=Zero problems and joy of riding I personally highly recommend 10/10 !!!
Review translated automatically
Reliable opinion
Good product, easy to install, very good torque at low revs, but a higher piston-cylinder clearance would be better because I had to tighten it several times. The piston was scratched in the administration area, but the cylinder didn't get any milk for the price, so it's a good product.
Review translated automatically
Reliable opinion
Aprilia rs50 98r- the quality of the gaskets is very poor, they do not fit (those from the cylinder) on the head, they are made of the cheapest rubber. I would advise you to withdraw this set from sale, because only the gasket under the clutch cover and between the cylinder and the carter fit, and the rest is suitable for trash :)
Review translated automatically
Reliable opinion
Rieju mrx freestyle 50 / 70 of 2008 ordered the kit fires on the kick works evenly the only drawback was the lack of 4 o-rings for the pins were instead 2 gaskets for the outer edge of the head. Other than that, everything super easy to install did not cause any problems personally recommend
Review translated automatically
Reliable opinion
The gaskets super made, they all fit in place, I am very satisfied, they typically fit vehicles with am6 engine and more. I can confidently recommend them to anyone looking for gaskets well made and compatible with motorcycle
Review translated automatically
Reliable opinion
Suzuki TS 50 XK 1991 after changing the engine to minarelli am6 because the parts are more available. The build quality of these gaskets is good, but I don't like the packaging. I had to struggle a bit to get them out. That's the only downside.
Review translated automatically
Reliable opinion
The product solidly made , after the installation of a cylinder with a piston of increased capacity , the motorcycle gained power , this kit is 100% ideal for tuning your motorcycle,the kit contains all the necessary components for proper installation , I recommend .
Review translated automatically
Reliable opinion
I ordered a cylinder for aprila mx 50 from 2002 year cylinder looks great very fast to install what went without any surprises and failures motorcycle perfectly starts perfectly cranks on revs how to recommend.
Review translated automatically
Reliable opinion
I'm still very happy with my purchase, it's the third or 4th time I've ordered and I'm always satisfied! just the packaging isn't very solid but I've never had any problems or damaged products. Sincerely Steph
Review translated automatically
Reliable opinion
Nice product, solid cylinder good piston for two rings. Everything you need is included even a sleeve for the exhaust to increase the diameter. Good price. In my opinion, the most reasonable purchase will be this kit.
Review translated automatically
Reliable opinion
Hello I would like to highly recommend here this BEAUTIFUL and cheap replacement for AM6. As for its price, the quality is adequate to it and the fit is 1:1 to the original AM6 cylinder. I would highly recommend this product to you :)
Review translated automatically
Reliable opinion
The quality of the bearing is very good , without any reservations. It is well-fitted into its place without any unnecessary play. Aesthetics in the best possible order, price to quality. I am satisfied with this product.
Review translated automatically
Reliable opinion
Mbk x-limit 2003 70cc. I ordered the kit came as expected but when I took it out of the box the cooling hole was chipped. Paint of poor quality and rings like plastic.
Review translated automatically
Reliable opinion
The set is as fine as possible. Everything fits into its place. The quality of the materials used for production very good as well as aesthetics. Greetings and recommend the purchase.
Review translated automatically
Reliable opinion
From buying a cylinder and installing it in the motorcycle, the motorcycle goes like a shot. Very fast delivery right to your door. I highly but highly recommend this cylinder because it is very cheap.
Review translated automatically
Reliable opinion
I have an aprilia rs I put the cylinder on everything correctly And wanting to start it jammed I saw back to the cylinder And it was all scratched And jammed in one place do not recommend the product
Review translated automatically
Reliable opinion
The parts I bought recently gmoto.pl are very good I recommend the seller I have already bought more than once and I am satisfied with the purchased parts from gmoto.pl I highly recommend the seller
Review translated automatically
Reliable opinion
Aprilia rs 50 1998r super made raspberry, resurgent edges of the exhaust window, no comparison better than from the competition where even the gaskets did not fit
Review translated automatically
Reliable opinion
I am very satisfied with the whole set. Both the cylinder as well as the piston and rings solidly made. Even the intake channels quite well made, the kit as described.
Review translated automatically
Reliable opinion
I did not receive the ordered product, I have no idea if it is the fault of your company or the courier company. When it comes down to it, I will not order any more parts from your company
Review translated automatically
Reliable opinion
I have an april rs 50 from 2002 I have replaced several things in it. The gaskets I bought are of very good quality and easy to install. I rate the product as very good.
Review translated automatically
Reliable opinion
The quality of the basket very good, the quality of the sliding sleeve well-fitted only a pity that the set does not include a nut and lock washer, but this is a detail.
Review translated automatically
Reliable opinion
Other models of
- Generic Trigger 50 X 2011
- Generic Trigger 50 X Competition 2011
- Generic Trigger 50 SM 2011
- Generic Trigger 50 SM Competition 2011
- Generic Trigger 50 SM One 2011
- Generic Trigger 50 X 2012
- Generic Trigger 50 X Competition 2012
- Generic Trigger 50 SM 2012
- Generic Trigger 50 SM One 2012
- Generic Trigger 50 SM Competition 2012
- Generic Trigger 50 SM Competition 2008
- Generic Trigger 50 X Competition 2008
- Generic Trigger 50 X 2009
- Generic Trigger 50 SM 2009
- Generic Trigger 50 SM Competition 2009
- Generic Trigger 50 X Competition 2009
- Generic Trigger 50 X Competition 2010
- Generic Trigger 50 SM 2008
- Generic Trigger 50 SM Competition 2010
- Generic Trigger 50 X 2008
- Generic Trigger 50 X 2010
- Generic Trigger 50 SM 2006
- Generic Trigger 50 X 2006
- Generic Trigger 50 SM 2007
- Generic Trigger 50 X 2007
- Generic Trigger 50 X 2017
- Generic Trigger 50 X 2016
- Generic Trigger 50 X 2015
- Generic Trigger 50 X 2014
- Generic Trigger 50 X 2013
- Generic Trigger 50 X Competition 2013