Forgot password
Order status
Free delivery from 150 euro
Motorcycle engine - parts
Moto Magnus Ym Viaggio 50 4T
Manufacturer
Price
Sort
from 4
Browse by manufacturer
Products reviews
I installed this kit on a Romet ZXT 50 moped (vintage 2019), and it works perfectly. The biggest challenge with the installation was changing the timing chain and replacing the engine pins with the ones included in the kit. To change the chain you need to: 1. remove the magnet wheel housing so that it shows whole, as in the attached photo. 2. you need to somehow lock the magneto wheel to unscrew the magneto mounting screw. I was able to do this with a filter wrench on a strap that I found at a DIY store in the car section. I tightened the strap, and held the plastic handle in the opposite direction from the direction of unscrewing the screw with a regular wrench. This required a very large amount of force, but it worked. 3. after removing the nut, use the tool for removing the magnet wheels on 139fmb engines, available here on gmoto.pl. Screw it on, and then tighten the bolt firmly. This also required a lot of force. Next, we remove the magneto and be careful not to let the starter clutch pebbles fall out of it. 4.We remove the starter with the chain (remember to pull off the metal protection first. 5.Then we unscrew the screws to get to the timing chain. On my ZXT 50 model (2019), there were very strange screws and I was forced to force them out with a larger bit and unscrew them. Of course, I had to replace these bolts afterwards, but there are super bolts available here as "Seal cap bolt". The second problem was unscrewing the old pins and installing the new ones. Without special tools, this can be easily done by screwing in 2 size 10 nuts. And the one closer to the engine hold with a 10-gauge wrench, and unscrew the other one. The same way you can screw them on. The cylinder and head work great, there was a set of gaskets and spare valve seals. For this kind of money I highly recommend it!
Review translated automatically
Reliable opinion
I put a 110 engine into a 2013 Barton Fighter 50 eco. The engine started and runs well.Not matching are :front sprocket(the 14-tooth one seems to have a different pitch because the chain jumps) , gear shift lever,foot starter and sprocket cover ( you have to cut it to fit ) . You also need to replace the air filter in addition. Another thing you need to get used to is the gear layout - neutral at the highest and the other gears down ( N-1-2-3-4) .You also need to put an additional line to the suction because in the previous carburetor there was a lever control directly on the carburetor.And besides, there is power :) . Greetings.
Review translated automatically
Reliable opinion
Hi. I purchased this product from your store at first I was skeptical because the price was very low but when the package arrived I was very pleasantly surprised by the quality of all the components and their fit also the whole kit was complete and ready for assembly. At the end I will add that everything works very well my bike got a second better life :)
Review translated automatically
Reliable opinion
I have a kinroad mini chopper the engine was falling apart and I bought a new engine at Gmoto where it was the best deal.I disassembled the old one and put the new one on.Everything fit perfectly,in my opinion any one could do the same as I did without any help.Gmoto is the best online store today I order and tomorrow it is already at home.Bomb.
Review translated automatically
Reliable opinion
So I ordered a 110cc engine, 4-speed motor works well in terms of power and you can also ride it nicely, the engine works beautifully at speed, the engine fits perfectly to zipp xrace. If you think to enlarge the engine (replacement )this is the engine I recommend greetings .
Review translated automatically
Reliable opinion
Motor very well packed on receipt, complete with accessories, easy to start up and immediately operational. Tested unloaded before fitting to motorcycle, it flips like a charm! I recommend both the product and the site!
Review translated automatically
Reliable opinion
I ordered a crankcase for a Junak 902 - although it is listed as "fits to" on the item page, unfortunately it is not a perfect fit. Unlike the original, it does not have an input for the shift sensor cable.
Review translated automatically
Reliable opinion
So the product is of mediocre quality, it's very rough, there's play everywhere and the segments supplied don't correspond to a 110cc but rather to an 88cc. I absolutely do not recommend this product.
Review translated automatically
Reliable opinion
Motor super, quality of workmanship also very good. Fits like a glove in place of the old motor. Speed of shipping surprising. Already on the second day the package was with me. I recommend this store.
Review translated automatically
Reliable opinion
Zumico GR200. The engine fits perfectly, I had no problems in mounting it to the frame. The engine runs perfectly, smokes from a shot. Fast delivery. Recommended.
Review translated automatically
Reliable opinion
Romet ogar 202 valves fit perfect fit after reaching them nothing leaks burns on touch 3 sec starter and burns bdb recommend in 100% :)
Review translated automatically
Reliable opinion
incredible motor i recommend it runs very well my bike starts at a quarter turn and with the akra line it has become a monster
Review translated automatically
Reliable opinion
Perfect engine adapted without modification, superb finish and works very well, fast delivery and well protected.
Review translated automatically
Reliable opinion
Very good engine, frankly it works perfectly. I'll be recommending one next month for my second bike.
Review translated automatically
Reliable opinion
No possibility of replacing the timing chain for the 139FMB engine which turned out to be too long . Not recommended.
Review translated automatically
Reliable opinion
- very good value Moretti kit. - fits the 139 fmb engine for magpower r-stunt the chain and cylinder pins sold in this kit are essential because the kit raises the cylinder+head assembly by about 4 to 5 mm so the original chain and pins are too short. - be careful with the 4 pins, 2 are longer to fit or the 2 cylinder guide spacers have to be fitted as they fit into the engine block. - as already indicated in other comments, this kit is complete except for the oil seal between the cylinder head and the cylinder, which is not supplied. - For your information, in my case, the original 50cc starts on the fly, now with this kit I haven't managed to start it yet, but I think the problem is that it's a Euro4 with an ecu and an electric injector, so changing the original MEV1-030 A injector for a MEV1-080 injector to bring in more fuel still doesn't start, I think the ecu needs to be re-mapped, I'm continuing my research to make it work. I'm going to miss the good carburetor that was so easy to change for a bigger one.
Review translated automatically
Reliable opinion
To make it all have arms and legs we will start from the highest to the lowest rating. Aesthetically everything looks very good :) The quality of materials I do not rate excellent because such is not (when trying to mount the cover to the front sprocket, the cover broke under not much force). The fit of the materials to the kit was the weakest, partly due to a packing mistake which can be forgiven, of course, but the biggest problem was with the valves. After adjusting to 00.6 and 00.8 (intake and exhaust) and driving about 20 km, the valves were in worse condition as originally installed from the previous set installed 2 seasons ago, the outlet in the head for the muffler is too narrow and you need to install a washer, grind the outlet in the head or grind the muffler. The set was missing the orings. After replacing a few parts from the old set to the new set, everything laughs and even better as I wanted The fault does not lie with the store, but with the manufacturer, who gave asses
Review translated automatically
Reliable opinion
Hello My vehicle is a 2008 Kinroad Sprinter. Its engine capacity is 50ccm. Unfortunately, it is not a speed demon .So I decided to purchase at Gmoto.pl store, a full set to increase the capacity of the engine ie: head , cylinder , piston , rings , pins, etc. from 50ccm to 110ccm. After the installation of the purchased parts I am very impressed,the quality of the material from which the parts were made and the fit of the parts.Everything fit very well .So the installation of the parts was very fast and pleasant.Now it remains for me to calmly reach the engine and then we will see what this beast can do :) I really recommend the product and the store . Greetings Dawid
Review translated automatically
Reliable opinion
Engine received quickly, there was a lot of oil in the box but that's because of the carrier, otherwise the engine is great, I mounted it on my masai greystone 50 and it's really plug and play, you just have to connect the cables. On the other hand, the double-branch gear selector doesn't fit on the masai greystone and neither does the kick, so I kept the ones on the original engine, but otherwise everything fits perfectly. I'm really satisfied with the engine and with Gmoto! I highly recommend it!
Review translated automatically
Reliable opinion
⭐️⭐️⭐️⭐️⭐️ Top motor - absolutely recommendable! This is now the 3rd engine I have installed - and as always I am completely satisfied. The price is more than fair for the quality on offer. The workmanship, performance and durability are impressive across the board. Shipping was super fast, everything was well packaged and arrived without any problems. I can recommend this engine to anyone who wants to make their moped faster and more reliable. A clear recommendation to buy!
Review translated automatically
Reliable opinion
My motorcycle is a Junak 901, capacity 107 cc. I highly recommend this kit, aesthetics of workmanship 10/10, quality 10/10, fit to the crankcases 10/10, the motorcycle continues to ride like it rides until it whistles, it seems to me that on this kit a little faster :D I have nothing to complain about, VERY RECOMMENDED !!! Probably the best set on the internet ! I looked everywhere, but such a complete set I have not yet found anywhere ! Take it while it's warm :D And while the price is so low :D
Review translated automatically
Reliable opinion
very fast delivery was pleasantly surprised . To the product looks very good exactly as described . Was of the opinion the motor is produced in Taiwan . This is not so product in China. Well look ma times . Will install the engine in a KIKKER 5150 . the current one with the semi-automatic is not my taste . hopefully it has the power of 12 hp as stated in the description .
Review translated automatically
Reliable opinion
This is the first time I've ordered a piston from this site, and I have to say that I'm clearly not disappointed. The piston is in very good condition, there's no trace of scratches or anything else, plus everything is very well packaged, nothing to say on that score, and the rings fit superbly, they're not damaged or broken at all, nothing at all. I'm going to put this on my Masai scrambler 50cc with a 70cc cylinder kit.
Review translated automatically
Reliable opinion
I own a Junak 901 rs tuning set of 50 to 110 gave positive results first start it smoked and very strongly blue after about 10 minutes it started to calm down and smoked a little white after driving about 50km it did not smoke at all the motorcycle became stronger stronger and more sprightly it achieves about 90km/h on the front gear 16 and the rear gear 38 the producer adds two more sealers to the valves in the head no hidden Watches
Review translated automatically
Reliable opinion
I received a complete set, nothing was missing. Quality and workmanship at the level of the original parts dismantled, with the fit was not the slightest problem either. Only mark on the head the one for setting the timing, a little faintly visible, but after 5 minutes found, and as if someone also did not notice it is on the outside at 8 o'clock
Review translated automatically
Reliable opinion
This tuning kit, which I purchased from GMOTO store, turned out to be the best in terms of: price, workmanship, fit, and aesthetics. I assembled the whole tuning kit there were no problems with it, very easy assembly. Now I am waiting for everything to arrive. I heartily recommend GMOTO store, and of course this tuning kit 110.
Review translated automatically
Reliable opinion
Very good, very good engine, I am happy to have ordered on this site, I recommend it, good direction of purchases and payment easy and simple delivery on time, good model.,,...,................................I recommend......................................................,..........................,
Review translated automatically
Reliable opinion
Cool actually finished kit. In the store I got the information that there is no need to replace the shaft (as long as the previous one is in very good condition), and indeed it is. The piston does not reach the very end of the cylinder, but the compression is good, and the gear works, so for me it is ok. The sound of the machine has also improved significantly.
Review translated automatically
Reliable opinion
Junak 902 2011r when replacing the cylinder for 110 you need to change the crankshaft power is greater as well as the combustion, but it is certainly better to have 110 than 50 through which even in the sand will not pass. When installing, be careful of the threads in the head because it is not too strong material you need to tighten in moderation.
Review translated automatically
Reliable opinion
Zipp vz 50.2016.Previous vehicle kingway king, rode it 75,000km. The puller works well in its purpose. The screw could be sharpened which would not cause damage to the thread when removing the magnet wheel,but skillful application does not cause any problems.Regards Daniel.
Review translated automatically
Reliable opinion
I ordered an engine for a 110 capacity motorcycle I got what I saw on the website the company gmoto concrete reliable conscientious I have a couple of motorcycles and only here I do my shopping I recommend if someone is wondering there is nothing to buy boldly goods of 1 class without sciema what is in the description you buy and you have really recommended
Review translated automatically
Reliable opinion
Good aluminum quality, piston rings are very easy to install and the piston only needs minimal break-in as it already fits very well. Disadvantage: Aluminum is not as durable as a steel piston, but the cylinder is not damaged as much in the event of piston jamming
Review translated automatically
Reliable opinion
Mega cool puller for 20 days I could not pull off the magnet wheel in the motorcycle KXD 125 I unscrewed the screw and then turned the puller and the wheel came off by itself there was no need to give so much pressure puller for the magnet wheel I recommend 10 out of 10 very durable cool design. I recommend :D
Review translated automatically
Reliable opinion
The quality makes a very good impression. Shipping was very fast and everything I ordered was securely packed. Really helpful for installation and removal. For me, 1000 times better for the price than sending the nut off with the hammer and driver.
Review translated automatically
Reliable opinion
I run a repair store for single-track vehicles and sometimes I use Gmoto.pl, I am satisfied with the products offered in Gmoto.pl store, I recommend other users of single-track vehicles, parts offered by Gmoto are suitable for repairing single-track vehicles, the price is adequate to the quality.I recommend
Review translated automatically
Reliable opinion
Hello, The valve clearance seems to be of good quality. Only the exhaust valve head is slightly smaller in diameter than the original one. See after running in if the contact surface is sufficient. Gmoto, a responsive team and fast delivery. I recommend Gmoto.
Review translated automatically
Reliable opinion
It is a complete set which fits perfectly and I had no problems with fitting it, I didn't even need a file to scrape off the excess casting, as it happens in such cast parts. I ride with it to this day, which is about a year now, and so far it promises to be great.
Review translated automatically
Reliable opinion
Runs fine, pulls really well. However, I think it shakes a little when you get up to 8000 rpm, so I do not do that. I have geared the moped on the chain, so the rpm comes down. Coming down, but it can easily pull an even higher gearing if I want to go faster. Now driving approx. 85kmt
Review translated automatically
Reliable opinion
Product compliant, with all the components needed for assembly, threaded rods that hold the cylinder head and cylinder longer, to fit perfectly with the original lower engine. All gaskets (base and cylinder head) fitted too, just perfect!
Review translated automatically
Reliable opinion
The paper ones not very decent though would have sufficed,but unfortunately they were glued to the film so that I destroyed most of them trying to peel them off [I did it very gently].The only thing that came in handy for me was the head gasket,exhaust and orings.
Review translated automatically
Reliable opinion