Forgot password
Order status
Free delivery from 150 euro
Motorcycle engine - parts
Romet Kadet 50
Manufacturer
Price
Sort
Options +4 
from 3
Browse by manufacturer
Products reviews
The piston installed in the engine S38 003. Included in the kit is the piston, rings, pin and safety features. Installation of the piston went without any problems, the pin goes in with a finger as it should be which pleased me. There is an arrow on the piston, which must be towards the exhaust which makes it easy to install and you don't have to look for where the front and back. Under driving, the piston does not swell, it rides very well, the rings hold and the piston itself is so well made and welded that the engine does not heat up excessively during prolonged driving. Compression is exemplary and the engine has plenty of power. I rate the quality of the piston, fit and aesthetics at the highest possible level, as this piston does its job 100%. I recommend it as highly as possible.
Review translated automatically
Reliable opinion
Capital overhaul of the engine Romet Kadet. Bearings ok. Sealers ok. Pistons ok Rings ok. Carburetor ok. Gaskets fit badly. Cylinder of average quality, lack of chamfering at the beginning of the sleeve which causes difficulties in installation, rings can be easily damaged. Channels made imprecise. Below are photos of the seals and the cylinder. For comparison, the photo shows the old factory cylinder next to the new one.
Review translated automatically
Reliable opinion
Romet pony m-2 parts of fairly good quality after assembling the bike fired up for the 2nd time, so the fit of the cylinder piston is very good, despite the problems associated with the bearing, I am very pleased.motorcycle rides until nice.More than once I will return here for my rummobile parts I heartily recommend this site, there is a larger assortment of parts for romet than on other sites :D
Review translated automatically
Reliable opinion
The crankshaft is made really carefully and precisely fitting it in the crankcase is almost perfect.For Romet Kadet fits perfectly will regain its power and will go thousands of kilometers for sure. I will gladly recommend it to others who are going to buy this crankshaft.
Review translated automatically
Reliable opinion
The piston in a nice manufacturer's box, which positively surprised me.The piston is not objectionable visually,in a nice polished finish: a set of rings, pin protection and a pin that has a good fit.Price very cool.
Review translated automatically
Reliable opinion
Romet 205 2b. It looks very massive and I don't see any weak points. Tested so far on a dozen "kicks" - Works ok, the frets fit perfectly with the new shaft. A little rubber deviates from the standards of the "classic", but it is ok.
Review translated automatically
Reliable opinion
SHL M11 175 Lever very good quality preserved all dimensions and the same assembly is a pleasure fits like the original , and what is important is the galvanic coating which is a very high level I highly recommend
Review translated automatically
Reliable opinion
Romet Komar 3 1975 Dezamet 023 engine--As original, top of the bolt flash which also looks cool,it is worth buying the old ones are often battered battered from the keys.I got a better product than I imagined.
Review translated automatically
Reliable opinion
My machine is a 1982 ROMET OGAR 205 of 50cc. The seals fit well on the 2 speed engine. I installed them all in place and finally feel that the engine is completely tight.
Review translated automatically
Reliable opinion
Hello super store very good customer approach fast shipping and.Shipping tracking is on the + and parts for my project super sure I will use again .chief super and simple and not like my .
Review translated automatically
Reliable opinion
hello super store very good customer approach fast shipping and.Shipping tracking is on the + and the parts for my project super napeweno I will use again gaskets for this price super.
Review translated automatically
Reliable opinion
Komar Sport year 1975 model 2361 poj 50. bushings made of good materials, fit perfectly (engine S38 egg). After lubricating the rubber part with oil, the bushing enters without problems. I recommend
Review translated automatically
Reliable opinion
Thread reduction used to repair the Romet head, fits most of the communist vehicles, it is easy to repair the damaged head yourself, all you need is a drill and a threader of the right size.
Review translated automatically
Reliable opinion
Well, I buy a lot of products from this store , I have never yet been disappointed parts well welded, very good quality, in good conscience I recommend parts on 6+. Greetings Kacper
Review translated automatically
Reliable opinion
Romet Komar 3 1975 Dezamet 023 engine---The bolt is nice and good looking with a washer included, worth buying if only for the sheer aesthetics and good non-fatigued bolt head edges.
Review translated automatically
Reliable opinion
Piote I bought the necessary parts for a major overhaul of a 2 speed komar romet .everything great After assembly it fired up after 5 kicks .the ordered parts arrived quite quickly POL
Review translated automatically
Reliable opinion
Motorcycle 50M2 1983. Shaft perfect dimensionally. The bearing in the connecting rod head is also quite solid, but it is worth looking for a more expensive equivalent. "Hot/cold" assembly without problems.
Review translated automatically
Reliable opinion
Romet Ogar 205, the shaft fits without a problem, nice fit, and there was no problem with installation, bearings the same. Piston and cylinder well made and fit.
Review translated automatically
Reliable opinion
Romet Komar 3 1975 Dezamet 023 engine Everything fits well looks fulfills its purpose, well packaged, always buy to spare and it is always good.
Review translated automatically
Reliable opinion
I bought the lever for my motorcycle I am very satisfied with it because it is made of good material. I buy all parts on Gmoto I recommend
Review translated automatically
Reliable opinion
The discs I purchased are excellent. After putting them on, you can see a significant difference in the performance of the clutch. Workmanship in good condition. I highly recommend :))
Review translated automatically
Reliable opinion
Very good workmanship heartily recommend. These clutch discs for rometa 50t1 or ogar 205 and motorcycle I am very satisfied. With the workmanship.
Review translated automatically
Reliable opinion
Clutch discs recommendable quality of materials as well as workmanship is at a high level. Thanks to these discs my Romet Kadet regained its power.
Review translated automatically
Reliable opinion
Romet Komar 3 1975 Dezamet 023 engine--As original only ze new, it is worth buying because it can wear out, no reservations.
Review translated automatically
Reliable opinion
Romet Komar 3 1975 Dezamet 023 engine---Fits and performs as it should always buy a spare.
Review translated automatically
Reliable opinion
Quality shaft made very well and accurately! There was no problem with seating it in the bearings.
Review translated automatically
Reliable opinion
It is ideal for a Romet komar motorcycle. The workmanship quality is very good. The dimension is good. I recommend
Review translated automatically
Reliable opinion
This is the second time I used such a reduction. The first time as well as the second time it fit perfectly. I recommend!!!
Review translated automatically
Reliable opinion
All git except what's in the picture
Review translated automatically
Reliable opinion
Manual gears in the Mosquito everyone knows and their ills too, so I did not expect miracles. My problem was a molded insert, but since I'm trying on a general overhaul I ordered the whole thing hoping that in the end I won't have to fight with the gears. After the first inspection, the quality of the alloy (aluminum?) does not throw off the quality seems quite fragile. This was confirmed during assembly. After assembling it came the moment to tighten the whole thing rigidly to the steering wheel. Unfortunately, I used too much force and the clamp that holds the menatke to the steering wheel shot off. Also, I caution against this, tighten with sensitivity! The whole thing makes up for it with a good fit, no extra drilling, grinding, etc. All screw locations drilled properly. Assemble, lubricate, lightly adjust and the gears go in smoothly, smoothly and, most importantly, do not fall out. Overall at this point I am satisfied despite the adventure with the clamp, we will see how the alloy will stand the test of time and miles.
Review translated automatically
Reliable opinion
This set of gaskets is the basis for any major overhaul of the ogar 205.The gaskets are of the correct size adapted to the factory dimensions of the various parts of the engine. Precise placement of the holes, after installation there is no unnecessary excess material sticking out. The price is at such a low level that it's not worth it to do hand-cutting, which is what some moped parts dealers offer. In a stationary store in my area I saw this set three times more expensive. In short: if you are trying on an overhaul, take it blind. Romet Ogar 205, model year 1987
Review translated automatically
Reliable opinion
The kickstand for a Romet motorcycle is an indispensable component for easy engine starting. Its solid construction guarantees durability, and its fit to the motorcycle makes it easy and convenient to maneuver. Aesthetically, it looks good, adding character to the motorcycle. Thanks to the kickstand, engine starting is fast and trouble-free, which is important especially in more difficult conditions. This is a practical and functional item worth having, ensuring that the motorcycle will start without problems every time. I recommend
Review translated automatically
Reliable opinion
romet pony m2 head gasket is made in good quality and fits well and what's more I know that 2 weeks ago I bought a gasket on allegro and that one was of such poor quality that at higher speed as well as with higher engine speed it was simply blown out and I had to drive my motorcycle I was very pissed but my friend recommended me this site and I bought a gasket here and I will tell you that my friend has had a gasket bought on this site for 2 years and everything works fine I just recommend it
Review translated automatically
Reliable opinion
Romet ogar 205, the shaft is of great quality for such a price shelf I am very pleasantly surprised by it. All dimensions are accurately reflected with the original so there is no problem with mounting in the crankcase or seating bearings on it. The product came neatly packaged in a styrofoam extrusion. I can't help but recommend this shaft to everyone who doesn't want to spend more money on more expensive shafts, but wants to be sure of good quality. The quality/price ratio is very positive.
Review translated automatically
Reliable opinion
I would recommend this site to anyone who wants to restore or repair an old as well as newer motorcycle. The site is perfect for people who are passionate about automobiles. The package came in no time, well packed. In my opinion, this site is better because of the inclusion in the package of a form in the event of return of goods, however, I do not think anyone uses it because this site sends what is in the picture and that immediately after placing the order. I heartily recommend this site to everyone !!!
Review translated automatically
Reliable opinion
Let me start by saying that I made a gift to my son - the purchase of a motorcycle. It is known that I wanted a motorcycle in the original - not after renovation. It is known that Romet in the original has to break down. I found G-moto. It is clear that you can not get along with everyone, but you can piss everyone off. But not with them. I ordered a lot of parts because you need to protect yourself. Shopping here is a pleasure and each part seems to be tailor-made. And delivery-practically overnight. You guys are great. We need such sellers.
Review translated automatically
Reliable opinion
Romet Ogar 205 50/60 87 Thanks to the very good quality of the parts purchased, my bike runs perfectly. It rides like crazy is not afraid of hills or pits. Now nothing will break for me as such quality parts I buy. And such a cylinder is a great thing as it gives a kick is and fun. The carburetor works superbly and dispenses fuel well for romet. If the head is matched, the spark on the spark plug is also great. The bearings have matched and the movement of the piston is perfect.
Review translated automatically
Reliable opinion
Romet Ogar 205 Red 1991 I will describe the crankshaft from my list of purchases of parts of which there were (22 items) crankshaft. the product is of very good quality installation went well and without major problems. before installing the bearings on the shaft I would advise you to freeze it well thanks to this the material will shrink and the bearings will slightly enter the shaft. between the bearings should be a spacer so that the bearings do not contact.
Review translated automatically
Reliable opinion
Romet komar 1975, I ordered from this exact link the clutch twice in two separate orders. One came perfect, the other was so large that it completely did not fit and had to be carved. Overall the quality of the plug jesy very good. I suspect that the whole problem stems from the fact that parts for old romet engines are mixed up, and should be segregated by engine model, not motorcycle model.
Review translated automatically
Reliable opinion
When ordering this product I was going to get a SEGER RING !!!(it's a kind of circlip which has a slightly different look and in some cases is a better solution than the usual protection) And I got what ? the usual pin protection which you get together with a new cylinder and piston in a set . So that how to sum it up what is in the picture is not what I received. So I do not recommend !!!
Review translated automatically
Reliable opinion